EZIOKWU PWM-120 Series 120W Constant Voltage PWM Mmepụta LED Akwụkwọ ntuziaka onye ọrụ
EZIOKWU PWM-120 Series 120W Constant Voltagna PWM Output LED Driver

Atụmatụ 

  • Voltage PWM mmepụta mmepụta.
  • Ngwa ọkụ mberede dị ka IEC61347-2-13 si dị.
  • Ọrụ PFC na-arụ ọrụ na nhazi klas Il
  • Ọ dịghị ibu ike oriri <0.5W/ oriri ike njikere <0.5W(DA/DA2-ụdị)
  • Ejiri ọkwa IP67 kpuchie ya nke ọma
  • Nhọrọ ọrụ: 3 na 1 dimming (dim-to-off); DALI/DALI-2
  • Ọkwa mbelata kacha nta 0.2% maka ụdị DALI
  • Oge ndụ nkịtị> 50000 awa na akwụkwọ ikike afọ 5

Ngwa

  • Igwe ọkụ warara LED
  • Ọkụ ọkụ ime ụlọ
  • Ọkụ eji achọ mma LED
  • LED architecture ọkụ
  • Igwe ọkụ ụlọ ọrụ
  • Ụdị "HL" maka ojiji na klaasị |, nkewa 2 dị ize ndụ (nkewa) ọnọdụ.

Koodu GTIN 

Ọchụchọ MW: https://www.meanwell.com/serviceGTIN.aspx

ọdịnaya zoo
1 Nkọwa
2 Nkọwapụta
3 DIMMING ọrụ
4 ỌKWU Mpụta vs OMUME
5 Akwụkwọ / akụrụngwa
5.1 Ntụaka
6 Ozi ndị metụtara

Nkọwa

Usoro PWM-120 bụ onye ọkwọ ụgbọ ala 120W AC / DC na-egosipụta voltaji mgbe niiletage mode nwere mmepụta ụdị PWM,
nke na-enwe ike ịnọgide na-enwe okpomọkụ na agba na nchapụta homogeneity mgbe ị na-anya ụdị ọ bụla nke Ikanam ibe. PWM-120 na-arụ ọrụ site na 90 ~ 305VAC ma na-enye ụdị dị iche iche gosiri voltagnke dị n'etiti 12V na 48V. Ekele maka arụmọrụ dị elu ruo 90.5%, na-enweghị ihe ngosi, usoro ahụ dum nwere ike ịrụ ọrụ maka -40 ° C ~ + 90 Celsius C ọnọdụ okpomọkụ n'okpuru ikuku ikuku n'efu. A na-eji usoro nchebe IP67 dị elu mee ihe na usoro ahụ dum ma dị mma iji rụọ ọrụ maka nkụ, damp ma ọ bụ ebe mmiri. PWM-120 nwere ọrụ dimming nke na-agbanwe usoro ọrụ nke mmepụta, na-enye nnukwu mgbanwe maka ngwa ibe ọkụ LED.

Ihe ntinye ihe nlere 

Ihe ntinye ihe nlere

Ụdị Ọkwa IP Ọrụ Rịba ama
Oghere IP67 3 na 1 dimming ọrụ (0 ~ 10Vdc, 10V PWM mgbaàmà na nguzogide) Dị na ngwaahịa
DA IP67 Teknụzụ njikwa DALI. (maka ụdị 12V/24V DA naanị) Dị na ngwaahịa
DA2 IP67 Teknụzụ njikwa DALI-2. (maka 12V/24V nwere naanị ụdị DA2) Dị na ngwaahịa

Nkọwapụta

Ụdị PWM-120-12 PWM-120-24 PWM-120-36 PWM-120-48
    Mpụta DC VOLTAGE 12V 24V 36V 48V
EKWERE UGBUA 10A 5A 3.4A 2.5A
EGO IKE 120W 120W 122.4W 120W
ỤTỌ DIMMING 0 ~ 100%
Ugboro ugboro PWM (Ụdị) 1.47kHz maka oghere/DA-ụdị, 2.5kHz maka DA2-ụdị
NTKWU, NA-ebili oge Rịba ama. 2Rịba ama. 9 500ms, 80ms/230VAC ma ọ bụ 115VAC
Jidesie oge (Ụdị) 16ms / 230VAC ma ọ bụ 115VAC
Ntinye VOLTAGE nso Rịba ama.3 90 ~ 305VAC 127 ~ 431VDC(Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")
Ugboro ugboro RANGE 47 ~ 63Hz
IHE MGBE IKE (Ụdị) PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ zuru ibu(Biko rụtụ aka na ngalaba "Power FACTOR (PF) CharacTERISTIC" ngalaba)
Mkpokọta HARMIC NKWUKWU THD< 20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Biko rụtụ aka na ngalaba "NKWUKWU HARMONIC DISTORTION")
OKWU (Ụdị) 88.5% 90% 90% 90.5%
AC ugbu a (Ụdị) 1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
INRUSH Ugbu a (pdị.) Oyi malitere 60A (twidth=520μs tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
MAX. Mba. nke PSU na 16A CIRCUIT BREAKER Nkeji 4 (onye na-emebi okirikiri nke ụdị B) / nkeji 6 (onye na-emebi okirikiri nke ụdị C) na 230VAC
NKWUKWU UGBUA <0.25mA / 277VAC
Ọ BỤGHỊ IBU/NKWUKWU IKE Enweghị ike ibu <0.5w maka ụdị oghere; ike oriri <0.5W maka ụdị DA-ụdị/DA2
Nchedo bufee 108 ~ 130% gosiri ike mmepụta
Ọnọdụ mgbakasị ahụ, na-agbake na-akpaghị aka ka ewepụrụ ọnọdụ mmejọ
Obere oge Ọnọdụ hiccup 12V / 24V na ọnọdụ 36V / 48V mechie (gụnyere ụdị DA-ma e wezụga ụdị DA2) Ọnọdụ Hiccup, na-agbake na-akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ (naanị maka ụdị DA2)
 N'elu VOLTAGE 15 ~ 17V 28 ~ 34V 41 ~ 46V 54 ~ 60V
Mechie o/p voltage, re-ike na-agbake
GARA Okpomọkụ Mechie o/p voltage, re-ike na-agbake
Gburugburu Ebe Obibi ỌRỤ NA-arụ ọrụ. Tcase = -40 ~ +90 ℃ (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE")
MAX. IGBU OZI. Akpa =+90 ℃
Iru mmiri na-arụ ọrụ 20 ~ 95% RH na-abụghị condensing
Nchekwa TEMP., IHU URU -40 ~ +80 ℃, 10 ~ 95% RH
TEMP. EGO ± 0.03% / ℃ (0 ~ 45 ℃, ma e wezụga 0 ~ 40 ℃ maka 12V)
VIBRATION 10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Nchekwa & EMC  Ọkọlọtọ nchekwa Rịba ama. 5 UL8750 (ụdị "HL") (ma e wezụga maka ụdị 12DA), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1 61347 kwadoro; Nhazi na-ezo aka na BS EN/EN2-13; Dabere na BS EN/EN62384-67-15885 appendix J dabara adaba maka nrụnye mberede (EL)(AC ntinye: 120-12,24Vac)(maka DA004-ụdị naanị)
Ụkpụrụ DALI IEC62386-101, 102 maka DA/DA207,251-Ụdị naanị, Ngwaọrụ ụdị 2(DT6)
NA -ECHE VOLTAGE I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
Nguzogide dịpụrụ adịpụ I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISỌ Rịba ama. 6 Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load≧60%); BS EN/EN61000-3-3,GB17743 na GB17625.1,EAC TP TC 020
EMC MGBE nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TP TC 020
Ndị ọzọ MTBF 2243.7K elekere min. Telcordia SR-332 (Bellcore); 228.7K elekere min. MIL-HDBK-217F (25 ℃)
Akụkụ 191*63*37.5mm (L*W*H)
Mbukota 0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
IHE
  1.  A na-atụle parampat niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a yana 25 ℃ nke ọnọdụ okpomọkụ.
  2. Enwere ike ịchọrọ iwepụ ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba STATIC HARACTERISTIC maka nkọwa.
  3. A na-atụ ogologo oge nhazi na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro.
  4. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.
  5. Usoro a na-ezute ogologo ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc point (ma ọ bụ TMP, kwa DLC), bụ ihe dịka 75 ℃ ma ọ bụ obere.
  6. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com
  7. The ambient okpomọkụ derating nke 3.5 ℃ / 1000m na ​​fanless ụdị na nke 5℃ / 1000m na ​​fan ụdị maka arụ ọrụ elu karịa 2000m (6500ft).
  8. Maka ndetu ngwa ọ bụla yana ịkpachara anya nrụnye ọrụ akaebe mmiri IP, biko rụtụ aka n'akwụkwọ ntuziaka onye ọrụ tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf9. Dabere na IEC 62386-101 / 102 DALI ike na usoro oge na nkwụsịtụ, oge nhazi kwesịrị iji nwalee onye na-ahụ maka DALI nke nwere ike ịkwado ike DALI na ọrụ, ma ọ bụghị na oge nhazi ga-adị elu karịa 0.5 sekọnd maka. Ụdị DA.

※ Nkwụghachi ụgwọ ngwaahịa: Maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx

DIMMING ọrụ

DIMMING ọrụ

DIM+ maka oghere-Ụdị DA+ maka ụdị DA/DA2 * *DIM- maka oghere-ụdị DA- maka ụdị DA/DA2

Ụkpụrụ nbelata maka mmepụta ụdị PWM

A na-enweta ntu oyi site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.

DIMMING ọrụ

3 n'ime 1 arụrụ arụ ọrụ (maka oghere-ụdị)

  • Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM-: 0 ~ 10VDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide.
  • Na-ebelata isi iyi ugbu a site na ọkọnọ ike: 100μA (ụdị.)

DIMMING ọrụ
DIMMING ọrụ
DIMMING ọrụ

Rịba ama

  1. Min. okirikiri ọrụ nke mmepụta ugbu a bụ ihe dịka 0.15%, ntinye na-ebelata ihe dị ka 6KΩ ma ọ bụ 0.6VDC, ma ọ bụ 10V PWM mgbama nwere 6% ọrụ okirikiri.
  2. Usoro ọrụ nke mmepụta ihe ugbu a nwere ike ịdaba na 0% mgbe ntinye ntugharị na-erughị 6KΩ ma ọ bụ ihe na-erughị 0.6VDC, ma ọ bụ 10V PWM mgbama nwere usoro ọrụ na-erughị 6%.

DALI Interface (akụkụ isi; maka DA/DA2-ụdị)

  • Tinye akara ngosi DALI n'etiti DA+ na DA-.
  • DALI protocol nwere otu iri na isii na adreesị 16.
  • A na-edozi nzọụkwụ mbụ na 0.2% nke mmepụta

ỌKWU Mpụta vs OMUME

DIMMING ọrụ

AKWỤKWỌ AKWỤKWỌ

DIMMING ọrụ

MMADỤ IKE (PF).

DIMMING ọrụ

Achọrọ iwepụ ọkwa n'okpuru obere ntinye voltage.

Mkpokọta mgbasa ozi ọjọọ (THD)

DIMMING ọrụ

Ịrụ ọrụ vs ibu

Usoro PWM-120 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90.5% na ngwa ubi.

48V Model, Tcase na 80 ℃

DIMMING ọrụ

OGE NDỤ

DIMMING ọrụ

Ihe Ngosi

Ihe Ngosi

Nkọwapụta igwe

Ụdị oghere 

Nkọwapụta igwe

DA/DA2-Ụdị

Ngwaahịa Overawe

Na -akwado ntụnye ntụnye

Na -akwado ntụnye ntụnye

Akwụkwọ ntuziaka nwụnye

Njikọ maka ụdị oghere

Akwụkwọ ntuziaka nwụnye

Ịdọ aka ná ntị

  • Tupu ịmalite nrụnye ma ọ bụ ọrụ mmezi ọ bụla, biko kwụpụ ọkụ eletrik na akụrụngwa. Gbaa mbọ hụ na enweghị ike ijikọ ya ọzọ n'amaghị ama!
  • Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ.
  • Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ịbawanye okpomoku akụrụngwa nke dị n'ime ma ga-achọkwa de-rating na mmepụta ugbu a.
  • Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka na nkọwapụta ya.
  • Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ na-esi ike ka mmiri ghara ịbanye n'ime usoro ahụ.
  • N'ihi na dimmable LED ọkwọ ụgbọala, jide n'aka na gị dimming njikwa bụ ike ịkwọ ụgbọala ndị a nkeji.PWM usoro chọrọ 0.15mA ọ bụla unit.
  • Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke.
  • Ejikọla “DIM- na -V”.
  • Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị nkeji iri atọ.
  • A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta ngwá ọrụ ikpeazụ ga-emerịrị EMC
  • Ntuziaka na nrụnye zuru ezu ọzọ.

Akara

Akara

Akara ngosi nke ọma

Akwụkwọ / akụrụngwa

EZIOKWU PWM-120 Series 120W Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye ọrụ
PWM-120-12, PWM-120-24, PWM-120-36, PWM-120 Series, 120W Constant Vol.tage PWM Mmepụta LED Driver, PWM-120 Series 120W Constant Voltage PWM Mmepụta LED ọkwọ ụgbọ ala, Constant Voltage PWM Mmepụta LED ọkwọ ụgbọ ala, Voltage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver, Driver

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *