microsonic mic Ultrasonic sensọ nwere mmepụta mgbanwe abụọ
mic Ultrasonic Sensors nwere mmepụta mgbanwe abụọ
Nkọwa ngwaahịa
Igwe okwu sensọ nwere nsonaazụ mgbanwe abụọ na-atụ anya ebe ihe dị n'ime mpaghara nchọpụta enweghị kọntaktị. Dabere n'ebe achọpụtara gbanwechara, a na-edobe nsonaazụ mgbanwe. Ọrụ mmepụta na-agbanwe site na NOC gaa na NCC.
Iji ihe nkwụnye LinkControl (ngwa ngwa) enwere ike gbanwee ntọala ihe mmetụta niile site na Windows® Software. Ndetu nchekwa Ԏ Gụọ akwụkwọ ntuziaka ọrụ tupu ịmalite. Enwere ike ịrụ ọrụ njikọ, nrụnye na nrụzi naanị site na ndị ọkachamara ọkachamara. Enweghị akụrụngwa nchekwa dịka ntuziaka igwe EU si dị, a anabataghị iji ya na mpaghara nchekwa nkeonwe na igwe anaghị anabata mic-sensors nwere mpaghara kpuru ìsì nke dị anya. nha agaghị ekwe omume. Oke arụ ọrụ na-egosi anya nke ihe mmetụta nke enwere ike itinye ya na ihe ngosi nkịtị nwere ọrụ nchekwa zuru oke. Mgbe ị na-eji ihe ngosi dị mma, dị ka mmiri dị jụụ, a pụkwara iji ihe mmetụta mee ihe ruo n'ókè kachasị elu. Ihe na-etinye ike (dịka ụfụfụ rọba) ma ọ bụ na-egosipụta ụda nke ọma (dịka ọmụmaatụ okwute okwute) nwekwara ike ibelata oke ọrụ akọwapụtara.
→ Nwụnye Îkọkọta ihe mmetụta na ebe nrụnye.
→ Tinye eriri njikọ na njikọ M12, lee foto 1.
 |
 |
agba |
| 1 | +UB | agba aja aja |
| 3 | –UB | acha anụnụ anụnụ |
| 4 | D2 | nwa |
| 2 | D1 | ọcha |
| 5 | Mmekọrịta/Com | agba ntụ |
.Dị nke 1: Pin ọrụ ya na view n'elu ihe mmetụta plọg na agba koodu nke microsonic cable njikọ
Malite
→ Jikọọ ọkụ.
→ Tọọ paramita nke ihe mmetụta site na iji LinkControl nkwụnye LCA-2 na LinkControl software.
Ntọala ụlọ ọrụ
- A na-ebunye mic-sensors ụlọ ọrụ ejiri ntọala ndị a rụọ:
- Na-agbanwe mmepụta na NOC
- Ịchọta anya n'ogo arụ ọrụ na ọkara oke arụ ọrụ ewepụtala oke nchọta na oke kacha
Mmekọrịta
Ọ bụrụ na anya mgbakọ egosiri na Fig.2 maka sensọ abụọ ma ọ bụ karịa gafere, ekwesịrị iji mmekọrịta agbakwunyere. Jikọọ ntụtụ 5 (mmekọrịta/Com) nke ihe mmetụta niile (oke 10).
 |
 |
|
|
igwe-25… |
<10 cm | <1.0 m |
| igwe-35… | <30 cm | <1.7 m |
| igwe-130… | <60 cm | <5.4 m |
| igwe-340… | <1.6 m | <16 m |
| igwe-600… | <2.6 m | <30 m |
Multiplex mode
Enwere ike kenye sensọ nke ejikọrọ eletrik na ibe ya site na pin 5 (Sync / Com) otu adreesị ngwaọrụ n'etiti "01" na "10" na njikwa njikọ. Ihe mmetụta sensọ na-eji nha ultrasonic ha na-agbanwe mgbe ha na-arụ ọrụ n'usoro nrịgo nke adreesị ngwaọrụ. Nke a na-ezere kpam kpam nnyonye anya n'etiti ihe mmetụta. Edere adreesị ngwaọrụ ahụ »00« maka ịrụ ọrụ mmekọrịta ma kwụsị ọrụ multiplex. Maka ịrụkọ ọrụ ọnụ, sensọ niile ga-enwerịrị adreesị ngwaọrụ »00«.
Nlekọta
mic-sensọ na-arụ ọrụ n'efu. Obere unyi dị n'elu anaghị emetụta ọrụ. Oke unyi na unyi kek na-emetụta ọrụ sensọ ya mere a ga-ewepụrịrị ya.
Rịba ama
sensọ igwe okwu nwere ụgwọ ime mmụọ. N'ihi ikpo ọkụ nke ihe mmetụta nke onwe, ụgwọ okpomọkụ na-erute ebe ọrụ ya kacha mma mgbe ihe ruru. Nkeji 30 nke ọrụ.
Data teknụzụ
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
| mpaghara kpuru ìsì | 0 ruo 30 mm | 0 ruo 65 mm | 0 ruo 200 mm | 0 ruo 350 mm | 0 ruo 600 mm |
| oke ọrụ | 250 mm | 350 mm | 1,300 mm | 3,400 mm | 6,000 mm |
| oke oke | 350 mm | hụ mpaghara nchọpụta | 2,000 mm | 5,000 mm | 8,000 mm |
| akụkụ nke osisi gbasaa | hụ mpaghara nchọpụta | 400 kHz | hụ mpaghara nchọpụta | hụ mpaghara nchọpụta | hụ mpaghara nchọpụta |
| ugboro transducer | 320 kHz | 0.18 mm | 200 kHz | 120 kHz | 80 kHz |
| mkpebi | 0.18 mm | ± 0.15% | 0.18 mm | 0.18 mm | 0.18 mm |
| reproducibility | ± 0.15% | Okpomọkụ na-efegharị n'ime akwụ ụgwọ, ≤2%, nwere ike | ± 0.15% | ± 0.15% | ± 0.15% |
| izi ezi | Okpomọkụ na-ebugharị n'ime akwụ ụgwọ, ≤2%, nwere ike gbanyụọ 1) (0.17%/K na-enweghị akwụ ụgwọ) | gbanyụọ 1) (0.17% / K na-enweghị akwụ ụgwọ) | Okpomọkụ na-efegharị n'ime akwụ ụgwọ, ≤2%, nwere ike gbanyụọ 1) (0.17% / K na-enweghị akwụ ụgwọ) |
Okpomọkụ na-efegharị n'ime akwụ ụgwọ, ≤2%, nwere ike gbanyụọ 1) (0.17% / K na-enweghị akwụ ụgwọ) |
Okpomọkụ na-efegharị n'ime akwụ ụgwọ, ≤2%, nwere ike gbanyụọ 1) (0.17% / K na-enweghị akwụ ụgwọ) |
| Mpaghara nchọpụta maka ihe dị iche iche: Mpaghara isi awọ gbara ọchịchịrị na-anọchi anya mpaghara ebe ọ dị mfe ịmata ihe ngosi nkịtị (ogwe okirikiri). Nke a na-egosi ụdị ọrụ sensọ a na-ahụkarị. Ebe ndị na-acha ntụ ntụ na-anọchi anya mpaghara ebe a ka na-amata nnukwu ihe ngosi - dịka ọmụmaatụ efere. Ihe a chọrọ ebe a bụ maka nhazi kacha mma na ihe mmetụta. Ọ gaghị ekwe omume ịtụle ntụgharị uche ultrasonic na mpụga mpaghara a. |  |
 |
 |
 |
 |
| arụ ọrụ voltagna UB | 9 ruo 30 V DC, ihe akaebe dị mkpụmkpụ, Klas 2 | 9 ruo 30 V DC, ihe akaebe dị mkpụmkpụ, Klas 2 | 9 ruo 30 V DC, ihe akaebe dị mkpụmkpụ, Klas 2 | 9 ruo 30 V DC, ihe akaebe dị mkpụmkpụ, Klas 2 | 9 ruo 30 V DC, ihe akaebe dị mkpụmkpụ, Klas 2 |
| voltage ripple | ± 10% | ± 10% | ± 10% | ± 10% | ± 10% |
| enweghị ibu ọkọnọ ugbu a | ≤55 mA | ≤55 mA | ≤55 mA | ≤55 mA | ≤55 mA |
| ụlọ | Ọla aka uwe, nickel-plated, plastic akụkụ: PBT | Ọla aka uwe, nickel-plated, plastic akụkụ: PBT; | Ọla aka uwe, nickel-plated, plastic akụkụ: PBT; | Ọla aka uwe, nickel-plated, plastic akụkụ: PBT; | Ọla aka uwe, nickel-plated, plastic akụkụ: PBT; |
| Ultrasonic transducer: polyurethane ụfụfụ, | Ultrasonic transducer: polyurethane ụfụfụ | Ultrasonic transducer: polyurethane ụfụfụ, | Ultrasonic transducer: polyurethane ụfụfụ, | Ultrasonic transducer: polyurethane ụfụfụ, | |
| epoxy resin nwere iko ọdịnaya | epoxy resin nwere iko ọdịnaya | epoxy resin nwere iko ọdịnaya | epoxy resin nwere iko ọdịnaya | epoxy resin nwere iko ọdịnaya | |
| EN 60529 klas nchekwa | 9 IP 67 | IP67 | IP67 | IP67 | IP67 |
| ụkpụrụ nkwekọ | EN 60947-5-2 | EN 60947-5-2 | EN 60947-5-2 | EN 60947-5-2 | EN 60947-5-2 |
| ụdị njikọ | Nkwụnye ihe mmalite 5-pin, Brass, nickel plated | Nkwụnye ihe mmalite 5-pin, Brass, nickel plated | Nkwụnye ihe mmalite 5-pin, Brass, nickel plated | Nkwụnye ihe mmalite 5-pin, Brass, nickel plated | Nkwụnye ihe mmalite 5-pin, Brass, nickel plated |
| mmemme | site na LinkControl | site na LinkControl | site na LinkControl | site na LinkContro | site na LinkControl |
| okpomọkụ na-arụ ọrụ | –25 ruo + 70 Celsius | l site na LinkControl site na LinkControl site na LinkControl na-arụ ọrụ okpomọkụ -25 ka +70 °C -25 ka +70 °C | –25 ruo + 70 Celsius | –25 ruo + 70 Celsius | –25 ruo + 70 Celsius |
| nchekwa okpomọkụ | –40 ruo + 85 Celsius | –40 ruo + 85 Celsius | –40 ruo + 85 Celsius | –40 ruo + 85 Celsius | –40 ruo + 85 Celsius |
| ibu | 200 g | 200 g | 200 g | 260 g | 320 g |
| ịgbanwe hysteresis 1) | 3 mm | 5 mm | 20 mm | 50 mm | 100 mm |
| ugboro ngbanwe 1) | 11 Hz | 8 Hz | 6 Hz | 3 Hz | 2 Hz |
| oge nzaghachi 1) | 50 ms | 70 ms | 110 ms | 180 ms | 240 ms |
| oge igbu oge tupu nnweta 1) | igwe okwu-35/DD/M | igwe okwu-130/DD/M | igwe okwu-340/DD/M | igwe okwu-600/DD/M | |
| ịtụ Mba. | igwe okwu-25/DD/M | 2x pnp, UB – 2 V, Imax = 2x 200 mA | 2x pnp, UB – 2 V, Imax = 2x 200 mA | 2x pnp, UB – 2 V, Imax = 2x 200 mA | 2x pnp, UB – 2 V, Imax = 2x 200 mA |
| mmepụta mmepụta | t 2x pnp, UB – 2 V, Imax = 2x 200 mA | NOC/NCC nwere ike ịgbanwe, ihe akaebe dị mkpụmkpụ | NOC/NCC nwere ike ịgbanwe, ihe akaebe dị mkpụmkpụ | NOC/NCC nwere ike ịgbanwe, ihe akaebe dị mkpụmkpụ | NOC/NCC nwere ike ịgbanwe, ihe akaebe dị mkpụmkpụ |
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany /
T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Ọdịnaya nke akwụkwọ a bụ n'okpuru mgbanwe teknụzụ. E gosipụtara nkọwapụta dị na akwụkwọ a n'ụzọ nkọwa naanị. Ha anaghị enye ikike njirimara ngwaahịa ọ bụla.
losure Ụdị 1 Maka iji naanị na igwe mmepụta ihe NFPA 79 ngwa. A ga-eji mgba ọkụ nso nso a ga-eji eriri / njikọ njikọ akpọrọ mini-mum 7 Vdc, kacha nta 32 mA, na ntinye ikpeazụ.
Akwụkwọ / akụrụngwa
 |
microsonic mic Ultrasonic sensọ nwere mmepụta mgbanwe abụọ [pdf] Akwụkwọ ntuziaka mic-25-DD-M, mic-35-DD-M, mic-130-DD-M, mic-340-DD-M, mic-600-DD-M, mic Ultrasonic sensọ nwere mmepụta mgbanwe abụọ, igwe okwu Ultrasonic Ihe mmetụta, ihe mmetụta Ultrasonic, ihe mmetụta Ultrasonic nwere mpụta mgbanwe abụọ |
