OFITE 172-00-C Roller oven nwere oge mmemme yana akwụkwọ ntuziaka ntuziaka ndị fan na-ekesa.

The Roller Oven can be used in various heating modes such as a
Drying Oven, Aging Oven, or Baking Oven. Ensure the desired
temperature is set using the programmable timer for the required
ogologo oge.

Ụdị mpịakọta naanị:

Utilize the Roller Oven as a Ball Mill Roller to create
homogenous mixtures of liquids or powders, agitate chemicals into
solutions, or de-aerate liquids. Adjust the rolling speed as needed
maka ngwa a kapịrị ọnụ.

Combined Heating and Rolling Functionality:

For applications requiring both heating and rolling functions
simultaneously, set the desired parameters for temperature and
rolling speed to achieve the desired results efficiently.

FAQ

Q: What safety features does the Roller Oven have?

A: The Roller Oven is equipped with a Redundant
Heat Control feature that ensures safety by shutting down the
heaters in case of over-heating. This prevents potential hazards
due to excessive temperatures.

Q: How many aging cells does the Roller Oven accommodate?

A: The Roller Oven can accommodate 6 units of
260 mL Aging Cells, 3 units of 500 mL Aging Cells, and 3 units of
1000 mL Aging Cells.

View Fullscreen

Roller Oven With Programmable Timer and Circulating Fan, 4 Roller
172-00-C (115 Volt) 172-00-1-C (230 Volt)
Akwụkwọ ntuziaka emelitere 8/21/2024 Ver. 5
OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. · Houston, Texas · 77065 · USA Tele: 832.320.7300 · Fax: 713.880.9886 · www.ofite.com
©Nwebiisinka OFITE 2015

Tebulu ọdịnaya

Introduction…………………………………………………………………………. 2 Specifications ………………………………………………………………………3 Components ………………………………………………………………………..4 Safety ………………………………………………………………………………….. 6
Roller Ovens …………………………………………………………………….6 Aging Cells……………………………………………………………………….6 Quick Start …………………………………………………………………………..7 Setup…………………………………………………………………………………… 9 Operation…………………………………………………………………………… 10 Timer …………………………………………………………………………………. 12 Maintenance ………………………………………………………………………. 15 Appendix …………………………………………………………………………… 18 Temperature Units……………………………………………………………18 Warranty and Return Policy ………………………………………………..19

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Okwu mmalite

OFITE Roller Oven (US Patent No. 4,677,843) bụ ihe enyemaka dị irè n'ịchọpụta mmetụta nke okpomọkụ na nrụgide na-egwupụta mmiri mmiri ka ọ na-ekesa site na olulu mmiri. Ịka nká mmiri mmiri na-egwupụta ihe n'ime arịa ndị a na-agbanye n'ọkụ na-egosipụta nke ọma mmetụta thermal na mmiri mmiri na-egwupụta ihe na-eme ka mmeghachi omume mgbanwe na-eme ma na-achọpụta nkwụsi ike nke ihe mgbakwunye apịtị na mmiri emulsified dị ka apịtị mmanụ. A na-eme ịka nká n'okpuru ọnọdụ dị iche iche site na static ruo ike na site na gburugburu ruo na okpomọkụ dị elu.
Many mud constituents degrade slowly at high temperatures. Such degradation occurs while circulating, but it is more severe when the mud is left in the lower part of the hole when making a trip. When running laboratory tests, aging temperatures are often selected to be near the anticipated circulating or bottom-hole temperatures and pressures, and aging cells are typically rolled in an oven for at least 16 hours. Routine laboratory analysis using roller ovens would include:
a. Simulate chemical reactions taking place in freshly prepared muds. b. Determine the time it takes reactions to reach equilibrium under tem-
perature and pressure. c. Determine the Viscosity of the fluid prior to aging and after. d. Determine filtration control properties prior to aging and after. e. Determine the stability of drilling fluid additives and drilling fluids such
as oil muds. f. Perform corrosion analysis.
Igwe ọkụ nke 4-rola nwere ike ijide mkpụrụ ndụ ịka nká 260-mL ma ọ bụ atọ 500-mL Aging Cells, ebe oven 5-rola nwere ike ijide mkpụrụ ndụ ịka nká 260-mL iri na abụọ ma ọ bụ asatọ 500-mL Aging Cell. Ha abụọ dị mma maka iji ụlọ nyocha. OFITE rollers bụ nke igwe anaghị agba nchara na-ejikwa ọsọ-ọsọ ma wuo ya maka ogologo ndụ yana ebe dị ọcha n'ime oven. Igwe ihe mkpuchi Teflon® nke nwere iko na-agbatị ndụ nke rollers ma nye ohere maka ọrụ na-enweghị mmezi ogologo oge.
All models feature a digital temperature controller that can be read directly from outside the oven. The temperature is controlled by an electronic solidstate thermostat and operates between 100°F and 500°F (38°C – 260°C). The 4 and 5-roller ovens include a seven-day programmable timer as standard equipment. The timer may be preset to automatically start and stop the heaters, allowing unattended operation. A circulating fan is included on all models which greatly improves air circulation within the oven providing more stable, consistent, and reliable uniform heating.
A na-enweta njikwa ọkụ na-ekpo ọkụ na-ekpo ọkụ na ụdị ahọpụtara ma bụrụ ihe nchekwa maka ndị na-ekpo ọkụ na ihe omume otu ma ọ bụ karịa okpomọkụ. A ga-emechi ike nke ndị na-ekpo ọkụ ma ọ bụrụ na ọkụ oven karịrị oke okpomọkụ a setịpụrụ. Usoro ịka nká n'ihi ogologo oge achọrọ maka ịmecha ule ahụ, a na-adịkarịghị elele ya, ya mere ọdịda ọkụ ọkụ nwere ike ịdị njọ.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Nkọwapụta

Emebere OFITE Roller Ovens iji nye ọrụ kpo oku na ntụgharị n'otu oge ma ọ bụ n'onwe ya. Ya mere, enwere ike itinye ha n'ọtụtụ ihe eji eme ihe, dịka ọmụmaatụ:
1. Heating Mode Only: – Drying Oven – Aging Oven – Baking Oven
2. Rolling Mode Only: – Ball Mill Roller – To make homogenous mixtures of liquids – To make homogenous mixtures of powders – To agitate chemicals into solutions – To de-aerate liquids

Igwe ọkụ OFITE niile dabara n'ụkpụrụ a tụrụ aro nke American Petroleum Institute (API) 13I. Igwe ọkụ ahụ nwere ike idowe okpomọkụ nke 150°F ± 5°F (65°C ± 3°C) dị ka akọwapụtara na RP 13I.

– Temperature Range: 100° – 500°F (38° – 260°C) – Digital Temperature Controller – 25-RPM Motor
– Programmable Timer – Material:
– Cabinet: 303 Stainless Steel – Rollers: 304 Stainless Steel

– 350-Watt Heater, Qty: 2

– Capacity:

– 260 mL Aging Cells: 6

– 500 mL Aging Cells: 3

– 1000 mL Aging Cells: 3

- Nha:

26.75 × × 22 ″ × 26 ″ (70 × 55.9 × 66 cm)

- Arọ:

141 lb. (64 n'arọ)

– Crated Size: 35″ × 29″ × 36″ (89 × 84 × 91 cm)

– Crated Weight: 239 lb. (108.4 kg)

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Ngwa

All Ovens: #165-14-8 Type “J” Thermocouple, ” × 6″ #165-14-10 Fuse, 1 Amp, Qty: 5 #165-45 Neon Lamp, Red #165-45-1 Neon Lamp, Clear #170-05 Thermostat, 50° – 500°F (10° – 260°C) #172-01 Fuse, ½ Amp, for Temperature Controller, Box of 5 #172-02-2 Chain, 12.5″, Qty: 2 #172-02-6 Chain, 40″ #172-03 Sprocket, ½” Bore, Qty: 7 #172-04 Connecting Link for Chain, Qty: 3 #172-08 Bearing for Roller Shafts, Qty: 8 #172-09 Fuse, 10 Amp, Box of 5 #172-11-1 Temperature Controller #172-13 Fuse, Light Holder #172-14 On/Off Toggle Switch #172-15-1 Omron Programmable Timer #172-22 Heater, 350 Watt, Qty: 2 #172-24 Solid State Relay, 240V-25A #172-25 Fan Motor #173-15 Knob, Oven Door, Black #174-07-1 5″ Fan Blade #174-13 Motor #174-14 Motor Controller
115-Volt Ovens (172-00-C): #171-82 Power Cord, 8 Feet #172-07 Fuse, 5 Amp, Igbe nke 5
230-Volt Ovens (172-00-1-C): #130-74 Transformer, 230/115 Volt, 50/60 Hz #165-40-2 Power Cable, 6 Feet #172-05 Fuse, 2 Amp, Igbe nke 5

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Nhọrọ:
175-25 Aging Cell, 303 Stainless Steel, with Valve, 260 mL 175-30 Aging Cell, 303 Stainless Steel, with Valve, 500 mL 175-50 Aging Cell, 316 Stainless Steel, with Valve, 500 mL 175-80 Aging Cell, 316 Stainless Steel, with Valve, 1,000 mL

#172-00-SP akụkụ mapụtara maka #172-00-C, oven 4-Roller nwere onye fan okirikiri, 115 volts

Nkọwa Nọmba Nkebi

Ọnụọgụ

#165-45

Neon Lamp, Uhie

#165-45-1 Neon Lamp, Kwuonụ

#172-01

Fuse maka njikwa okpomọkụ, ½ Amp

#172-03

Sprocket

#172-04

Njikọ njikọ maka Chain

#172-06

Ọkara Njikọ maka Chain

#172-07

Fuse, 5-Amp

#172-08

Njikere, maka Roller Shafts, Teflon® etinyere Glass

#172-09

Fuse, 10-Amp

#172-13

Ihe njide ọkụ Fuse

#172-22

Igwe ọkụ, 350-Watt

Ebu n'obi were ndepụta akụkụ mapụtara ka eji mee ihe maka ịzụrụ ihe n'ọdịnihu. Ihe onye ọ bụla chọrọ ga-eri ga-adị iche, na ngbanwe ọnụọgụ achọrọ ga-adabere na ọnụọgụ ule a na-eme kwa ụbọchị na/ma ọ bụ kwa izu.

# 172-00-1-SP akụkụ mapụtara maka #172-00-1-C, oven 4-Roller nwere fan okirikiri, 230 volts

Nkọwa Nọmba Nkebi

Ọnụọgụ

#165-45

Neon Lamp, Uhie

#165-45-1 Neon Lamp, Kwuonụ

#172-01

Fuse maka njikwa okpomọkụ, ½ Amp

#172-03

Sprocket

#172-04

Njikọ njikọ maka Chain

#172-05

Fuse, 2 Amp

#172-06

Ọkara Njikọ maka Chain

#172-08

Njikere, maka Roller Shafts, Teflon® etinyere Glass

#172-09

Fuse, 10-Amp

#172-13

Ihe njide ọkụ Fuse

#172-22

Igwe ọkụ, 350-Watt

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Nchekwa
Igwe igwe rola
Nchekwa
Mkpụrụ ndụ ịka nká

Yiri gloves na-eguzogide okpomọkụ na ihe nchebe ndị ọzọ dabara adaba mgbe ọ bụla na-arụ ọrụ na oven ọkụ na-ekpo ọkụ na cell Aging.
a. Installing Aging Cells inside a hot oven. b. Removing Aging Cells from a hot oven.
Na-eyi nchebe anya mgbe niile mgbe ị na-arụ ọrụ Roller Ovens. Kpachara anya ka ị ghara imeghe oven na-ekpo ọkụ na ihu gị kpọmkwem n'ihu ọnụ ụzọ mepere emepe.
N'oge a na-arụ ọrụ, mpụga nke Roller oven nwere ike ịdị ọkụ nke ukwuu, ọkachasị mpaghara ọnụ ụzọ, ma nwee ike ibute ọkụ ma ọ bụrụ na ndị ọrụ na-akpachapụghị anya metụ ya aka.
Onye ofufe na-ekesa n'ime oven nwere ike ịdị ize ndụ ma ọ bụrụ na ịtinye ma ọ bụ wepụ mkpụrụ ndụ ịka nká mgbe agụba na-atụgharị. Iji gbochie mmerụ ahụ na-atụgharị "Okpomọkụ" mgbe niile na Ogwe njikwa " Gbanyụọ" mgbe ị na-ebu ma ọ bụ na-ebutu sel.
OFITE na-ebufe oven niile nke nwere mkpuchi azụ ka ọ ghara ijide uwe n'agbụ na-atụgharị na sprocket. Ihe mkpuchi a kwesịrị ịdị na-adị mgbe niile ma e wezụga mgbe ị na-arụ ọrụ na agbụ ma ọ bụ sprockets. Maka oven ebe mkpuchi azụ na-efu ma ọ bụ na-ezighị ezi, mgbe ahụ, azụ nke oven kwesịrị ihu na mgbidi.
Kwupu eriri ike niile mgbe ị na-arụzi ma ọ bụ dochie fiusi.
Kpachara anya mgbe ị na-arụ ọrụ gburugburu oghere n'ọnụ ụzọ, karịsịa mkpịsị aka na eriri. Enwere ike ijide mkpịsị aka na eriri nke na-ebute mmerụ ahụ na-egbu mgbu.
Nkuku oven nwere ike imerụ ahụ ma ọ bụrụ na emetụta ya ozugbo. Kpachara anya nke ọma mgbe ị na-arụ ọrụ n'akụkụ ụlọ igwe anaghị agba nchara n'elu ebe nkuku dị nkọ nwere ike ịkpata mbelata n'oge nhicha.
Ekwesịrị iji oven mgbe niile na sekit ala.
Gbaa mbọ hụ na isi iyi eletrik nwere opekata mpe 8 Amps nke ikike.
Selịka ịka nká nwere ike ịdị ize ndụ ma ọ bụrụ na ejiri ya nke ọma. Okpomọkụ dị elu na nrụgide dị n'ime cell nwere ike ime ka ewepụta ọdịnaya ya na ike mgbawa.
Kwe ka cell dị jụụ mgbe niile ka ọ dị jụụ tupu imeghe.
Na-atụpụ cell mgbe niile pụọ na ndị mmadụ na akụrụngwa mgbe ị na-ada mbà site na imeghe valvụ.
Ejula ọnụ cell. Rụtụ aka na ntuziaka ntuziaka maka Cell Aging #17525, #175-30, #175-50 iji chọpụta oke mmiri kwesịrị ekwesị maka ọnọdụ ule.
Lelee n'ime cell ịka nká maka nrụgide ma ọ bụ corrosion olulu. Mkpụrụ ndụ na-arụ ọrụ na ọkwa pH dị elu ma ọ bụ dị ala ma ọ bụ na ngwọta saline na-etinye uche (Chlorides) ga-akwalite corrosion.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Mmalite ngwa ngwa

1. Plug in to appropriate electrical outlet.
2. Flip the “Heat” switch on the control panel ON. The red light pulsates when temperature is reached. This also turns on the circulating fan.
3. Flip the “Motor” switch on the control panel ON. The white light comes on and the rollers begin turning.
Programmable Timer To set the correct local time:
1. Turn the “Heat” switch on the control panel to the ON position.
2. Set the “Out 1 switch – On-Auto-Off” to the AUTO (middle) position.
3. Set the “P1, P2, Run” button to P1 to activate programming mode for Output 1.
4. Open the panel door and press and hold the “TIME ADJ” button until a blinking clock appears.
5. Press the “h” and “min” buttons to set the correct local time.
6. Press “WRITE” when finished.
7. Set the “P1, P2, Run” button to P1 to show the time. To program the timer:
1. Turn the “Heat” switch on the control panel to the ON position.
2. Set the “OUT1″ switch – On-Auto-Off” to AUTO setting. Leave the “OUT2” switch off.
3. Set the switch to the right of the display to P1 to activate programming mode for Output 1.
4. Select the day of the week for each the ON/off operation, marked by the removal of a dash above the day of the week button.
5. Press the “h” and “min” buttons to set the correct time for the “ON” or beginning cycle to begin. The “UP” arrow will blink.
6. Press “Write” to activate the Turn Off time (The Down Arrow Blinks).
7. Select the day of the week for each the on/OFF operation, marked by the removal of a dash above the day of the week button.
8. Press the “h” and “min” buttons to set the correct time for the “OFF” cycle to end. The “DOWN” arrow will blink.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

9. Press “WRITE” when finished.
10. Set the switch (“P1, P2, Run”) to the right of the display to “RUN”. The bar (-) will display the day(s) of operation.
To clear all programmed settings: Open the bottom panel and insert a pointed object into the “RESET” hole. Then press and hold the “+1h / CLEAR” button for 3 seconds.
Temperature Controller 1. Upper Temperature is the current temperature.
2. Lower Temperature is the temperature set point.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Melite

1. Flip both switches on the control panel (“Motor” and “Heat”) to the “Off” position (down).
2. Connect the power cord to the proper voltage isi iyi. Ọ bụrụ na achọrọ nkwụnye ma ọ bụ nkwụnye ọkụ ọzọ, rịba ama na waya akwụkwọ ndụ akwụkwọ ndụ bụ ala na waya ọcha na ojii bụ ndị na-eduga ike.
3. When the power cord is connected, the timer will be activated. It is recommended that the power be left connected even when tests are not being conducted so the timer will continue to keep time.
Ngụ oge

Ogwe njikwa

Njikwa okpomọkụ

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Ọrụ

1. Make sure the oven is connected to a power supply. Refer to page 12 for instructions on operating the timer. To run a test without a timer pro gram, set the “OUT1” switch to “ON” on the timer.
2. To turn on the rollers flip the “Motor” power switch to the “On” position. The white indicator light will come on and the rollers will start turning.
3. To turn on the heaters, flip the “Heat” power switch to the “On” position on the Control Panel. The heaters and the red indicator light will come on. The red indicator light will pulsate on and off as the temperature controller maintains the desired heat. The indicator light will pulsate on and off as the temperature controller maintains the desired heat.
Onye ofufe na-ekesa ga-agbanye ozugbo mgbe mgba ọkụ "Okpomọkụ" dị. Oghere fan nwere ike ịdị ize ndụ mgbe ikuku na-agbanye. Iji gbochie mmerụ ahụ, gbanyụọ "Okpomọkụ" mgbe ọ bụla mgbe ị na-ebu ma na-ebutu sel.
4. The upper register on the temperature controller will display the current temperature, while the lower register will show the current setpoint. Use the up and down arrow to adjust the temperature setpoint.
Okpomọkụ ga-ebili na ihe dịka 150°F (65.5°C) kwa elekere.
5. The oven can be preheated while the sampA na-anwale ma kwado les. A na-atụ aro ka ndị sampA ga-etinye les na OFITE Aging Cells maka ule oven. Agbanyeghị, enwere ike ijikwa mkpụrụ ndụ maka Igwe ọkụ dị elu, nrụgide dị elu (HTHP).
Rụtụ aka na ntuziaka ntuziaka Cell Aging iji chọpụta oke mmiri kwesịrị ekwesị maka ọnọdụ ule gị. Mmiri ga-agbasa ka okpomọkụ na-abawanye, ya mere a ga-ahapụrịrị ohere mgbasawanye.
Ọ bụrụ na a ga-atụgharị mkpụrụ ndụ ịka nká n'oge ule, tinye o-mgbanaka na mpụta mpụta n'elu na ala nke sel. Emeghị nke a nwere ike imebi rollers na oven. Teflon (#175-46) na Buna N (#175-54) o-mgbanaka dị. Maka ule n'elu 300°F (148.9°C), jiri Viton o-rings.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Fuse for Motor 5 Amp 115 Volt 2 Amp 230 Volt

Fuse for Heater 10 Amp
115 / 230 volts

Fuse for Temp. Controller 1/2 Amp 115 / 230 volts

Rollers Indicator Lamp – Ọcha

Ihe ngosi ọkụ Lamp – Uhie

Mgbanwe moto

Mgbanwe ọkụ

Ogwe njikwa

Ọ bụrụ na n'ihi ihe ụfọdụ onye na-ahụ maka okpomọkụ na-ada, thermostat ga-ebelata ike na okpomọkụ na 500°F (260°C), nke bụ okpomọkụ kacha ekwe omume.
Kpachara anya na ijikwa mkpụrụ ndụ ịka nká na-ekpo ọkụ. Emeghela mkpụrụ ndụ mgbe ọ na-ekpo ọkụ ma ọ bụ na nrụgide. Gbanyụọ nrụgide nke ọma ma hụ na a na-atụ aka na valvụ ahụ mgbe niile n'ebe ndị mmadụ ma ọ bụ akụrụngwa nọ. Yiri ngwa nchekwa onwe gị mgbe niile.
6. Leave the “Heat” switch on the control panel ON until the oven and sample ajụla oyi ruo njikwa okpomọkụ. Onye na-ahụ maka okpomọkụ ga-egosi okpomọkụ oven ma ọ bụrụhaala na ngbanwe "Okpomọkụ" dị. Maka oyi ọsọ ọsọ, mepee ụzọ.
7. After the test is complete, turn the “Heat” and “Motor” switches off.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Ngụ oge

Panel Door Folds Down
Enwere ike ịhazi oge iji gbanye ma gbanyụọ ọkụ n'ime izu. Usoro ngbanwu/ gbanyụọ ọrụ ọ bụla chọrọ ịtọ oge ON na oge gbanyụọ iche. N'oge mmemme, akara na-esonụ ga-apụta na ngosi.
When programming the ON time, the up arrow will blink. When programming the OFF time, the down arrow will blink. To Set to the Correct Time:
1. Turn the “Heat” switch on the control panel to the ON position. 2. Set the “Out 1 switch – On-Auto-Off” to the AUTO (middle) position 3. Set the “P1, P2, Run” button to P1 to activate programming mode for
Output 1. 4. Open the panel door and press and hold the “TIME ADJ” button until a
blinking clock appears. 5. Press the “h” and “min” buttons to set the correct local time. 6. Press “WRITE” when finished. 7. Set the “P1, P2, Run” button to P1 to show the time.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Mmemme:
1. Turn the “Heat” switch on the control panel to the ON position.
2. Set the “OUT1″ switch – On-Auto-Off” to AUTO setting. Leave the “OUT2” switch off.
3. Set the switch to the right of the display to P1 to activate programming mode for Output 1.
4. Select the day of the week for each the ON/off operation, marked by the removal of a dash above the day of the week button.
5. Press the “h” and “min” buttons to set the correct time for the “ON” or beginning cycle to begin. The “UP” arrow will blink.
6. Press “WRITE” to activate the turn off time (The down arrow blinks).
7. Select the day of the week for each the on/ OFF operation, marked by the removal of a dash above the day of the week button.
8. Press the “h” and “min” buttons to set the correct time for the “OFF” cycle to end. The “DOWN” arrow will blink.
9. Press “WRITE” when finished.
10. Set the switch (“P1, P2, Run”) to the right of the display to “RUN”. The bar (-) will display the day(s) of operation.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Iji kpochapụ ntọala niile akwadoro:
1. Mepee ogwe ala ma tinye ihe a kapịrị ọnụ n'ime oghere "RESET".
2. Wee pịa ma jide bọtịnụ "+1h / CLEAR" maka 3 sekọnd.
Mkpachapụ anya:
1. The Timer is not waterproof or oil resistant. Keep liquids away from the surface of the display.
2. Do not use organic solvents such as paint thinner or Benzene, strong Alkaline or strong acids as cleaners as they will damage the external finish.
3. None of the timer components are user-replaceable, including the battery which backs up the clock and setup functions.
4. Ntinye voltage nso: 100 ruo 240 VAC, 50/60 Hz. Enwere ike ibibi ihe dị n'ime ma ọ bụrụ na voltage n'èzí nso ka etinyere.
5. Only one of the two channels are utilized.
6. Season switching, cyclic operation, and non-operating day (Holiday) settings are non-functional as the timer may be programmed daily for such functions.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Nlekọta

1. Every 90 days, put a small amount of grease on the chain and sprockets.
2. Do not lubricate the Teflon® roller bearings.
3. Your OFITE Roller Oven has been preset at the factory to operate at either 115V (172-00 / 173-00) or 230V (172-00-1 / 173-00-1). However, this product is designed to be easily converted from 115V to 230V or from 230V to 115V. To accomplish this:
Kwụpụ unit na isi iyi ike tupu imepee casing unit.
a. Wepu akụkụ elu.
b. Remove the existing plug receptacle and replace it with the new one. For 115V, use part #165-47. For 230V, use part #164-30.
c. Chọta voltage ntụgharị ntụgharị na bọọdụ sekit (tụ aka na foto dị n'okpuru). Gbanwee mgba ọkụ abụọ a gaa na vol kwesịrị ekwesịtage (gbanwee ha abụọ n'aka nri maka 115V na n'aka ekpe maka 230V).
d. Tinyegharịa akụkụ elu elu.

Voltage Ntụgharị
Gbanwee

Igwe njikwa ọsọ
Voltage Conversion Switch

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

4. The oven motor speed is preset to 25 RPM. To change the speed:
a. Mepee casing unit dị ka akọwara n'elu wee tụgharịa igodo njikwa ọsọ (na elekere ka ọ na-abawanye, n'akụkụ elekere iji belata).
b. Kaa akara otu n'ime rollers. Tụtụ ihe tachometer ejiri aka na rola akara.
c. Tụgharịa igodo njikwa ọsọ ruo mgbe ruru ọsọ achọrọ.
5. OFITE Roller Ovens are fused to protect the driving motor, heaters, fan, and the controller. The light in the fuse holder will glow when the fuse burns out. The fuse holders are located above the motor and heat switches on the control panel.
a. Nke dị n'aka ekpe bụ maka moto (5 amps maka 115V ma ọ bụ 2 Amps maka 230 volt).
b. Nke dị n'aka nri bụ maka njikwa okpomọkụ (½ Amp).
c. Nke dị n'okpuru bụ maka ikpo ọkụ (10 Amps).
d. Igwe ikuku fan moto mgbasa ozi dị n'ime oven (1 Amp).
6. Most of the heat is lost around the door. The door insulation material should be soft and pliable. Over time it will become rigid and hard and will not insulate as well. If this happens, replace the insulation (#172-10).

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

7. Occasionally check the chains and sprockets in the back of the oven. The chain will stretch and the sprocket spokes may become worn down. This affects the operation of the oven requiring an occasional replacement of the chain and sprockets. Every three months, apply a small amount of grease to the chains and sprockets.
A ga-achọ iwepụ ihe mkpuchi dị n'azụ oven. Dochie ya mgbe niile ka emechara nrụzi dị mkpa.

Roller Oven Rear With Back Panel in Place

Chain Drive na Sprockets

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Ihe odide ntụkwasị
Nkeji okpomọkụ

Jiri usoro a ka ịgbanwee nkeji na njikwa okpomọkụ.
1. Press the page key until the display reads “ACCS / list”.
2. Press the scroll key once. The display should read “codE / 0”.
3. Press the up arrow to change the code to 1. After a few seconds, the display will read “codeE / PASS”.
4. Press the scroll key once. The display will read “Goto / OPEr”.
5. Press the down arrow once. The display will read “Goto / conF”.
6. Press the scroll key once. The display will read “ConF / 0”.
7. Press the up arrow twice. The display will read “ConF / 2”. After a few seconds, the display will read “ConF / PASS”.
8. Press the scroll key twice. The display will read “unit / oF”.
9. Press the up or down arrow to select units. Available options: °F, °C, °K, none.
10. Press the page and scroll keys at the same time. The display will read “EIit / no”.
11. Press the up arrow key once. The display will read “EIit / yes”. This will reboot the temperature controller. After the reboot, the display will show the new units.

Page Scroll

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Amụma akwụkwọ ikike na nloghachi

Akwụkwọ ikike:
Ngwa Nnwale OFI, Inc. (OFITE) na-enye ikike na ngwaahịa a ga-enwere onwe ya pụọ na njide na ntụpọ na aha, ma kwekọọ n'ihe niile gbasara usoro ịre ahịa na nkọwapụta dị na ngwaahịa ahụ. A ga-edobe ngwaahịa niile dabere na ụkpụrụ nrụpụta na ụkpụrụ OFITE. Ọ gwụla ma agbasaghị oge akwụkwọ ikike na ederede, akwụkwọ ikike a ga-etinye: ma ọ bụrụ na, n'oge ọ bụla tupu ọnwa iri na abụọ (12) site na ụbọchị akwụkwọ ọnụahịa, ngwaahịa ma ọ bụ akụkụ ya ọ bụla, adabaghị na akwụkwọ ikike ndị a ma ọ bụ nkọwapụta ndị dị na ya, na OFITE na-amara gị ọkwa na ederede mgbe achọpụtara ya, OFITE ga-arụzi ngwa ngwa ma ọ bụ dochie ngwaahịa ndị nwere nkwarụ. N'agbanyeghị nke a na-ekwu, ọrụ ikike ikike OFITE agaghị agbatị na ojiji ọ bụla onye zụrụ ngwaahịa ahụ n'ọnọdụ siri ike karịa ndụmọdụ OFITE, ma ọ bụ ntụpọ ọ bụla nke onye zụrụ ya na-ahụ anya mana nke anaghị ebute n'uche OFITE ozugbo.
Ọ bụrụ na onye zụrụ azụrụla ọrụ nrụnye na inye ọrụ na ngwaahịa ọdabara, akwụkwọ ikike dị n'elu ga-agbatịkwu ọnwa iri na abụọ (12) site na ụbọchị njedebe akwụkwọ ikike izizi maka ụdị ngwaahịa a.
Ọ bụrụ na a rịọrọ OFITE ka ọ wepụta nyocha na mmepe ahaziri maka onye zụrụ ya, OFITE ga-eji mbọ ya kacha mma mana ọ naghị ekwe onye zụrụ ahịa nkwa na a ga-enye ngwaahịa ọ bụla.
OFITE enweghị akwụkwọ ikike ma ọ bụ nkwa ọzọ nye onye zụrụ ya, ma ọ bụ nke egosipụtara ma ọ bụ n'ezoghị ọnụ, na akwụkwọ ikike enyere na nkebi a ga-abụ naanị nke akwụkwọ ikike ọ bụla gụnyere akwụkwọ ikike ọ bụla metụtara ma ọ bụ nke iwu kwadoro maka ebumnuche, ngwa ahịa, na usoro ọgwụgwọ ndị ọzọ nke iwu. .
Akwụkwọ ikike a nwere oke anaghị ekpuchi mfu ma ọ bụ mmebi ọ bụla na-eme n'ihi:
· Nrụnye na-ezighi ezi ma ọ bụ ndozi nke ngwaahịa
· Ejighị ya eme ihe
· Nleghara anya
· Ndozi site na isi mmalite na-enyeghị ikike
Ebe na-ekwesịghị ekwesị
Oke ọkụ ma ọ bụ ezughị oke ma ọ bụ ntụ oyi ma ọ bụ ọdịda ọkụ eletrik, ọwa, ma ọ bụ mmebi iwu ndị ọzọ.
Akụrụngwa, ngwaahịa ma ọ bụ ihe anaghị arụ ọrụ nke OFITE
· Firmware ma ọ bụ ngwaike nke onye ọzọ megharịrị ma ọ bụ gbanwee
Akụkụ ndị a na-eri eri (bearing, ngwa, wdg)
Nlaghachi na Ndozi:
A ga-ejizi nke ọma chịkọta ihe ndị a na-eweghachi iji gbochie mmebi na mbupu yana mkpuchi megide mmebi ma ọ bụ mfu enwere ike. OFITE agaghị enwe ọrụ maka akụrụngwa mebiri emebi n'ihi nkwakọ ngwaahịa ezughi oke.
Ihe ọ bụla na-enweghị ntụpọ eweghachiri na OFITE n'ime ụbọchị iri itoolu (90) nke akwụkwọ ọnụahịa bụ n'okpuru ụgwọ mweghachi 15%. OFITE ga-anatarịrị ihe eweghachitere n'ọnọdụ izizi maka ịnara ya. Agaghị anabata reagents na ihe pụrụ iche maka nloghachi ma ọ bụ nkwụghachi.
OFITE na-ewe ndị ọrụ nwere ahụmahụ n'ọrụ na-arụ ọrụ na ịrụzi akụrụngwa nke anyị rụpụtara, yana ụlọ ọrụ ndị ọzọ. Iji nyere aka mee ka usoro nrụzi dị ngwa ngwa, biko tinye akwụkwọ nrụzi yana ngwa niile ezigara OFITE maka nrụzi. Jide n'aka na ị gụnyere aha gị, aha ụlọ ọrụ, nọmba ekwentị, adreesị ozi-e, nkọwa zuru ezu nke ọrụ a ga-arụ, nọmba ịzụrụ ihe, na adreesị mbupu maka iweghachi ngwa ahụ. Nrụzi niile emere dị ka “nrụzi ka achọrọ” dabere na akwụkwọ ikike nwere oke ụbọchị iri itoolu (90). Niile “Ndozi akwụkwọ ikike” dị n'okpuru akwụkwọ ikike nwere oke ọnwa iri na abụọ (12).
Nlaghachi na nrụkwa akwụkwọ ikike nwere ike chọrọ nọmba Ikikere Ihe Nlaghachi (RMA). Ụdị RMA dị n'aka ahịa ma ọ bụ onye nnọchi anya ọrụ gị.
Biko bupu akụrụngwa niile (jiri akara RMA maka nloghachi ma ọ bụ nrụzi akwụkwọ ikike) na adreesị a:
Ngwa Nleba OFI, Inc. Attn: Ngalaba Ndozi 11302 Steeplecrest Dr. Houston, TX 77065 USA
OFITE na-enyekwa nkwekọrịta ọrụ asọmpi maka ịrụzi na/ma ọ bụ idokwa akụrụngwa ụlọ nyocha gị, gụnyere akụrụngwa sitere na ndị nrụpụta ndị ọzọ. Maka ozi ndị ọzọ gbasara nkwado teknụzụ na ọrụ ndozi anyị, biko kpọtụrụ techservice@ofite.com.

OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com

Akwụkwọ / akụrụngwa

	OFITE 172-00-C Roller Oven With Programmable Timer and Circulating Fan [pdf] Akwụkwọ ntuziaka 172-00-C, 172-00-1-C, 172-00-C Roller Oven With Programmable Timer and Circulating Fan, 172-00-C, Roller Oven With Programmable Timer and Circulating Fan, Programmable Timer and Circulating Fan, Timer and Circulating Fan, Circulating Fan
	OfiTE 172-00-C Roller oven [pdf] Akwụkwọ ntuziaka 172-00-C, 172-00-1-C, 172-00-C Roller oven, Roller oven, oven

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

OFITE 172-00-C Roller oven nwere oge mmemme yana akwụkwọ ntuziaka ntuziaka ndị fan na-ekesa.

172-00-C Roller oven nwere oge mmemme na onye na-ekesa

Nkọwapụta

Ntuziaka ojiji ngwaahịa

Ụdị ikpo ọkụ naanị:

Ụdị mpịakọta naanị:

Combined Heating and Rolling Functionality:

FAQ

Q: What safety features does the Roller Oven have?

Q: How many aging cells does the Roller Oven accommodate?

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi