Akwụkwọ ntuziaka ntuziaka PPI UniLog Pro Temperature Data Logger

UniLog Pro / UniLog Pro Plus nwere CIM
Ụdị ngwanrọ PC nke na-edekọ data usoro zuru ụwa ọnụ

ọdịnaya zoo

UniLog Pro Ọnọdụ data Logger

Akwụkwọ ntuziaka ọrụ
Akwụkwọ ntuziaka a dị nkenke bụ maka nrụtụ aka ngwa ngwa gbasara njikọ wiring na ịchọ paramita. Maka nkọwa ndị ọzọ gbasara ọrụ na ngwa; biko banye na www.ppiindia.net

Onye ọrụ PARAMETERS
Oke	Ntọala (Uru ndabara)
'Malite' Iwu maka Ndekọ ogbe (Ọ dị ma ọ bụrụ na ahọpụtara Batch Recording)	Mba Ee
Obere mmalite>> Mba
Iwu 'Kwụsị' maka Ndekọ Batch (Ọ dị ma ọ bụrụ na ahọpụtara Batch Recording)	Mba Ee
Batch Kwụsị>> Mba

Nhazi nlekota oru

Mara: AII Parameter ndị ọzọ nọ n'okpuru Nhazi Nhazi

Ịtọlite mkpu
Oke	Ntọala (Uru ndabara)
Aha ọwa maka ntọala mkpu Họrọ chanel>> Ọwa-1	Akọwapụtara onye ọrụ ma ọ bụ aha ndabara maka ọwa-1 ruo ọwa-8/16 (Ndabere: NA)
Họrọ Mkpu Họrọ Mkpu>> AL1	AL1, AL2, AL3, AL4 (Nhọrọ dị adị na-adabere na ọnụọgụ Mkpu edobere n'otu ọwa Ibe nhazi mkpu)
Typedị Oti mkpu AL1 Ụdị >> Ọ dịghị	Ọ dịghị usoro ọ bụla dị ala dị elu (nke ndabara: Ọ dịghị)
Oti mkpu AL1 SETPOINT>> 0	Min. ka Max. nke ụdị ntinye ahọpụtara (Ndabere: 0)
Mkpu Hysteresis AL1 HYSTERESIS>> 2	1 ruo 3000 or 0.1 ruo 3000.0 (Ndabere: 2 or 2.0)
Mgbochi mkpu AL1 egbochi >> Ee	Mba Ee (Ebube: Mba)

Nhazi ngwaọrụ
Oke	Ntọala (Uru ndabara)
Oge mmelite ọwa na ọnọdụ nyocha akpaaka Nyochaa ọnụego>> 3	1 Sk. ruo 99 sk. (Ebube: 3 sec.)
Ngwaọrụ Nọmba njirimara NJ ndekọ>> 2	1 ruo 127 (Ebube: 1)
Họrọ Ngụkọta ọnụọgụ ọwa Mkpokọta chanel>> 16	8 16 (Ebube: 16)
Hichapụ ihe niile echekwara Ndekọ Hichapụ ndekọ>> Mba	Mba Ee (Ebube: Mba)

NKWUKWU CHANNEL
Oke	Ntọala (Uru ndabara)
Họrọ Aha Channel Họrọ chanel>> Ọwa-1	Akọwapụtara onye ọrụ ma ọ bụ aha ndabara maka ọwa-1 ruo ọwa – 8/16 (Ndabere: NA)
Mafee ọwa maka ngosi MAKA >> Mba	Mba Ee (Ebube: Ee)
Ụdị ntinye mgbaàmà Ụdị ntinye>> Ụdị K (Cr-Al)	Tụtụ aka Tebụl 2 (Ndabara: Ụdị K (Cr-Al)
Ngosipụta mkpebi maka Atụtara PV Mkpebi>> 0.1 nkeji	1 nkeji 0.1 nkeji 0.01 nkeji * 0.001 Nkeji * (Ndabere: 0.1 nkeji) (* maka 4-20mA)
Ngosipụta nkeji maka PV tụrụ atụ UNITS>>°C	Tụtụ aka Tebụl 1 (Ndabere: Celsius C)
Oke dị ala (maka 4-20mA) Obere ala>> 0	-19999 ruo 30000 na-agụta ya na mkpebi ahọpụtara (ndabere: 0.0)
Oke oke (maka 4-20mA) oke elu >> 1000	-19999 ruo 30000 na-agụta ya na mkpebi ahọpụtara (ndabere: 100.0)
Tinye obere clip na PV egosiri (maka 4-20mA) Mbelata >> Gbanyụọ	Gbanyụọ gbanye (Ndabere: gbanyụọ)
Tụgharịa ọkwa obere clip (maka 4-20mA) CLIP VAL >> 0.0	-19999 ruo 30000 (Ebube: 0)
Tinye obere ihe nkiri na PV egosiri (maka 4-20mA) HIGH CLIPPING>> Gbanyụọ	Gbanyụọ gbanye (Ndabere: gbanyụọ)
Tụgharịa Ọkwa Clip Elu (maka 4-20mA) HIGH CLIP VAL>> 100.0	-19999 ruo 30000 (Ebube: 100.0)
Efu Efu ZERO OFFSET>> 0	-1999/3000 or -1999.9/3000.0 (Ebube: 0)

Nhazi Mkpu
Oke	Ntọala (Uru ndabara)
Mkpu kwa ọwa Mkpu / CHAN >> 4	1 ruo 4 (Ebube: 4)
Ntugharị-1 mgbagha RELAY-1 LOGIC >> Nkịtị	Ntụgharị nkịtị (nke ndabara: Nkịtị)
Ntugharị-2 mgbagha RELAY-2 LOGIC >> Nkịtị	Ntụgharị nkịtị (nke ndabara: Nkịtị)

Nhazi ndekọ
Oke	Ntọala (Uru ndabara)
Nkịtị Ogologo oge ndekọ OKWU OKWU >> 0:00:30	0:00:00 (H:MM:SS) ruo 2:30:00 (H:MM:SS) (Ebube: 0:00:30)
Mbugharị ndekọ Ogologo oge MAKA NTỤTA >> 0:00:01	0:00:00 (H:MM:SS) ruo 2:30:00 (H:MM:SS) (Ebube: 0:00:01)
Ọgbọ ndekọ na ntụgharị ọnọdụ mkpu Mkpu TOGGLE REC>> Gbanyụọ	Gbanyụọ gbanye (Ndabere: Kwado)
Họrọ Ụdị ndekọ Ụdị ndekọ>> Na-aga n'ihu	Ogbe na-aga n'ihu (Ndabere: Na-aga n'ihu)
Ogologo oge maka ndekọ ogbe (maka naanị batch mode) OGE OGE>> 1.00	0:01 (HH:MM) ruo 250:00 (HHH:MM) (Ndabere: 1:00)

Ntọala RTC
Oke	Ntọala
Tọọ oge elekere (HH:MM) OGE (HH:MM)>> 15:53	0.0 ruo 23:59
Tọọ ụbọchị kalenda Ụbọchị >> 23	1 ruo 31
Tọọ ọnwa Kalinda Ọnwa >> 11	1 ruo 12
Tọọ Afọ Kalenda Afọ>> 2011	2000 ruo 2099

akụrụngwa
Oke	Ntọala
Nna-ukwu mkpọchi Kwado gbanyụọ Mkpọchi >> Enweghị mkpọghe >> Mba	Mba Ee
UIM ndabara UIM DEFAULT>> Mba	Mba Ee
CIM ndabara CIM DEFAULT>> Mba	Mba Ee
Mee ka CIM na UIM kwekọọ CPY CIM TO UIM>> Enweghị CPY UIM TO CIM>> Mba	Mba Ee

TABLE- 1
Nhọrọ	Nkọwa
Celsius C	Ogo centigrade
°F	Ọkwa Fahrenheit
(o nweghị)	Enweghị nkeji (oghe)
°K	Degree Kelvin
EU	Ngalaba Injinia
%	Pụgharịatage
Pa	Pascals
Mpa	Mpascals
kPa	Kpascals
mmanya	Ogwe
mba	Milli mmanya
psi	PSI
n'arọ/sq.cm	n'arọ / cm²
mmH2O	mm mmiri nlele
na H2O	Inches mmiri nlele
mmHg	mm mercury
Torr	Torr
lita / h	Lita kwa elekere
lita/min	Lita kwa nkeji
%RH	% Ikwu iru mmiri
%O2	% ikuku oxygen
% CO2	% Carbon di-oxide
%CP	% Enwere ike carbon
V	Volta
A	Amps
mA	Milli Amps
mV	Milli volts
ohm	Ohm
ppm	Akụkụ kwa nde
rpm	Mgbanwe kwa nkeji
mSec	Milli sekọnd
Nkeji	Sekọnd
min	Nkeji
elekere	Oge awa
PH	PH
% PH	% PH
kilomita / h	Maịl kwa elekere
mg	Milli grams
g	Grams
kg	Kilo grams

TABLE- 2
Nhọrọ	Oke (Nkeji ruo Max.)	Mkpebi
	0 ruo +960°C / +32 ruo +1760°F	Edobere 1°C/1°F


	0 ruo +1771°C / +32.0 ruo +3219°F
	0 ruo +1768°C / +32 ruo +3214°F


	Edobere ya maka ụdị Thermocouple akọwapụtara nke ndị ahịa adịghị n'elu.
	-199 ruo +600°C / -328 ruo +1112°F –199.9 na or ruo 1112.0°F 600.0°C / -328.0	Ntọala onye ọrụ 1°C/1°F ma ọ bụ 0.1°C / 0.1°F
	19999 ruo +30000 nkeji	Ntọala onye ọrụ 1 / 0.1 / 0.01/ 0.001 mkpụrụ

Ịtọ ntọala ID karịa 1 CIM
Ọdabara naanị maka UNILOG PRO PLUS

N'ihu ogwe osisi LAYOUT

Akara	Igodo	Ọrụ
	IHE	Pịa ka ịbanye ma ọ bụ pụọ na ọnọdụ nhazi.
	N'ala	Pịa ka ibelata uru oke. Ịpị otu ugboro na-ebelata uru site na otu ọnụ; ijide n'aka na-eme ka mgbanwe ahụ dịkwuo elu.
	UP	Pịa ka iwelie uru oke. Ịpị otu ugboro na-abawanye uru site na otu ọnụ; ijide n'aka na-eme ka mgbanwe ahụ dịkwuo elu.
	Banye	Pịa ka ịchekwaa uru paramita atọrọ wee pịgharịa gaa na oke na-esote na PAGE.