PWM-120-12 Series Constant Voltagna PWM Output LED Driver
“
Nkọwapụta:
- Ụdị: PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48
- DC Voltage: 12V, 24V, 36V, 48V
- Enyere aha ugbu a: 10A, 5A, 3.4A, 2.5A
- Enyere ike: 120W (maka ụdị niile)
- Oke mbelata: 0-100%
- Ugboro PWM: 1.47kHz maka oghere/DA-ụdị, 2.5kHz maka
DA2-Ụdị - Ntọlite, Oge Bilie: 500ms, 80ms
- Voltage Oke: 90 - 305VAC, 127 - 431VDC
- Ogologo oge: 47 - 63Hz
- Ihe kpatara ike: PF>0.97/115VAC, PF>0.96/230VAC,
PF>0.93/277VAC @ ibu zuru oke - Mkpokọta ndakpọ ndakpọ: THD <20%
- Ịrụ ọrụ: 88.5% - 90%
- Oke. Ọnụ ọgụgụ nke PSU na 16A Circuit Breaker: nkeji 4 (okirikiri
onye na-agbaji ụdị B) / 6 nkeji (okirikiri nke ụdị C) na
230VAC
Ntuziaka ojiji:
1. Nwụnye:
- Gbaa mbọ hụ na ike ntinye dabara na oke ntinye AC akọwapụtara
maka ihe nlereanya gị.
- Jikọọ onye ọkwọ ụgbọ ala LED na vol kwesịrị ekwesịtage isi iyi na
hụ na ntọala kwesịrị ekwesị.
2. Ntughari:
- Gbanwee oke nhụsianya site na 0 ruo 100% dịka ọkụ gị si dị
chọrọ.
- Jiri ntọala ugboro PWM akọwapụtara maka kacha mma
arụmọrụ.
3. Nchekwa Eletriki:
- Soro ntuziaka nchekwa eletrik niile dị mkpa na
ụkpụrụ mgbe ị na-etinye na iji onye ọkwọ ụgbọala LED.
– Agafela ọnụ ọgụgụ PSU kachasị na igwe mgbawa sekit
iji zere ibufe ibu.
Ajụjụ:
Ajụjụ: Kedu ihe m ga-eme ma ọ bụrụ na onye ọkwọ ụgbọ ala LED anaghị agba ọkụ?
A: Lelee njikọ ike ntinye wee chọpụta na voltage
isi iyi dị n'ime oke akọwapụtara.
Ajụjụ: Enwere m ike ijikọ ọtụtụ LED na otu ọkwọ ụgbọ ala?
A: A na-atụ aro ka ịgbaso ntuziaka onye nrụpụta na
ọnụ ọgụgụ kachasị elu nke LED nwere ike jikọọ na otu ọkwọ ụgbọ ala
iji hụ na arụ ọrụ kwesịrị ekwesị na ogologo ndụ nke LED.
"'
120W Constant Voltagna PWM Output LED Driver
PWM-120 usoro
Akwụkwọ ntuziaka onye ọrụ
2
(maka DA2-naanị ụdị)
Ntinye AC: 100-240Vac (maka naanị DA2-ụdị)
IP67
Ọ bụ 15885
THOMAS SAMUEL
THOMAS SAMUEL
05
ewezuga ụdị 12DA
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
120W PWM Ọkwọ ụgbọala na-ebupụta LED
PWM-120 usoro
Nkọwapụta
Ụdị
PWM-120-12
PWM-120-24
PWM-120-36
PWM-120-48
DC VOLTAGE
12V
24V
36V
EKWERE UGBUA
10A
5A
3.4A
EGO IKE
120W
120W
122.4W
Mpụta
ỤTỌ DIMMING
0 ~ 100%
Ugboro ugboro PWM (Ụdị) 1.47kHz maka oghere/DA-ụdị, 2.5kHz maka ụdị DA2
NTKWU, NA-ebili oge
Cheta.2 Cheta.9
500ms, 80ms/230VAC ma ọ bụ 115VAC
Jide oge (Ụdị) 16ms/230VAC ma ọ bụ 115VAC
VOLTAGE RANGE Rịba ama.3
90 ~ 305VAC 127 ~ 431VDC (Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")
Ugboro ugboro 47 ~ 63Hz
IHE MGBE IKE (Ụdị)
PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ zuru ibu (Biko rụtụ aka na ngalaba "POWER FACTOR (PF) CharacTERISTIC"
48V 2.5A 120W
Mkpokọta ndakpọ ndakpọ
THD< 20% (@load60%/115VAC, 230VAC; @load75%/277VAC)
Ntinye
OKWU (Ụdị)
88.5%
90%
90%
AC ugbu a (Ụdị)
1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
INRUSH UGBUA (Ụdị) Mmalite Oyiyi 60A (twidth=520s tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
90.5%
MAX. Mba. nke PSU na 16A CIRCUIT BREAKER
Nkeji 4 (onye na-emebi okirikiri nke ụdị B) / nkeji 6 (onye na-emebi okirikiri nke ụdị C) na 230VAC
NKWUKWU UGBUA
<0.25mA / 277VAC
Ọ BỤGHỊ IBU/NKWUKWU IKE
Enweghị ike ibu <0.5w maka ụdị oghere; ike oriri <0.5W maka ụdị DA-ụdị/DA2
bufee
108 ~ 130% akara mmepụta ike Hiccup mode, na-agbake na-akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ.
MKPỤRỤ MKPA MKPỌ
N'elu VOLTAGE
Ọnọdụ hiccup 12V / 24V na ọnọdụ 36V / 48V mechie (gụnyere ụdị DA-ma e wezụga ụdị DA2) Ọnọdụ Hiccup, na-agbake na-akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ (naanị maka ụdị DA2)
15 ~ 17V
28 ~ 34V
41 ~ 46V
54 ~ 60V
Mechie o/p voltage, re-ike na-agbake
GARA Okpomọkụ Mechie o/p voltage, re-ike na-agbake
ỌRỤ NA-arụ ọrụ.
Tcase = -40 ~ +90 (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE" ngalaba)
MAX. IGBU OZI.
Akpa =+90
Gburugburu Ebe obibi na-arụ ọrụ iru mmiri
20 ~ 95% RH na-abụghị condensing
Okpomọkụ Nchekwa., Ọdịmma iru -40 ~ +80, 10 ~ 95% RH
TEMP. EGO
± 0.03% / (0 ~ 45, ma e wezụga 0 ~ 40 maka 12V)
VIBRATION
10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
UL8750 (ụdị "HL") (ma e wezụga maka ụdị 12DA), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,
Ọkọlọtọ nchekwa
Rịba ama. 5
BS EN/EN62384 nọọrọ onwe ya, IP67, BIS IS 15885 (Part2/Sec13) (maka 12,24 oghere na DA2 Ụdị), EAC TP TC 004, GB19510.1, GB19510.14 kwadoro; Nhazi na-ezo aka na BS EN/EN60335-1; Dị ka BS EN/EN61347-2-13 si kwuo
appendix J dabara adaba maka nrụnye ihe mberede (EL)(AC ntinye: 100-240Vac)(maka DA2-ụdị naanị)
Ụkpụrụ DALI
IEC62386-101, 102 maka DA/DA207,251-Ụdị naanị, Ngwaọrụ ụdị 2(DT6)
SAFE & KWESỊRỊ VOLTAGEI/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
EMC
Isolation Iguzogide I/PO/P: 100M Ohms / 500VDC / 25/ 70% RH
EMC EMISSION Note.6 IMMUNITY EMC
Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load60%); BS EN/EN61000-3-3,GB/T 17743,GB17625.1;EAC TP TC 020
nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TP TC 020
Ndị ọzọ MTBF DIMENSION
2243.7K elekere min. Telcordia SR-332 (Bellcore); 191*63*37.5mm (L*W*H)
228.7K elekere min. MIL-HDBK-217F (25)
Mbukota
0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
1. A na-atụle paramita niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a na 25 nke ọnọdụ okpomọkụ.
IHE 2. Enwere ike ịwepu ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC” maka nkọwa. 3. A na-atụ ogologo oge nhazi oge na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge ahazi.
4. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na arụmọrụ EMC ga-emetụta
site na nrụnye zuru oke, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.
(dị ka dị na https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Usoro a na-ezute ụdị ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc point (ma ọ bụ TMP, kwa DLC), bụ banyere 75 ma ọ bụ obere.
6. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com 7. The ambient okpomọkụ derating nke 3.5/1000m na fanless ụdị na nke 5/1000m na fan ụdị maka ịrụ ọrụ elu karịa 2000m(6500ft).
8. Maka ihe ọ bụla ngwa ndetu na IP mmiri àmà ọrụ nrụnye ịkpachara anya, biko rụtụ aka anyị ọrụ ntuziaka tupu iji.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
9. Dabere na IEC 62386-101 / 102 DALI ike na usoro oge na nkwụsịtụ, oge nhazi kwesịrị iji nwalee onye na-ahụ maka DALI nke nwere ike ịkwado ike DALI na ọrụ, ma ọ bụghị na oge nhazi ga-adị elu karịa 0.5 sekọnd maka. Ụdị DA.
Nkwụghachi ụgwọ ngwaahịa maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
120W PWM Ọkwọ ụgbọala na-ebupụta LED
DIMMING ọrụ
PWM-120 usoro
AC/L (Braw) AC/N (Blue)
PWM-120
Ụkpụrụ nhụsianya maka mmepụta ụdị PWM A na-enweta Dimming site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.
Mpụta DC ugbu a ON
Io=0A
Gbanyụọ TON
T
DIM+(Purple)* DIM-(Pink)**+V(Red)(Brown for DA-type) -V(Black)(Blue for DA-type)
* DIM+ maka oghere-Ụdị DA+ maka ụdị DA/DA2
* *DIM- maka oghere-ụdị DA- maka ụdị DA/DA2
TON
okirikiri ọrụ(%) =
×100%
T
Mmepụta ugboro PWM: 1.47kHz maka oghere/DA ụdị 2.5kHz maka DA2-ụdị
3 n'ime 1 arụrụ arụ ọrụ (maka oghere-ụdị)
Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM-: 0 ~ 10VDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide. Isi iyi na-ebelata ugbu a site na ọkọnọ ike: 100A (ụdị.)
Na-etinye mgbakwunye 0 ~ 10VDC
+ V +
eriri LED
-V DIM+
DIM-
–
+ Mgbakwunye Voltage
–
Ejikọla “DIM-na -V”
+ -
10%
0.15%
0.6V 1V
Usoro ọrụ nke mmepụta ugbu a (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Ntinye ngbanwe: mgbakwunye vol.tage
Itinye mgbakwunye 10V PWM mgbama (ugboro ugboro 100Hz ~ 3KHz):
+ V +
eriri LED
-V DIM+
DIM-
Mgbama PWM mgbakwunye
Ejikọla “DIM-na -V”
+ -
10% 0.15%
6% 10%
Usoro ọrụ nke mmepụta ugbu a (%)
100% 90% 80% 70% 60% 50% 40% 30% 20%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Ọrụ okirikiri nke mgbakwunye 10V PWM mgbama mgbanaka ntinye
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
120W PWM Ọkwọ ụgbọala na-ebupụta LED
PWM-120 usoro
Na-etinye nguzogide mgbakwunye:
+ V +
eriri LED
-V DIM+
DIM-
Mgbakwunye Nguzogide
Ejikọla “DIM-na -V”
+ -
10% 0.15%
6K/N 10K/N
Usoro ọrụ nke mmepụta ugbu a (%)
100% 90% 80% 70% 60% 50% 40% 30% 20%
0% dị mkpụmkpụ
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=ọnụọgụ ọkwọ ụgbọala maka synchronizeddimmingoperation)
Ntinye na-ebelata: Mgbakwunye mgbakwunye
Rịba ama: 1. Min. okirikiri ọrụ nke mmepụta ugbu a bụ ihe dị ka 0.15%, na ntinye dimming bụ ihe dịka 6K ma ọ bụ 0.6VDC, ma ọ bụ 10V PWM mgbama na 6% ọrụ okirikiri. 2. The ọrụ okirikiri nke mmepụta ugbu a nwere ike ịdaba na 0% mgbe ntule ntinye bụ ihe na-erughị 6K ma ọ bụ ihe na-erughị 0.6VDC, ma ọ bụ 10V PWM mgbaàmà na ọrụ okirikiri na-erughị 6%.
DALI Interface (akụkụ isi; maka DA/DA2-ụdị) Tinye akara ngosi DALI n'etiti DA+ na DA-. DALI protocol nwere otu iri na isii na adreesị 16. A na-edozi nzọụkwụ mbụ na 64% nke mmepụta
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
Ibu (%)
120W PWM Ọkwọ ụgbọala na-ebupụta LED
ỌKWU Mpụta vs OMUME
PWM-120 usoro
100
Ntinye 80 230VAC naanị
60 50 40
20
12V naanị
-40-25
0
15
30
40 45 50
60
Ambient okpomọkụ, Ta ()
70 (n'ihu)
Ibu (%)
100
Ntinye 80 230VAC naanị
60
40
20
-40-25
20
45
65
75
85
90 (n'ihu)
Tcase ()
AKWỤKWỌ AKWỤKWỌ
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
Ntinye VOLTAGE (V) 60Hz De-rating dị mkpa n'okpuru obere ntinye voltage.
Mkpokọta mgbasa ozi ọjọọ (THD)
Ụdị 48V, Tcase na 80
30%
25%
20%
277VAC
15%
230VAC
115VAC
10%
5%
0%
50%
60%
70%
80%
90%
100%
Ibu
OKWU(%)
PF
MMADỤ IKE (PF).
Ihe dị ka afọ 80
1 .0 0 0 .9 5 0 .9 0 0 .8 5 0 .8 0 .0 7 5 .0 7 . 0 0 6 .5 0 6 .0 0
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% (75W)
Ibu
277V 230V 115V
Ịrụ ọrụ vs ibu
Usoro PWM-120 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90.5% na ngwa ubi. Ụdị 48V, Tcase na 80
92 91 90 89 88 87 86 85 84 83 82 81 80
10% 20% 30% 40% 50% 60% 70% 80% 90%
277V 230V 115V
Ibu
Ibu THD (%)
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
120W PWM Ọkwọ ụgbọala na-ebupụta LED
PWM-120 usoro
Oge ndụ
Oge ndụ (Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase()
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
120W PWM Ọkwọ ụgbọala na-ebupụta LED
PWM-120 usoro
Ihe Ngosi
Nzacha EMI
I/P
&
Ndị na-emezigharị
PFC CIRCUIT
ỊGBANWE IKE
OTP
OLP
PWM & PFC njikwa
NKWUKWU &
Nzacha
PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz
OLP
DIMMING CIRCUIT
MKPỤTA Nchọpụta
+V -V DIM+ DIM-
OVP
Nkọwapụta igwe
Ụdị oghere
Okwu ikpe PWM-120
Nkeji:mm Ntachi Obi:±1
300±20
AC/L (Braw) AC/N (Blue)
50± 3 SJTW 18AWG × 2C
5
191 5
63 31.5
2-4.5
T ikpe tc
95.5
5
tc: Max. Ọnọdụ okpomọkụ
5
300±20
UL2464 18AWG×2C SJTW 14AWG×2C 50±3
DIM+(Paraple) DIM-(Pink) +V(Red) -V(Black)
37.5
3
DA/DA2-Ụdị
300±20
AC/L (Braw) AC/N (Blue)
50±3
SJOW 17AWG×2C &H05RN-F 1.0mm2
5
191 5
63 31.5
2-4.5
T ikpe tc
95.5
5
tc: Max. Ọnọdụ okpomọkụ
5
300±20 UL2464 18AWG×2C SJOW 17AWG×2C 50±3 &H05RN-F 1.0mm2
DA+(Purple) DA-(Pink) +V(Brown) -V(Blue)
37.5
3
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
120W PWM Ọkwọ ụgbọala na-ebupụta LED
Na -akwado ntụnye ntụnye
Njikọ akwụkwọ ntuziaka nwụnye maka ụdị oghere
PWM-120 usoro
AC/L(Brown) AC/N(blue)
DIM-(P-INK) +
DIM+(PIPLE)
-V(oji) +
+V(RED)
0 ~ 10Vdc ma ọ bụ 10V PWM ma ọ bụ iguzogide Dimmer ma ọ bụ DALI Dimmer
eriri LED
Ịdọ aka ná ntị Tupu ịmalite ọrụ nrụnye ma ọ bụ nrụzi ọ bụla, biko kwụpụ ọkụ eletrik na ụlọ ọrụ ahụ. Gbaa mbọ hụ
na enweghị ike ijikọ ya ọzọ n'amaghị ama! Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe
ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ. Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru oke ọnọdụ okpomọkụ nwere ike ịbawanye elu
okpomọkụ akụrụngwa akụrụngwa ga-achọ de-rating na mmepụta ugbu a. Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka
na nkọwapụta ya. Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ bụ
siri ike ka mmiri ghara ịbata n'ime usoro. Maka ndị ọkwọ ụgbọ ala LED nwere ike ịnya ụgbọ ala, gbaa mbọ hụ na onye njikwa gị nwere ike ịnya nkeji ndị a.
chọrọ 0.15mA nke ọ bụla. Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke. Ejikọla “DIM- na -V”. Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị iri atọ
nkeji. A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na EMC
arụ ọrụ ga-emetụta site na nrụnye zuru oke, ndị na-emepụta ngwá ọrụ ikpeazụ ga-emezigharị ntụziaka EMC na nrụnye zuru ezu ọzọ.
Ebutere na Arrow.com.
File Aha: PWM-120-SPEC 2024-09-25
Akwụkwọ / akụrụngwa
 |
EZIOKWU PWM-120-12 Series Constant Voltagna PWM Output LED Driver [pdf] Akwụkwọ ntuziaka onye nwe PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, PWM-120-12 Series Constant Vol.tage PWM Mmepụta Ọkwọ ụgbọala, PWM-120-12 Series, Voltage PWM Mmepụta LED ọkwọ ụgbọ ala, Voltage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver |