Akwụkwọ ntuziaka onye ọrụ Moonwind mk II Analog Filter Tracker

Aha ngwaahịa: Moonwind mk II
Ụdị: Analog Filter Tracker
Ọkwa ntinye: Site na akara gita na-adịghị ike ruo ọkwa ahịrị studio dị elu nke +20dBu

Ogo Ọkwa mmepụta: Enwere ike idozi site na - ruo ihe dịka max. +20 dBu
Ogologo oge mbelata: 16Hz-ca. 35kHz
Oke resonance: 0 ruo kacha maka ike oscillation onwe

Ntuziaka ojiji ngwaahịa

Otu ọnọdụ

Mgbe agbanwuru ya, Moonwind MK II nọ na Single mode na isi menu (ọnọdụ edit ngwa ngwa).

Ihe nzacha na ihe nrụpụta na-arụ ọrụ dị ka ụlọ akụ nzacha ma enwere ike dezie ya ozugbo site na iji mkpịsị rotary.
A na-anụ mgbanwe ọ bụla emere ozugbo ma enwere ike ịchekwa ya ozugbo.

Njikwa agafelaview

Nweta: Gbanwee uru ntinye iji gbochie Peak LED ịgbanwuo ọkụ.
Akọrọ/mmiri: Jikwaa ngwakọta n'etiti mgbama ozugbo na ọnụọgụ mmetụta.

IHE: Gbanwee ọkwa mmepụta.
Kpuchie & Ajụjụ: Jikwaa ugboro mbelata ma yochaa warara n'otu n'otu.
RES: Gbanwee nzacha nzacha maka ike ọscilation nke onwe.

Ọrụ MIDI

MIDI na: Na-anata data MIDI
MIDI apụọ: Na-ebufe data MIDI na ngwaọrụ MIDI ọzọ nwere ike.
MIDI Site: Na-agafe data MIDI gaa na ngwaọrụ MIDI ọzọ nwere ike na-enweghị mgbanwe.

Na-edezi Sequencer

Pịa bọtịnụ SINGLE/SEQ ka ịgbanwee n'etiti otu ọnọdụ na usoro usoro.
Jiri ihe ngbanwe anọ na-adịghị agwụ agwụ iji mezie ụkpụrụ dị iche iche dabara na ọnọdụ ahọpụtara.

Ajụjụ A na-ajụkarị (FAQ)

Q: Gịnị bụ nzube nke Encoder 1-4 na Moonwind mk II?

A: A na-eji ihe ngbanwe ndị a na-edozi paramita dị iche iche dabara na ọnọdụ ahọpụtara, dị ka ntọala nzacha ma ọ bụ paramita FX na ọnọdụ ndezi ngwa ngwa.

Ajụjụ: Kedu ka m ga-esi gbanwee n'etiti Single na usoro usoro na Moonwind MK II?

A: Pịa bọtịnụ SINGLE/SEQ ka ịgbanwee n'etiti ụdịdị abụọ a.

Otu atọrọ atọ

Mgbe agbanwuru, Moonwind MK II abanyela
Otu ọnọdụ na na isi menu ntụgharị
ọnọdụ ndezi ngwa ngwa.
Ihe nzacha na ihe nrụpụta mmetụta na-arụ ọrụ ugbu a dị ka ụlọ akụ nzacha ma enwere ike dezie ya ozugbo site na mkpịrịka rotary.
A na-anụ mgbanwe ọ bụla ozugbo ma enwere ike ịchekwa ya ozugbo.

ONYE NA-AKWỤKWỌ/ỤRỤ

Bọtịnụ a na-agbanwe n'etiti otu ọnọdụ na usoro usoro. Na otu ọnọdụ, Moonwind MK II na-arụ ọrụ dị ka ụlọ akụ nzacha kwụ ọtọ.

BEPỤ

Mpempe akwụkwọ a na-achịkwa nbibi (nkuku) ugboro ole nzacha. Dị ka nhazi ọdịdị nke nzacha, ị na-agbanwe ihe ndị bụ isi nke nzacha na mmetụta ụda ya.

Ogologo ya na-esi na 16Hz-ca. 35kHz ma na-ekpuchi oke ọdịyo niile.
The Moon Wind MK II nwere ihe nzacha abụọ yiri ya. Ya mere ọ bụ naanị otu akụkụ ka akọwara n'ụzọ zuru ezu ebe a n'ihi na atọ, na triangle haziri knobs Cutoff, Q, na Res nwere otu ọrụ na nzacha ọ bụla.

Encoder

Ihe ngbanwe 1-4

N'aka ekpe nke ihe ngosi OLED, ihe ngbanwe anọ na-adịghị agwụ agwụ nwere ike ịhazigharị ụkpụrụ dị iche iche dabara na ọnọdụ ahọpụtara.
A ga-agbanwe parampat anọ na ibe menu ọ bụla. Mkpọtụ rotary ndị a na-abawanye na-arụ ọrụ mgbe niile n'ihe metụtara oke ahọpụtara ma na-abawanye site na mmegharị gawa n'aka elekere ma na-ebelata site na ntụgharị ihu elekere.

N'ụdị ndezi ngwa ngwa, ndị na-etinye koodu na-edezi paramita 4 FX ozugbo.

Mkpọtụ

Pịa bọtịnụ NOISE wee mepee menu:
Ị nwere ike ikpebi ebe a ma ọ bụrụ na-eri nri na-acha ọcha ma ọ bụ dara ụda n'ime ọnwa ifufe MK II nyo ma ọ bụ. Maka ụfọdụ ngwa ụda nnwale, nke a nwere ike ịba uru nke ukwuu.

The Moon Wind MK II pụtara ịbụ onye na-emepụta ụda zuru oke.
Mkpọtụ = 001 na-emepụta mkpọtụ ọcha. N'elu nke ahụ ụkpụrụ mkpọtụ ụda ọla bụ atụmatụ ọnụọgụ abụọ sitere na uru mkpọtụ.

Ọ dịghị nke bụ otu, ma ị nwere nnukwu ụdị mkpọtụ ụda ọla dị iche iche ị ga-enyocha. Ụfọdụ na-adị ntakịrị ụda, ụfọdụ na-agba ọsọ ma na-eme mkpọtụ. Ọnụ ọgụgụ dị elu karịa, otú ahụ ka mgbaàmà mkpọtụ ugboro ugboro nwere ike ịdị mgbagwoju anya.

Olu Noise

Mkpọtụ agwakọta na isi mgbama mgbaama nwere ike ịchịkwa olu ebe a.

Midi

Midi In

Jack a na-arụ ọrụ iji jikwaa Moonwind MK II site na ngwaọrụ Midi ọzọ nwere ike, dịka usoro nro ma ọ bụ ngwaike, igbe njikwa, Jomox Alpha Base, ma ọ bụ ihe yiri ya.
Moonwind mk II na-ahazi iwu ndetu midi. A na-akpalite ma envelopu FIL na VCA. Ihe ndetu na-achịkwa mbelata nke nzacha abụọ ahụ. A na-agbakọ nọmba ndetu n'ụzọ nke na a na-ezute ihe nzacha na-eme onwe ya ihe fọrọ nke nta ka ọ bụrụ semitones egwu - agbanyeghị, ụdị nzacha anaghị adị kpọmkwem ka VCO nke synth. Ọkpụkpọ ahụ dịgasị iche na ọnụọgụ Q na resonance yana scaling logarithmic ezughị oke. Onye na-atụ anya ebe a synthesizer na ngbanwe zuru oke ga-emechu ihu - nke a bụ ụlọ akụ nzacha analog ọ bụghị synth.

Ọpụpụ Midi

Na-eje ozi iji bufee data Midi site na ikuku ọnwa mk II gaa na ngwaọrụ Midi ọzọ nwere ike, dịka usoro dị nro ma ọ bụ ngwaike, iji gbanwee data.

Midi Thru

Na-eje ozi iji gafere data Midi site na Moonwind MK II gaa na ngwaọrụ Midi ọzọ nwere ike. Ozi Midi na-abata na-ebufe site na ngwaike gaa na ọdụ ụgbọ mmiri Midi Thru na-enweghị mgbanwe ọ bụla.

Na-edezi Sequencer

Pịa bọtịnụ SINGLE/SEQ. Ọ bụrụ na Moonwind MK II nọ na ihuenyo ndezi ngwa ngwa nke otu ọnọdụ tupu mgbe ahụ, ihe ngosi ahụ na-agbanye na ọnọdụ usoro ugbu a.

Ihuenyo ọsọ ọsọ nke otu atọrọ ka dị na ngosipụta:

Ogwe nke dị elu dị iche iche na-anọchi anya ụkpụrụ maka mbelata (ma ọ bụ oke ọzọ) nke a na-akpọ azụ na steepụ nke usoro ahụ.
E wezụga mbepụ, onye na-eme ihe nwere ike ịdekọ ma kpọọghachi Q yana resonance.

Malite

Na-amalite usoro. N'agbanyeghị ọnọdụ Single/Seq, onye na-eso ya na-agba ọsọ ma gosipụta usoro a na-egwuri site na ọkụ nke Start LED. Ị ka nwere ike ibugharị mkpisi aka ma gbakwunye uru mbelata n'usoro.

KWỤSỊ

Kwụsị usoro.

Dekọọ

Na-arụ ọrụ ndekọ mmegharị nke Cutoff/Q/Res ozugbo ka usoro na-agba ọsọ.
Ị nwere ike ịhụ mgbanwe ndị edekọtara dị ka eserese mmanya naanị ma ọ bụrụ na ịnọ n'ụdị usoro. Site na UNDO/EXIT ị nwere ike megharịa ihe ruru 1000 usoro dezie.
Enwere ike ịgbalite ndekọ naanị ma ọ bụrụ na usoro na-egwu. Ikanam uhie na-esote bọtịnụ na-enwu.
Ịpị bọtịnụ ọzọ na-ahapụ ọnọdụ ndekọ ahụ.

Na-edezi usoro site na Touchpad

Gaa usoro Nzọụkwụ Dezie ọnọdụ site na ịpị STEP, ma ị nwere ike ibugharị cursor na touchpad ma gbanwee usoro ihe mgbochi site na iji mkpịsị aka gị na-arị elu / ala.
Ịtụgharị aka ugboro abụọ n'etiti usoro aka ekpe na akanri.

URU

Na-achịkwa uru ntinye. Moonwind MK II nwere ike hazie ihe fọrọ nke nta ka ọ bụrụ ọkwa ntinye ọ bụla, site na akara guitar na-adịghị ike ruo ọkwa ọkwa studio dị elu nke +20dBu.
Biko gbanwee uru ahụ ka Peak LED gbara agbata obi ghara ime ọkụ.

Akọrọ/mmiri

Na-achịkwa ngwakọta n'etiti mgbama ozugbo na ọnụọgụ mmetụta. Tụgharịa n'aka ekpe n'akụkụ aka ekpe, mgbama mmepụta hà nhata mgbama ntinye na-enweghị mmetụta (bypass), tụgharịrị n'akụkụ elekere zuru oke, ị ga-enweta mgbaama mmetụta dị ọcha.

Mpịakọta

Na-achịkwa ọkwa mmepụta. Ihe nrụpụta enweghị nha nha yana enwere ike ịhazi ya site na -∞ ruo ihe dịka max. +20 dBu.

Q (Q = àgwà) na-edozi warara nke nzacha. Ọnụ ahịa dị elu na-eduga na ngbanwe nzacha imi, nke pere mpe na nzacha ụda brọdband.
Na Resonance = 0, nzacha agaghị eme onwe ya mana kama ọ ga-adị warara nke ukwuu ma ọ bụrụ na Q kacha.

RES

Na-edozi resonance nke nzacha. Na-emegide ọtụtụ synth ndị ọzọ na-enyocha moonwind mk II nwere ntọala dị iche iche maka Q na Resonance.

Site na resonance, nzacha ahụ na-enwe ike ime onwe ya ma nwee ike imepụta oscillation sine kwụsiri ike n'oge nkwụsị. Iji mee ka nke a mee, Q ga-edokwarịrị elu karịa efu.

Mmetụta Mmetụta

Mgbe ị nọ na Single Mode, metụ aka ugboro abụọ na touchpad, n'oge na-adịghị anya "Mmetụta Metụ aka" ga-akpali na ngosi.
Ihuenyo ahụ tọgbọrọ chakoo na ntụpọ na-esote mkpịsị aka gị na ngosi. Na ọkara aka nri nke ihuenyo ahụ, ị na-achịkwa nkwụsị aka nri site na mmegharị aka ekpe na Q / Resonance site na mmegharị elu / ala.

Ọkara aka ekpe na-emetụta nzacha aka ekpe n'akụkụ nke ọzọ gbasara mbelata.
Nke ahụ na-eme ihe nzacha tweet na ịfụ ụfụ n'aka gị, ma ị nwere ike kpọọ nzacha ahụ n'ezoghị ọnụ.

Usoro ndekọ site na Touchpad

Ọ bụrụ na ịchọrọ ịdekọ, malite naanị usoro ihe omume, ozugbo ị metụrụ aka ahụ aka, ndekọ ahụ ga-amalite ozugbo. A na-edekọ mmegharị niile n'ime usoro. Fun!

LFO

Pịa LFO1 ma ọ bụ LFO2.
Na LFO (Obere Frequency Oscillator) ị nwere ike ịmepụta modulations na-adọrọ mmasị nke mbelata. Nzacha nwayo na-ada ada na-ekpochapụ ruo ụda vibrato ga-ekwe omume.
Ọnụ ọgụgụ buru ibu nke ụdị ebili mmiri 64 bụ nke gị.
Ọ bụrụ na nzacha ndị ahụ na-enwe mmetụta nke onwe, ị nwere ike ịmepụta ebili mmiri na-agbanwe agbanwe na LFO nke na-echeta nnukwu sistemu modular.

Ịtụgharị ọnụego n'elu 127 na-atụgharị mmekọrịta elekere Midi na LFO.

Ụdị mmekọrịta LFO

Envelopu FIL / VCA envelopu

Pịa ENV.
MkII moonwind enwetala nzacha yana envelopu VCA nke enwere ike ịkpalite site na mmemme ndetu midi. Ihe ndetu nke mbụ na-emepe envelopu ndị ahụ ma akwụkwọ ndetu ikpeazụ ewepụtara na-ewepụta envelopu ahụ na kọrọd egwu.
Yabụ ị nwere ike iji Moonwind mkII dị ka mkpọtụ mkpọtụ ma ọ bụ nkwalite synth wee gbakwunye nzacha analọgụ na synth gị ma ọ bụrụ na ị na-ebugharị ya site na MoonWind mkII wee tinye otu ndetu midi.

Ịpị ENV ọzọ na-atụgharị n'etiti envelopu FIL na VCA.

Ị nwere ike ịhazigharị parampat ADSR na-ahụkarị Attack, Decay, Sustain, and Release site na iji koodu 4. Eserese dị mfe na-agbaso ụkpụrụ.
Biko mara na ọ bụ naanị ihe ngosi bụ ahịrị ma ọ bụghị akara ngosi anụ ahụ nke na-agbanwe CV. Ọ bụ kpochapụwo exponential.

N'ihi ịdị mfe ọ na-adọta na ogologo ahịrị.

Mpempe akwụkwọ nzacha

Envelopu nzacha na-arụ ọrụ na nzacha abụọ ahụ, mana ọnụọgụ modulation nwere ike ịdị iche maka nzacha ọ bụla.

VCA envelopu

The VCA envelopu na-achịkwa usoro ụda olu nke VCA ikpeazụ (Voltage Ejikwa ya Amponye ọka iwu). Biko mara na nke a na-emekọrịta ihe na oke VCAm (ego VCA).

Ọ bụrụ na VCAm bụ efu, naanị envelopu nwere ike imeghe VCA na moonwind mkII na-agbachi nkịtị ma ọ bụrụ na enweghị ndetu midi etinyere.
Ọ bụrụ na emepere VCAm na 127, envelopu VCA enweghị mmetụta ọ bụla. Ụkpụrụ dị n'etiti ka mgbama gafeta ma gbakwunye ntakịrị ụda ụda VCA.
Ndabere-amamihe uru a meghere nke ọma n'ihi na moonwind mkII na-arụ ọrụ dị ka nzacha kwụ ọtọ na mbụ.

Udi L/ SHAPER

Bọtịnụ a na-agbanwe nhazi ụdị (ụdị) nke nzacha aka ekpe ma ọ bụ aka nri. Site na ịpị ya ọzọ, ụdị anọ dị iche iche na-agafe. E gosipụtara ha na OLED. Enwere ntọala anọ:

Lp (Nfefe dị ala)

Naanị obere ugboro ruo n'akụkụ nkuku ka a na-agafe. A na-ebipụ trebles.
Bọtịnụ a na-agbanwe nhazi ụdị (ụdị) nke nzacha aka ekpe ma ọ bụ aka nri. Site na ịpị ya ọzọ, ụdị anọ dị iche iche na-agafe. E gosipụtara ha na OLED. Enwere ntọala anọ:

Lp (Nfefe dị ala)

Naanị obere ugboro ruo n'akụkụ nkuku ka a na-agafe. A na-ebipụ trebles.

Hp (High Pass)

Naanị frequency dị elu gbadara ruo n'ikuku nkwụsị ga-agafe. A na-ebipụ obere frequencies.

Bp (Band Pass)

Naanị frequency dị n'ime eriri ngafe n'akụkụ oge nkwụsịtụ ga-agafe. A na-ebipụ frequencies dị elu na nke dị ala.

Nt (Notch)

Ugboro niile ma e wezụga eriri nkwụsị n'akụkụ ugboro nkwụsị. A na-ebipụ eriri gburugburu ebe a na-egbutu ya.

Nhọrọ atọrọ

Site n'ịtụgharị koodu DATA, ị nwere ike icheta ụda 256 akwadoro karịa - ọnụ ọgụgụ dị nta n'ime ha bụ ntọala ụlọ ọrụ.
Egosiri nọmba na aha na mpigharị.
Site na ịpị DATA knob, a na-ebuba ihe preset a họọrọ.

Ụzọ nke abụọ ịhọrọ atọrọ ntọala bụ site n'itinye elu ma ọ bụ gbadaa na bọtịnụ elu/ala.
Ugbu a, ị na-adịghị na doro anya na-ebunye preset, ọ na-ebu na-akpaghị aka.

Mmemme Mmetụta

Pịa ALG.
Ihe nrụpụta mmetụta nke SPIN semiconductor na-enye 7 mmemme ROM na-enweghị ike ịgbanwe yana 8 algọridim emelitere site na OS, nke na-eme ngụkọta mmemme mmetụta 15 yana mmemme nnwale na-enweghị ọrụ.

Enwere ike ịhọrọ ha n'otu n'otu.
Na ibe a, ị nwere ike họrọ mmemme mmetụta na DATA encoder ma ọ bụ bọtịnụ Up/down.
N'ihi na paramita Fx atọ dị nwere ihe dị iche maka mmemme Fx ọ bụla, nkọwa uru ha na-agbanwe n'otu n'otu maka algọridim ọ bụla.

Nzaghachi FX

Site na uru a, ị na-agbanwe nzaghachi FX. Ọ bụrụ na arụ ọrụ mmemme igbu oge, ị nwere ike ịmepụta ọmarịcha teepu igbu oge na ping-pong echoes, ebe ọ bụ na a na-enyeghachi ihe nzacha azụ azụ n'otu aka ahụ ma na-enyocha akara ahụ ntakịrị karịa na ọsọ ọ bụla.

Ị ga-anwale na mmemme FX ọ bụla iji nweta nsonaazụ achọrọ ebe ọ bụ na algọridim ọ bụla na-emekọrịta ihe dị iche iche na nzaghachi analog.
Nlebara anya: ọ bụrụ na FX Nzaghachi na cranked elu, ọ nwere ike na mberede na-ebute nzaghachi siri ike mgbe ahọpụtara ụfọdụ mmemme FX nke nwere ike ịda ụda mara mma!

Mmepụta CV

CV Ọpụpụ aka ekpe na aka nri nke CV dị n'ime cutoff. Ọ bụrụ na ịchọrọ iji usoro nbipu nke ime iji jikwaa ngwaọrụ mpụga (dịka ọmụmaatụ VCO ma ọ bụ nzacha ọzọ), jikọọ ya ebe a.

CV na-agbaso usoro nzacha ime niile gụnyere usoro, Envelopu FIL na LFO. Mpụta 0-5 Volts.

Kpebie L CV n'ime

CUT L = Mbelata aka ekpe
Na-agbakwụnye CV na nbibi dị n'ime nke nzacha aka ekpe. Ya mere ị nwere ike gbanwee modulations ma ọ bụrụ na ịchọrọ.
CV a dị n'èzí anaghị emetụta nhazi CV dị n'ime ma na-arụ ọrụ naanị na mmepụta nzacha ngwaike.

CUT L nwekwara ike iji CV adịghị mma, sitere na -5V ruo +5V.

CUT R CV n'ime

CUT R = Mbelata aka nri
Na-agbakwụnye CV na nbibi dị n'ime nke nzacha ziri ezi. Na-arụ ọrụ dị ka CUT L n'elu.

VCA CV IN

VCA = VCA ikpeazụ (Mpịakọtatage Ejikwa ya Amponye ndu)
Jack a nwere ọrụ ngbanwe: unplugged VCA na-emeghe n'ụzọ zuru ezu na n'okpuru akara nke Moonwind mkII OS, na ozugbo etinyere plọg na VCA na-esochi etinyere CV.

0 Volt CV = VCA mechiri ma ọ nweghị mgbaama na-apụta. 5 Volt CV = VCA meghere nke ọma wee gafee mgbama.

CV IN mmemme nwere ike ime

A haziri jakị ntinye CV isii na kọlụm abụọ.
Kọlụm L (aka ekpe) na-agbanwe parampat nzacha aka ekpe yana nke ọzọ maka kọlụm R (n'aka nri). E wezuga parampat metụtara nzacha, enwere ike ibugharị paramita karịa n'akụkụ abụọ ahụ.

Usoro ntinye ntinye CV

Ị ga-pịa SET L ma ọ bụ SET R iji hazie ihe omume.

Maka ntinye CV ọ bụla, ị nwere oke nke ọ na-aga na ego na-esi na 0..127. Ọ bụrụ na ego ahụ bụ> 0 ma tinye CV na jakị ahụ, mmanya na-apụta, yana ọnụọgụ nke jakị CV.
Ogo nke mmanya na-anọchi anya CV voltage mụbara site na ego ole, ya bụ, ngbanwe mgbanwe mgbanwe nke oke njedebe ebe aga.

Akwụkwọ / akụrụngwa

Moonwind mk II Analog Filter Tracker [pdf] Akwụkwọ ntuziaka onye ọrụ
mk II Analog Filter Tracker, mk II, Analog Filter Tracker, Filter Tracker, Tracker

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Moonwind mk II Analog Filter Tracker

Ozi ngwaahịa