Igwe ọkụ Radial LX-3 Line Splitter

Daalụ maka ịzụrụasing the Radial LX-3™ line-level audio splitter. We are confident that you will find that it exceeds all expectations in terms of sound quality and reliability.
Tupu ịmalite iji LX-3, biko were nkeji ole na ole gụọ akwụkwọ ntuziaka dị nkenke wee mara onwe gị na njikọ dị iche iche na atụmatụ LX-3 na-enye. Maka ozi ndị ọzọ, biko gaa na radial websaịtị, ebe anyị biputere ajụjụ a na-ajụkarị na mmelite nwere ike ịza ajụjụ ọ bụla ị nwere. Ọ bụrụ na ị ka na-ahụ onwe gị chọrọ ozi ndị ọzọ, nweere onwe gị iziga anyị email na info@radialeng.com na anyị ga-eme ike anyị niile ịzaghachi na obere oge. LX-3 bụ ihe nkesa na-arụ ọrụ dị elu nke ga-enye gị ọtụtụ afọ nke ọrụ na-enweghị nsogbu mgbe ị na-enye ogo ọdịyo kacha mma. Nwee obi ụtọ!

Atụmatụ

1. NDỤMỌDỤ PAD: Na-ebelata ntinye site na -12dB iji kwe ka ejikọta akara ọkwa ọkwa-ekpo ọkụ.
2. Ntinye XLR/TRS: Ngwakọta XLR ma ọ bụ ¼” ntinye.
3. Site n'ebuli elu ala: Na-ewepu pin-1 ala na mmepụta XLR.
4. SITE EKPERE: Mmepụta ozugbo iji jikọọ na ndekọ ma ọ bụ sistemụ nyocha.
5. ISO mmepụta 1&2: Ntugharị dịpụrụ adịpụ na-ewepụ hum & buzz kpatara loops ala.
6. Nhazi Ọgwụgwụ akwụkwọ: Na-emepụta mpaghara nchebe gburugburu jacks na switches.
7. ISO GROUND LIFT: Na-ewepu pin-1 ala na mmepụta XLR.
8. Ọnweghị mpe mpe mpe akwa: Na-enye ikewapụ eletriki & igwe ma na-egbochi unit ahụ ka ọ ghara ịfegharị gburugburu.

GỤKWUOVIEW

LX-3 bụ ngwaọrụ na-agafe agafe dị mfe, emebere iji were akara ngosi ọdịyo dị larịị ma kewaa ya na ebe atọ dị iche iche na-ewebata mkpọtụ ma ọ bụ weda ogo ọdịyo ahụ. Enwere ike iji nke a n'ọtụtụ ngwa dị iche iche, site na ikewa mmepụta nke mic preamp ka atọ dị iche iche compressors ma ọ bụ mmetụta nkeji, ka kewaa mmepụta nke a console na otutu ndekọ ngwaọrụ. N'ime LX-3, a na-ekewa mgbaàmà ahụ ụzọ atọ, n'etiti DIRECT THRU, IOSLATED-1 na IOSLATED-2 XLR. Nsonaazụ abụọ ahụ dịpụrụ adịpụ na-agafe na ihe ntụgharị Jensen ™ adịchaghị, nke na-egbochi DC voltage ma na-egbochi buzz na hum site na loops ala. Ihe atọ a niile na-egosipụta mgba ọkụ na-ebuli elu ala nke ọ bụla, nke na-enyere aka belata mkpọtụ ala ala, yana ntinye PAD -12dB na-enyere aka mebie ntinye ọkụ na-ekpo ọkụ ma gbochie ibufe ibu.

Ịmekọrịta njikọ

Tupu ịme njikọ, hụ na agbanyụrụ sistemụ ụda gị ma gbadaa njikwa olu niile. Nke a na-egbochi nkwụnye nkwụnye ọ bụla imebi okwu okwu ma ọ bụ ihe ndị ọzọ nwere mmetụta. LX-3 na-agafe agafe kpamkpam, yabụ na ọ chọghị ike ọ bụla iji rụọ ọrụ. LX-3 nwere njikọ ntinye XLR/TRS nchikota, nke ejiri eriri pin-1 ọkọlọtọ AES, pin-2 hot (+), pin-3 oyi (-). Ị nwere ike jikọọ ntinye ziri ezi ma ọ bụ nke na-enweghị isi na LX-3. Mwepụta ndị dịpụrụ adịpụ ga-abụ akara ngosi ziri ezi mgbe niile, ebe mmepụta kpọmkwem nwere ike ịhazi ma ọ bụ na-ezighị ezi dabere na isi mmalite ntinye.

Ihe nkwụnye ntinye

Ọ bụrụ na ị nwere mgbaama ntinye ọkụ na-ekpo ọkụ nke ị na-eziga na LX-3, ị nwere ike itinye pad -12dB ka ọ kwatuo mgbama ahụ wee gbochie mgbagwoju anya. A na-eme nke a site na iji mgba ọkụ PAD, ọ ga-emetụta mmepụta nke mmepụta LX-3 kpọmkwem, yana ma XLR dịpụrụ adịpụ. Ọ bụrụ na ịchọrọ ibelata ọkwa na ntinye dịpụrụ adịpụ, ma debe mmepụta kpọmkwem na ọkwa nke mgbaàmà mbụ, enwere jumper dị n'ime nke ị nwere ike ịhazigharị iji mezuo nke a. Ka ịgbanwee ọrụ nke mgba ọkụ PAD, ka ọ ghara imetụta mmepụta kpọmkwem, soro usoro ndị a:

1. Jiri igodo hex wepụ skru anọ ahụ na-echekwa mkpuchi nke LX-3.
2. Wepụ ihe mkpuchi ahụ na LX-3, wee chọta jumper nke ime dị ka egosiri na foto dị n'okpuru.
3. Bugharịa jumper n'elu ka ijikọ atụdo 2 na 3, nke a ga-ekwe ka mmepụta mmepụta gafere PAD.

N'iji ebuli ala

Mgbe ị na-ejikọta ngwaọrụ abụọ ma ọ bụ karịa, ị nwere ike ịhụ hum na buzz nke loops ala kpatara. Nsonaazụ dịpụrụ adịpụ na LX-3 nwere ihe ntụgharị Jensen n'ụzọ mgbaàmà ha, nke na-egbochi DC vol.tage na-agbaji ala loop. Otú ọ dị, a na-ejikọta mmepụta ahụ kpọmkwem site na ntinye nke LX-3, ma ị nwere ike itinye aka na mbuli elu na mmepụta a iji wepụ ala ọdịyo ma nyere aka wepụ buzz na hum na mmepụta a. Mgbanwe ndị na-ebuli elu ala dịkwa na mpụta ndị dịpụrụ adịpụ iji nyekwuo mbelata nke mkpọtụ loop ala.

Onyonyo dị n'elu na-egosi ebe ọdịyo na ebe aga nwere ala eletrik. Dị ka ọdịyo ahụ nwekwara ala, ndị a na-ejikọta iji mepụta loop ala. Ihe ntụgharị na elu ala na-arụkọ ọrụ ọnụ iji kpochapụ loop ala na mkpọtụ nwere ike.

NGỌRỌ KWESỊRỊ MGBE ỌKWU

Nhọrọ J-RAK™ rackmount nkwụnye ọkụ na-enye ohere ka edobe LX-3 anọ ma ọ bụ asatọ na nchekwa akụrụngwa 19 ″ ọkọlọtọ. J-RAK dabara na Radial DI ma ọ bụ nkewa nke ọ bụla, na-enye gị ohere ịgwakọta na dakọtara ka achọrọ. A na-ewu ụdị J-RAK abụọ ahụ site na nchara 14 nwere nchara enamel.

Igbe ọ bụla kpọmkwem nwere ike ịdị n'ihu ma ọ bụ azụ n'azụ na-enye ohere ka onye nrụpụta usoro nwee XLR's n'ihu nke rack ma ọ bụ azụ, dabere na ngwa ahụ.

J-CLAMP
Nhọrọ J-CLAMP™ nwere ike ịgbanye otu LX-3 n'ime akpa okporo ụzọ, n'okpuru tebụl, ma ọ bụ n'elu ihe ọ bụla. Ejiri nchara 14 wuo ya na ngwụcha enamel sie.

FAQ

• Enwere m ike iji LX-3 nwere mgbama igwe?
  Mba, a haziri LX-3 maka akara ọkwa ọkwa, na ọ gaghị enye arụmọrụ kachasị mma yana ntinye ọkwa igwe. Ọ bụrụ na ịchọrọ ikewapụta mmepụta igwe okwu, Radial JS2™ na JS3™ mic splitters bụ maka ebumnuche a.
• 48V sitere na ike egwu ọ ga-emerụ LX-3?
  Mba, ike phantom agaghị emerụ LX-3 ahụ. Ihe ngbanwe ahụ ga-egbochi 48V na ntinye dịpụrụ adịpụ, mana mmepụta ozugbo ga-agafe ike phantom azụ site na ntinye nke LX-3.
• Enwere m ike iji LX-3 nwere akara na-ezighi ezi?
  Kpamkpam. LX-3 ga-agbanwe mgbama na-akpaghị aka ka ọ bụrụ ọdịyo ziri ezi na ntinye dịpụrụ adịpụ. Mwepụta ozugbo ga-egosipụta ntinye, ọ ga-abụ nke na-adịghị mma ma ọ bụrụ na ntinye adịghị nhata.
• Achọrọ m ike iji kwọọ LX-3?
  Mba, LX-3 na-agafe agafe, na-enweghị mkpa maka ike.
• LX-3 ọ ga-adaba na J-Rak?
  Ee, enwere ike itinye LX-3 na J-Rak 4 na J-Rak 8, ma ọ bụ chekwaa ya na desktọpụ ma ọ bụ ikpe okporo ụzọ site na iji J-Cl.amp.
• Kedu ọkwa ntinye kachasị nke LX-3?
  LX-3 nwere ike ijikwa +20dBu na-etinyeghị aka na mpe mpe akwa, yana nnukwu +32dBu nwere mpe mpe akwa.
• Enwere m ike iji LX-3 kewaa otu mgbaama iji nye ọtụtụ ndị na-ekwu okwu ike?
  Ee, ị nwere ike. Nke a na-enye gị ohere izipu mmepụta mono site na bọọdụ agwakọta gaa na okwu abụọ ma ọ bụ atọ, maka example.
• Enwere m ike iji LX-3 kewaa mmepụta nke guitar ma ọ bụ ahụigodo m?
  Ee, n'agbanyeghị na StageBug SB-6™ nwere ike ịbụ nhọrọ ka mma ebe ọ nwere njikọ ¼ ".

Nkọwapụta

Nkọwapụta nwere ike ịgbanwe na-enweghị ọkwa

GOCKWUO DIAGRAM

Nkọwapụta nwere ike ịgbanwe na-enweghị ọkwa

INJI NKE RADIAL NDỊ MMADỤ NDỊ MMADỤ AFỌ 3

Ụlọ ọrụ RADIAL ENGINEERING LTD. ("Radial") na-ekwe ka ngwaahịa a nweere onwe ya pụọ ​​​​na ntụpọ n'ihe na arụ ọrụ, ọ ga-edozikwa ntụpọ ọ bụla n'efu dịka usoro nke akwụkwọ ikike a siri dị. Radial ga-arụkwa ma ọ bụ dochie (na nhọrọ ya) akụrụngwa ọ bụla nwere ntụpọ nke ngwaahịa a (ewezuga imecha na iyi na dọkasịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsịsị)) maka afọ atọ (3) site na ụbọchị azụrụ mbụ. Ọ bụrụ na otu ngwaahịa adịkwaghị, Radial nwere ikike iji ngwaahịa yiri ya nke oke nha ma ọ bụ karịa dochie ngwaahịa ahụ. Ọ bụrụ na ekpughere ntụpọ, biko kpọọ 604-942-1001 ma ọ bụ email service@radialeng.com iji nweta nọmba RA (nọmba nlọghachite ikike) tupu oge akwụkwọ ikike afọ 3 agwụ. A ga-eweghachite ngwaahịa a akwụgoro ugwo n'ime akpa mbupu (ma ọ bụ ihe dakọtara) na Radial ma ọ bụ gaa na ebe nrụpụta Radial enyere ikike ma ị ga-echerịrị ihe ọghọm nke mfu ma ọ bụ mmebi. Mpempe akwụkwọ akwụkwọ ọnụahịa mbụ na-egosi ụbọchị azụrụ na aha onye na-ere ahịa ga-esorịrị arịrịọ ọ bụla maka ọrụ a ga-arụ n'okpuru akwụkwọ ikike a nwere oke na nke enwere ike ibufe. Akwụkwọ ikike a agaghị emetụta ma ọ bụrụ na emebiela ngwaahịa a n'ihi mmejọ, iji ya eme ihe, itinye ya n'ọrụ, ihe mberede ma ọ bụ n'ihi ọrụ ma ọ bụ mgbanwe site n'aka onye ọ bụla na-abụghị ebe nrụpụta Radial nyere ikike.

Ọ BỤGHỊ KWESỊRỊ KWESỊRỊ KARỊRỊ ndị dị n'ihu ebe a na kọwapụtara n'elu. Enweghị akwụkwọ ikike ma ọ bụ gosipụta ma ọ bụ gosipụta ya, gụnyere ịbụ naanị ndị enyemaka ọ bụla nke ngwa ahịa ma ọ bụ ahụike ga-agbatị karịa oge a kọwara n'elu afọ atọ. RADIAL agaghị abụ ọrụ ma ọ bụ kwụọ ụgwọ maka mmerụ ahụ ọ bụla pụrụ iche, nke metụtara eze ma ọ bụ ihe ga-esi na ya pụta ma ọ bụ mfu sitere na iji ngwaahịa a. Akwụkwọ ikike a na-enye gị ikike gbasara iwu, ma ị nwekwara ike ịnwe ikike ndị ọzọ, nke nwere ike ịdị iche dabere na ebe ị bi na ebe azụrụ ngwaahịa ahụ.

Iji mezuo ihe achọrọ nke California Proposition 65, ọ bụ ọrụ anyị ịgwa gị ihe ndị a:

Ịdọ aka ná ntịNgwaahịa a nwere kemịkalụ mara steeti California na-ebute ọrịa kansa, ntụpọ ọmụmụ ma ọ bụ mmerụ ahụ ọmụmụ ọzọ.

Biko lezie anya nke ọma mgbe ị na-emezi ma gakwuru ụkpụrụ gọọmentị ime obodo tupu ị tụfuo ya.

Ụlọ ọrụ Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada Tel: 604-942-1001 Fax: 604-942-1010 Email: info@radialeng.com

Ntuziaka onye ọrụ Radial LX-3™ – Nkebi #: R870 1029 00 / 08-2021. Nwebiisinka 2017, ikike niile echekwabara. Ọdịdị na nkọwapụta ga-agbanwe n'enweghị ọkwa.

Akwụkwọ / akụrụngwa

Igwe ọkụ Radial LX-3 Line Splitter [pdf] Ntuziaka onye ọrụ LX-3 Line Splitter, LX-3, Line Splitter, Splitter

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ