MMA nke ọma PWM-120 120W Constant Voltage PWM Mmepụta LED ntuziaka ntuziaka

Usoro PWM-120 bụ onye ọkwọ ụgbọ ala 120W AC / DC na-egosipụta voltaji mgbe niiletage mode nwere mmepụta ụdị PWM, nke na-enwe ike idobe okpomọkụ na agba na ịdị ncha mgbe ị na-anya ụdị ọ bụla.
Iberibe LED. PWM-120 na-arụ ọrụ site na 90 ~ 305VAC ma na-enye ụdị dị iche iche gosiri voltage sitere na 12V na 48V. N'ihi arụmọrụ dị elu ruo 90.5%, na-enweghị ihe ọ bụla, usoro ahụ dum nwere ike ịrụ ọrụ maka -40 °C ~ + 90 Celsius C ọnọdụ okpomọkụ n'okpuru ikuku ikuku n'efu. A na-eji usoro nchebe IP67 dị elu mee ihe na usoro ahụ dum ma dị mma iji rụọ ọrụ maka nkụ, damp ma ọ bụ ebe mmiri. PWM-120 nwere ọrụ dimming nke na-agbanwe usoro ọrụ nke mmepụta, na-enye nnukwu mgbanwe maka ngwa ibe ọkụ LED.

Ihe ntinye ihe nlere

Ụdị	Ọkwa IP	Ọrụ	Rịba ama
Oghere	IP67	3 na 1 dimming ọrụ (0 ~ 1 0Vdc, 1 0V PWM mgbaàmà na nguzogide)	Dị na ngwaahịa
DA	IP67	DALI akara technoloQy.(maka 12V/24V DA ụdị naanị)	Dị na ngwaahịa
DA2	IP67	teknụzụ njikwa DALL-2.(maka 12V/24V nwere naanị ụdị DA2)	Dị na ngwaahịa

Nkọwapụta

Ụdị		PWM-120-12 0		PWM-120-24	0	PWM-120-36	0	PWM-120-48 D
Mpụta	DC VOLTAGE	12V		24V		36V		48V
	EKWERE UGBUA	10A		5A		3.4A		2.5A
	EGO IKE	120W		120W		122.4W		120W
	ỤTỌ DIMMING	0 ~ 100%
	Ugboro ugboro PWM (Ụdị)	1.47kHz maka oghere/DA-ụdị, 2.5kHz maka DA2-ụdị
	NTKWU, NA-ebili oge t::	500ms, 80ms/230VAC ma ọ bụ 115VAC
	Jidesie oge (Ụdị)	16ms / 230VAC ma ọ bụ 115VAC
Ntinye	VOLTAGE RANGE Rịba ama.3	90 ~ 305VAC 127 ~ 431VDC (Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")
	Ugboro ugboro	47 ~ 63Hz
	IHE MGBE IKE (Ụdị)	PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ zuru ibu Biko rụtụ aka na ngalaba “POWER FACTOR (PF) CharacTERISTIC”
	Mkpokọta ndakpọ ndakpọ	THO< 20% (@Ioad 60%/115VAC, 230VAC; @load 75%/277VAC)
	OKWU (Ụdị)	88.5%		90%		90%		90.5%
	AC ugbu a (Ụdị)	1.3A/115VAC	0.65A / 230VAC		0.55A/277VAC
	INRUSH Ugbu a (pdị.)	Oyi malitere 60A (twidth=520µs tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
	MAX. Mba. nke PSU na 16A MGBE EGO	Nkeji 4 (onye na-emebi okirikiri nke ụdị B) / nkeji 6 (onye na-emebi okirikiri nke ụdị C) na 230VAC
	NKWUKWU UGBUA	<0.25mA/ 277VAC
	Enweghị ibu/njikere Iriri ike	Ọ dịghị ibu ike oriri <0.5w maka oghere-ụdị; njikere oriri <0 .5W maka DA-ụdị/DA2-ụdị
Nchedo	bufee	108 ~ 130% gosiri ike mmepụta
		Ọnọdụ mgbakasị ahụ, na-agbake na-akpaghị aka ka ewepụrụ ọnọdụ mmejọ
	Obere oge	Ọnọdụ hiccup 12V / 24V na ọnọdụ 36V / 48V mechie (gụnyere ụdị DA-ma e wezụga ụdị DA2), na-agbake na-akpaghị aka mgbe ewepụsịrị ọnọdụ mmejọ (naanị maka ụdị DA2)
	N'elu VOLTAGE	15 ~ 17V		28 ~ 34V		41 ~ 46V		54 ~ 60V
		Mechie o/p voltage, re-ike na-agbake
	GARA Okpomọkụ	Mechie o/p voltage , re-power na mgbake
Gburugburu Ebe Obibi	ỌRỤ NA-arụ ọrụ.	Tcase=-40 ~ +90°C (Biko rụtụ aka na ngalaba “OUTPUT LOAD vs temperature” ngalaba)
	MAX. IGBU OZI.	Tcase=+90°C
	Iru mmiri na-arụ ọrụ	20 ~ 95% RH na-abụghị condensing
	Okpomọkụ nchekwa., HUMIDIT'I	-40 ~ + 80 Celsius, 10 ~ 95% RH
	TEMP. EGO	±0.03%/°C (0 ~ 45°C, ewezuga 0 ~ 40°C maka 12V)
	VIBRATION	10 ~ 50GHz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Nchekwa & EMC	Ọkwa nchekwa ama.5	UL8750 (ụdị "HL") (ma e wezụga maka ụdị 12DA), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 .62384 kwadoro; Nhazi na-ezo aka na BS EN/EN67-15885; Dị ka BS EN/EN120-12-24 mgbakwunye J dabara maka nrụnye mberede
	Ụkpụrụ DALI	IEC62386-101, 102,207,251 maka DA/DA2-Ụdị naanị, Ngwaọrụ ụdị 6(DT6)
	NA -ECHE VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	Nguzogide dịpụrụ adịpụ	I/PO/P:1QOM Ohms/500VDC/25°C/70% RH
	EMC EMISSION Note.6	Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load 60%) ; BS EN/EN61000-3-3,GB17743 na GB17625 .1,EAC TP TC 020
	EMC MGBE	nnabata na BS EN/EN61000-4-2,3 ,4,5,6,8,11; BS EN / EN 6154 7, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TPTC 020
Ndị ọzọ	MTBF	860.4K elekere min. Telcordia SR-332 (Bellcore); 228.7K elekere min. MIL-HDBK-217F (25 Celsius)
	Akụkụ	1916337.5mm (LWH)
	Mbukota	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
IHE	A na-atụ usoro niile akọwapụtaghị aha ya na ntinye 230VAC, akara ugbu a yana 25 ″ C nke ọnọdụ okpomọkụ. Enwere ike ịchọrọ iwepụ ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC” maka nkọwa. A na-atụ ogologo oge nhazi na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge ahazi A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. Usoro a na-ezute ogologo ndụ ndụ nke> 50,000 awa ọrụ mgbe Tease, karịsịa @) point (ma ọ bụ TMP, kwa DLC), bụ ihe dịka 75 ° C ma ọ bụ obere. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com The ambient okpomọkụ derating nke 3.5°C/1000m nwere fanless ụdị na nke 5°C/1000m nwere fan ụdị maka ịrụ ọrụ elu karịa 2000m(6500ft). Maka ndetu ngwa ọ bụla yana ịkpachara anya nrụnye ọrụ akaebe mmiri IP, biko rụtụ aka n'akwụkwọ ntuziaka onye ọrụ tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf Dabere na IEC 62386-101 / 102 DALI ike na usoro oge na nkwụsịtụ, oge nhazi kwesịrị iji onye njikwa DALI nwalee nke nwere ike ịkwado ike DALI na ọrụ, ma ọ bụghị na oge nhazi ga-adị elu karịa 0.5 sekọnd maka ụdị DA. . * Nkwụghachi ụgwọ ngwaahịa: maka ozi zuru ezu, biko rụtụ aka https://www.meanwell.com/serviceDisclaimer.aspx

DIMMING ọrụ

* Ụkpụrụ dị egwu maka mmepụta ụdị PWM

A na-enweta ntu oyi site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.

* Ọrụ 3 n'ime 1 na-ebelata (maka oghere-ụdị)

Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM -: 0 - 1 OVDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide.

Isi iyi na-ebelata ugbu a site na ọkọnọ ike: 1 OOμA (ụdị.)

Na-etinye mgbakwunye O - 1 OVDC

Itinye mgbakwunye 10V PWM mgbama (ugboro ugboro 100Hz- 3KHz):

Na-etinye nguzogide mgbakwunye:

Mara:

Min. okirikiri ọrụ nke mmepụta ugbu a bụ ihe dị ka 0.15%, na ntinye dimming bụ banyere 6KO ma ọ bụ 0.6VDC, ma ọ bụ 10V PWM mgbama na 6% ọrụ okirikiri.
Usoro ọrụ nke mmepụta ihe dị ugbu a nwere ike ịdaba na 0% mgbe ntinye ntinye na-erughị 6KO ma ọ bụ ihe na-erughị 0.6VDC, ma ọ bụ 1 0V PWM mgbama nwere ọrụ ọrụ na-erughị 6%.

* DALI Interface (akụkụ isi; maka DA/DA2-ụdị)

Tinye akara ngosi DALI n'etiti DA+ na DA-.
DALI protocol nwere otu iri na isii na adreesị 16.
A na-edozi nzọụkwụ mbụ na 0.2% nke mmepụta

ỌKWU Mpụta vs OMUME

AKWỤKWỌ AKWỤKWỌ

※ Nwepu ọkwa dị n'okpuru obere ntinye voltage.

MMADỤ IKE (PF).

※ Tcase na 80 ℃

Mkpokọta mgbasa ozi ọjọọ (THD)

※ 48V Model, Tcase na 80 ℃

Ịrụ ọrụ vs ibu

Usoro PWM-120 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90.5% na ngwa ubi.
※ 48V Model, Tcase na 80 ℃

OGE NDỤ

Ihe Ngosi

Nkọwapụta igwe

Ụdị oghere

DA/DA2-Ụdị

Na -akwado ntụnye ntụnye

Akwụkwọ ntuziaka nwụnye

Njikọ maka ụdị oghere

Ịdọ aka ná ntị

Tupu ịmalite nrụnye ma ọ bụ ọrụ mmezi ọ bụla, biko kwụpụ ọkụ eletrik na akụrụngwa. Gbaa mbọ hụ na enweghị ike ijikọ ya ọzọ n'amaghị ama!
Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ.
Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ịbawanye okpomoku akụrụngwa nke dị n'ime ma ga-achọkwa de-rating na mmepụta ugbu a.

Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka na nkọwapụta ya.
Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ na-esi ike ka mmiri ghara ịbanye n'ime usoro ahụ.
Maka ndị ọkwọ ụgbọ ala LED dimmable, gbaa mbọ hụ na onye na-ahụ maka ihe na-akụda mmụọ gị nwere ike ịnya nkeji ndị a. Usoro PWM chọrọ 0.15mA nke ọ bụla.

Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke.
Ejikọla “DIM- na -V”.
Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị nkeji iri atọ.

A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.

Akwụkwọ / akụrụngwa

MMA nke ọma PWM-120 120W Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka
PWM-120, 120W Constant Voltage PWM Output LED Driver, PWM Output LED Driver, 120W Constant Voltage Onye ọkwọ ụgbọ ala, onye ọkwọ ụgbọ ala, onye ọkwọ ụgbọ ala

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Atụmatụ

Ngwa

Nkọwa