PWM-60 usoro 60W Constant Voltagna PWM Output LED Driver
Atụmatụ
- Mgbe niile Voltage
- Mmepụta ụdị PWM
- Ngwa ọkụ mberede dị ka IEC61347-2-13 si dị
- Ọrụ PFC na-arụ ọrụ na nhazi klas l/2
- Enweghị ibu ike oriri <0.5W
- Ejiri ọkwa IP67 kpuchie ya nke ọma
- Ọrụ: 3 na 1 dimming (dim-to-off); DALI/DALI-2
- Ọkwa mbelata kacha nta 0.2% maka ụdị DALI
- Oge ndụ nkịtị> 50000 awa na akwụkwọ ikike afọ 5
Ngwa
- Igwe ọkụ warara LED
- Ọkụ ọkụ ime ụlọ
- Ọkụ eji achọ mma LED
- LED architecture ọkụ
- Igwe ọkụ ụlọ ọrụ
- Pịnye “HL” maka ojiji na klaasị I, Nkeji 2 dị ize ndụ (nkewa).
Nkọwa
Usoro PWM-60 bụ onye ọkwọ ụgbọ ala 60W LED AC / DC na-egosipụta voltaji mgbe niiletage mode na mmepụta ụdị PWM, nke na-enwe ike ịnọgide na-enwe nchapụta nchapụta mgbe ị na-anya ụdị ụdị LED ọ bụla. PWM-60 na-arụ ọrụ site na 90 ~ 305VAC ma na-enye ụdị dị iche iche gosiri voltage sitere na 12V na 48V. Ekele maka arụmọrụ dị elu ruo 90%, na-enweghị ihe ngosi, usoro dum nwere ike ịrụ ọrụ maka -40C ~ + 85C ọnọdụ okpomọkụ n'okpuru ikuku ikuku n'efu. A na-eji usoro nchebe IP67 dị elu mee ihe na usoro ahụ dum ma dị mma iji rụọ ọrụ maka nkụ, damp ma ọ bụ ebe mmiri. PVWM-60 nwere ọrụ dimming nke na-agbanwe ọrụ okirikiri nke mmepụta, na-enye nnukwu mgbanwe maka ngwa ibe ọkụ LED.
Ihe ntinye ihe nlere
| Ụdị | Ọkwa P | Ọrụ | Rịba ama |
| Oghere | P67 | 3 na 1 dimming ọrụ (0 ~ 10 dc, 10 PWM mgbaàmà na nguzogide) | n ngwaahịa |
| DA | P67 | Teknụzụ njikwa DAL. (maka 12/24 nwere naanị ụdị DA) | n ngwaahịa |
| DA2 | P67 | DAL -2 teknụzụ njikwa. (maka 12/24 nwere ụdị DA2 naanị) | n ngwaahịa |
Nkọwapụta
| Ụdị | PWM-60-12 | PWM-60-24 | PWM-60-36 | PWM-60-48 | |
|
Mpụta | DC VOLTAGE | 12V | 24V | 36V | 48V |
| EKWERE UGBUA | 5A | 2.5A | 1.67A | 1.25A | |
| EGO IKE | 60W | 60W | 60.12W | 60W | |
| IGBU RANGE | 0 ~ 100% | ||||
| PWM Ugboro ugboro (Ụdị.) | 1.47kHz maka oghere/DA-ụdị, 2.5kHz maka DA2-ụdị | ||||
| NTKWU, NA-ebili oge Rịba ama. 2 Rịba ama. 9 | 500ms, 80ms/115AC ma ọ bụ 230VAC | ||||
| Jidesie oge (Ụdị) | 16ms / 115VAC ma ọ bụ 230VAC | ||||
|
Ntinye | VOLTAGE nso Rịba ama.3 | 90 ~ 305VAC 127 ~ 431VDC (Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC”) | |||
| Ugboro ugboro | 47 ~ 63Hz | ||||
| IHE MGBE IKE (Ụdị) | PF> 0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC @ zuru ibu (Biko rụtụ aka na ngalaba “PAWER FACTOR (PF) CharacTERISTIC” | ||||
| Mkpokọta ỌR .A NKWUKWU | THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Biko rụtụ aka na ngalaba “TOTAL HARMIC DISTORTION”) | ||||
| OKWU (Ụdị) | 86% | 89% | 90% | 90% | |
| AC ugbu a (Ụdị) | 0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC | ||||
| INRUSH Ugbu a (pdị.) | Oyi malitere 50A(twidth=270μs tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410 | ||||
| MAX. Mba. nke PSU na 16A CIRCUIT BREAKER | Nkeji 9 (onye na-emebi okirikiri nke ụdị B) / nkeji 16 (onye na-emebi okirikiri nke ụdị C) na 230VAC | ||||
| NKWUKWU UGBUA | <0.25mA / 277VAC | ||||
| Mba Ibu IKE erimeri | <0.5W | ||||
|
Nchedo | bufee | 108 ~ 130% gosiri ike mmepụta | |||
| Ọnọdụ mgbakasị ahụ, na-agbake na-akpaghị aka ka ewepụrụ ọnọdụ mmejọ | |||||
| Obere oge | Mechie o/p voltage, megharịa ike iji nwetaghachi (belụsọ ụdị DA2) Ọnọdụ Hiccup, na-agbake na-akpaghị aka mgbe ewepụsịrị ọnọdụ fauit (naanị maka ụdị DA2) | ||||
| N'elu VOLTAGE | 15 ~ 17V | 28 ~ 34V | 41 ~ 46V | 54 ~ 60V | |
| Mechie o/p voltage, re-ike na-agbake | |||||
| GARA Okpomọkụ | Mechie o/p voltage, re-ike na-agbake | ||||
|
Gburugburu Ebe Obibi | ỌRỤ NA-arụ ọrụ. | Tcase = -40 ~ +85 ℃ (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE") | |||
| MAX. IGBU OZI. | Akpa =+85 ℃ | ||||
| Iru mmiri na-arụ ọrụ | 20 ~ 95% RH na-abụghị condensing | ||||
| Nchekwa TEMP., IHU URU | -40 ~ +80 ℃, 10 ~ 95% RH | ||||
| TEMP. EGO | 0.03%/℃ (0 ~ 50 ℃) | ||||
| VIBRATION | 10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe | ||||
|
Nchekwa & EMC | Ọkọlọtọ nchekwa Rịba ama. 5 | UL8750 (ụdị "HL") (ma e wezụga maka DA-Ụdị), UL879 (maka 12V,24V Ụdị oghere naanị), CSA C22.2 Nke 250.13-12; ENEC BS EN / EN61347-1, BS EN / EN61347-2-13 nọọrọ onwe ya, BS EN / EN62384, IP67, BIS IS15885 (maka 12,24, 48 Ụdị oghere naanị), EAC TP TC 004, GB19510.1, GB19510.14 kwadoro; Nhazi na-ezo aka na BS EN/EN60335-1; Dabere na BS EN/EN61347-2-13 appendix J dabara adaba maka nrụnye mberede | |||
| Ụkpụrụ DALI | IEC62386-101, 102 maka DA/DA207,251-ụdị naanị,Ngwaọrụ ụdị 2(DT6) | ||||
| NA -ECHE VOLTAGE | I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC | ||||
| Nguzogide dịpụrụ adịpụ | I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH | ||||
| EMC EMISỌ Rịba ama. 6 | Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load≧60%); BS EN/EN61000-3-3,GB17743 na GB17625.1,EAC TP TC 020 | ||||
| EMC MGBE | nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TP TC 020 | ||||
| Ndị ọzọ | MTBF | 996K elekere min. Telcordia SR-332 (Bellcore); 271.03K elekere min. MIL-HDBK-217F (25 ℃) | |||
| Akụkụ | 150*53*35mm (L*W*H) | ||||
| Mbukota | 0.49Kg; 30pcs/15.7Kg/1.0CUFT | ||||
| IHE | 1. A na-atụle paramita niile akọwaghị aha ya na ntinye 230 AC, akara ugbu a na 25 ℃ nke okpomọkụ ambient. 2. Enwere ike ịwepu ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “STAT C CHARACTER ST C” maka nkọwa. 3. A na-atụ ogologo oge nhazi oge na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro. 4. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. 5. Usoro a na-ezute ahụkarị ndụ atụmanya nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc ebe (ma ọ bụ TMP, kwa DLC), bụ banyere 75 ℃ ma ọ bụ obere. 6. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com 7. The ambient okpomọkụ derating nke 3.5 ℃ / 1000m na fanless ụdị na nke 5 ℃ / 1000m na fan ụdị maka arụ ọrụ elu karịa 2000m (6500ft). 8. Maka ihe ọ bụla ngwa ndetu na P water proof function installation, biko rụtụ aka na ntuziaka onye ọrụ anyị tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. Dabere na EC 62386-101 / 102 DAL ike na usoro oge na nkwụsịtụ, oge nhazi ahụ kwesịrị ịnwale ya na onye na-ahụ maka DAL nke nwere ike ịkwado ike DAL na ọrụ, ma ọ bụghị na oge nhazi ga-adị elu karịa 0.5 sekọnd maka. Ụdị DA. ※ Nkwụghachi ụgwọ ngwaahịa: Maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx | ||||
DIMMING ọrụ
3 n'ime 1 arụrụ arụ ọrụ (maka oghere-ụdị)
- Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM-: 0- 10VDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide.
- Isi iyi na-ebelata ugbu a site na ọkọnọ ike: 100guA (ụdị.)
Na-etinye nguzogide mgbakwunye
Rịba ama
- Min. Ọrụ okirikiri nke mmepụta ihe dị ugbu a bụ ihe dị ka 6% na mmepụta ugbu a adịghị akọwapụta mgbe 0%< lout<6%.
- Usoro ọrụ nke mmepụta ihe ugbu a nwere ike ịdaba na 0% mgbe ntinye na-ebelata bụ ihe gbasara OkQ ma ọ bụ OVdc, ma ọ bụ 10V PWM mgbama nwere 0% ọrụ okirikiri.
* DALI Interface (akụkụ isi; maka DA/DA2-ụdị)
- Tinye akara ngosi DALI n'etiti DA+ na DA-
- DALI protocol nwere otu iri na isii na adreesị 16.
- A na-edozi nzọụkwụ mbụ na 0.2% nke mmepụta
ỌKWU Mpụta vs OMUME
AKWỤKWỌ AKWỤKWỌ
MMADỤ IKE (PF).
Mkpokọta mgbasa ozi ọjọọ (THD)
Ịrụ ọrụ vs ibu
Usoro PWM-60 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90% na ngwa ubi. x 48V Model, Tcase na 75C
Ụdị X48V, Tcase na 75C
OGE NDỤ
Ihe Ngosi
Nkọwapụta igwe 
Na -akwado ntụnye ntụnye 
Akwụkwọ ntuziaka nwụnye
Njikọ maka ụdị oghere
Ịdọ aka ná ntị
- Tupu ịmalite nrụnye ma ọ bụ ọrụ mmezi ọ bụla, biko kwụpụ ọkụ eletrik na akụrụngwa.
- Gbaa mbọ hụ na enweghị ike ijikọ ya ọzọ n'amaghị ama! Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ.
- Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ịbawanye okpomoku akụrụngwa nke dị n'ime ma ga-achọkwa de-rating na mmepụta ugbu a.
- Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ.
- Biko rụtụ aka na nkọwapụta ya. Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ na-esi ike ka mmiri ghara ịbanye n'ime usoro ahụ.
- Maka ndị ọkwọ ụgbọ ala LED dimmable, gbaa mbọ hụ na onye na-ahụ maka ihe na-akụda mmụọ gị nwere ike ịnya nkeji ndị a.
- Usoro PWM chọrọ 0.15mA nkeji ọ bụla Tc max. achọpụtara na akara ngwaahịa.
- Biko hụ na okpomọkụ nke Tc point agaghị agafe oke. Ejikọkwala "DIM- na Vo-".
- Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị nkeji iri atọ.
- A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ.
- Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.
Akwụkwọ / akụrụngwa
 | PWM-60 usoro 60W Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye ọrụ Usoro PWM-60, 60W Constant Voltage PWM, Ọkwọ ụgbọala na-emepụta ihe, Voltage PWM, onye ọkwọ ụgbọ ala LED |
 | MEEAN nke ọma PWM-60 usoro 60W Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye nwe PWM-60 usoro 60W Constant Voltage PWM Output LED Driver, PWM-60 series, 60W Constant Voltage PWM Mmepụta LED ọkwọ ụgbọ ala, Voltage PWM mmepụta onye ọkwọ ụgbọ ala, onye ọkwọ ụgbọ ala |
 | EZIOKWU PWM-60 Series 60W Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye nwe PWM-60 Series 60W Constant Voltage PWM Mmepụta Ọkwọ ụgbọ ala, PWM-60 Series, 60W Constant Voltage PWM Mmepụta LED ọkwọ ụgbọ ala, Voltage PWM Output LED Driver, Output LED Driver, LED Driver |
