PWM-120-12 Constant Voltagna PWM mmepụta KNX LED ọkwọ ụgbọ ala
“
Nkọwapụta ngwaahịa
| Ụdị | DC VOLTAGE | EKWERE UGBUA | EGO IKE | ỤTỌ DIMMING | Mpụta |
|---|---|---|---|---|---|
| PWM-120-12 | 12V | 10A | 120W | 0 ~ 100% | Mmepụta PWM KNX LED ọkwọ ụgbọ ala |
| PWM-120-24 | 24V | 5A | 120W | 0 ~ 100% | Mmepụta PWM KNX LED ọkwọ ụgbọ ala |
Ntuziaka ojiji ngwaahịa
Nwụnye
1. Gbaa mbọ hụ na ike ntinye dị n'ime voltage oke
(90-305VAC, 127-431VDC).
2. Jikọọ onye ọkwọ ụgbọ ala na usoro ọkụ ọkụ LED na-esote
polarity ziri ezi.
Ntọala nchapụta
1. Jiri ngwa ETS dozie ugboro PWM n'ime
ogologo nke 200-4000Hz.
2. Dimming nso nwere ike ịtọ site 0% ka 100% dị ka gị ọkụ
chọrọ.
Njikwa Ike
1. Onye ọkwọ ụgbọ ala nwere ihe ikike nke PF> 0.97/115VAC,
PF>0.96/230VAC, PF>0.94/277VAC na ibu zuru oke.
2. Mkpokọta harmonic distortion na-nọgidere n'okpuru 20% n'okpuru
ọnọdụ ibu akọwapụtara.
Akpachara anya maka nchekwa
1. Agafela ọnụ ọgụgụ PSU kachasị nke ekwenyere na sekit
emebi iji gbochie ibu ibu.
2. Soro kwesịrị ekwesị grounding na wiring omume n'oge
echichi iji zere ihe egwu ọkụ eletrik.
Ajụjụ A na-ajụkarị (FAQ)
Ajụjụ: Enwere ike gbanwee oke ngbanwe na PWM-120-KN LED
ọkwọ ụgbọala?
A: Ee, dimming nso nwere ike gbanwee si 0% ka 100% iji
ngwanrọ dakọtara.
Ajụjụ: Gịnị bụ ahụkarị arụmọrụ nke PWM-120-KN
ọkwọ ụgbọala?
A: The ahụkarị arụmọrụ bụ 88.5% maka 12V nlereanya na 90% maka
ụdị 24V.
Ajụjụ: Kedu nkeji ole nke ndị ọkwọ ụgbọ ala PWM-120-KN nwere ike jikọọ na a
ihe mgbaji sekit?
A: Ị nwere ike jikọọ ihe ruru 4 nkeji na ihe mgbawa nke ụdị
B ma ọ bụ ruo nkeji 6 nwere ihe nbibi nke ụdị C na 230VAC.
"'
PWM-120-KN 120W Constant Voltagna PWM mmepụta KNX LED ọkwọ ụgbọ ala
usoro
Akwụkwọ ntuziaka onye ọrụ
05
.%
File Aha: PWM-120-KN-SPEC 2024-03-12
120W PWM Mpụta KNX LED Driver
Usoro PWM-120-KN
Nkọwapụta
Ụdị
PWM-120-12
PWM-120-24
DC VOLTAGE
12V
24V
EKWERE UGBUA
10A
5A
EGO IKE
120W
120W
ỤTỌ DIMMING
0 ~ 100%
Mpụta
FREQUENCY PWM (Ụdị) 200~4000Hz onye ọrụ nwere ike ịgbanwe site na ETS
Nhazi, ebili oge Note.2 500ms, 80ms/ 230VAC ma ọ bụ 115VAC
Jide oge (Ụdị) 16ms/230VAC ma ọ bụ 115VAC
VOLTAGE RANGE Rịba ama.3
90 ~ 305VAC 127 ~ 431VDC (Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")
Ugboro ugboro 47 ~ 63Hz
IHE MGBE IKE (Ụdị)
PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ zuru ibu (Biko rụtụ aka na ngalaba "POWER FACTOR (PF) CharacTERISTIC"
Mkpokọta ndakpọ ndakpọ
THD< 20% (@load60%/115VAC, 230VAC; @load75%/277VAC)
Ntinye
OKWU (Ụdị)
88.5%
90%
AC ugbu a (Ụdị)
1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
INRUSH UGBUA (Ụdị) Mmalite Oyiyi 60A (twidth=520s tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410
MAX. Mba. nke PSU na 16A CIRCUIT BREAKER
Nkeji 4 (onye na-emebi okirikiri nke ụdị B) / nkeji 6 (onye na-emebi okirikiri nke ụdị C) na 230VAC
NKWUKWU UGBUA
<0.25mA / 277VAC
Oriri ike kwụ ọtọ <0.5W
bufee
108 ~ 130% akara mmepụta ike Hiccup mode, na-agbake na-akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ.
Obere oge
Mechie o/p voltage, re-ike na-agbake
Nchedo gafere VOLTAGE
15 ~ 17V mechie o/p voltage, re-ike na-agbake
28 ~ 34V
GARA Okpomọkụ Mechie o/p voltage, re-ike na-agbake
ỌRỤ NA-arụ ọrụ.
Tcase = -40 ~ +90 (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE" ngalaba)
MAX. IGBU OZI.
Akpa =+90
Iru mmiri na-arụ ọrụ
20 ~ 95% RH na-abụghị condensing
Okpomọkụ Nkwakọba Gburugburu Ebe Obibi, iru mmiri -40 ~ +80, 10 ~ 95% RH
TEMP. EGO
± 0.03% / (0 ~ 45, ma e wezụga 0 ~ 40 maka 12V)
VIBRATION
10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe
Ọkọlọtọ nchekwa
Rịba ama. 5
ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 nọọrọ onwe ya, GB19510.14, GB19510.1, EAC TP TC 004 kwadoro
Ụkpụrụ KNX
Protocol enwetara ikike
NA -ECHE VOLTAGE
Nchekwa &
EMC
Nguzogide dịpụrụ adịpụ
EMC EMISSION Note.6
EMC MGBE
MTBF
I/PO/P:3.75KVAC
I/PO/P: 100M Ohms / 500VDC / 25/ 70% RH
Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load60%); BS EN/EN61000-3-3, GB/T 17743, GB17625.1; EAC TP TC 020
nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (n'ahịrị mgbochi 2KV), EAC TP TC 020 1915.2K awa min. Telcordia SR-332 (Bellcore); 205.8K elekere min. MIL-HDBK-217F (25)
Akụkụ ndị ọzọ
191*63*37.5mm (L*W*H)
IHE
Mbukota
0.80Kg; 15pcs / 13.0Kg / 0.87CUFT
1. A na-atụle paramita niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a na 25 nke ọnọdụ okpomọkụ. 2. Enwere ike ịwepu ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC” maka nkọwa. 3. A na-atụ ogologo oge nhazi oge na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro. 4. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na arụmọrụ EMC ga-emetụta
site na nrụnye zuru oke, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. (dị ka dị na https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Usoro a na-ezute ụdị ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc point (ma ọ bụ TMP, kwa DLC). ), dị ihe dị ka afọ 75 ma ọ bụ obere. 6. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com 7. The ambient okpomọkụ derating nke 3.5/1000m na fanless ụdị na nke 5/1000m na fan ụdị maka arụ ọrụ elu karịa 2000m(6500ft). 8. Maka ndetu ngwa ọ bụla na nlezianya ọrụ ntinye mmiri IP, biko rụtụ aka na ntuziaka onye ọrụ anyị tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Nkwụghachi ụgwọ ngwaahịa maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx
File Aha: PWM-120-KN-SPEC 2024-03-12
120W PWM Mpụta KNX LED Driver
DIMMING ọrụ
AC/L (Braw) AC/N (Blue)
PWM-120-KN
Usoro PWM-120-KN
KNX+(Uhie) KNX-(Black) +V(Uhie Uhie) -V(ojii)
Ụkpụrụ nhụsianya maka mmepụta ụdị PWM A na-enweta Dimming site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.
Mpụta DC ugbu a ON
Io=0A
Gbanyụọ TON
T
Usoro ọrụ TON (%) =
×100%
T
Mbupute ugboro ugboro PWM ruo 4KHz
KNXInterface Tinye akara KNX n'etiti KNX+ na KNX-. Enwere ike ibudata mmemme ngwa (database) site na katalọgụ ọnlaịnụ site na ETS ma ọ bụ site na http://www.meanwell.com/productCatalog.aspx
File Aha: PWM-120-KN-SPEC 2024-03-12
Ibu (%)
120W PWM Mpụta KNX LED Driver
ỌKWU Mpụta vs OMUME
Usoro PWM-120-KN
100
Ntinye 80 230VAC naanị
60 50 40
20
12V naanị
-40-25
0
15
30
40 45 50
60
Ambient okpomọkụ, Ta ()
70 (n'ihu)
Ibu (%)
100
Ntinye 80 230VAC naanị
60
40
20
-40-25
20
45
65
75
85
90 (n'ihu)
Tcase ()
AKWỤKWỌ AKWỤKWỌ
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
Ntinye VOLTAGE (V) 60Hz De-rating dị mkpa n'okpuru obere ntinye voltage.
Mkpokọta mgbasa ozi ọjọọ (THD)
Ụdị 24V, Tcase na 80
25
20
15
10
5
0
50%
60%
70%
80%
90%
100%
Ibu
115VAC 230VAC 277VAC
OKWU(%)
PF
MMADỤ IKE (PF).
Ihe dị ka afọ 80
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Ibu
115V 230V 277V
Ịrụ ọrụ vs ibu
Usoro PWM-120-KN nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90% na ngwa ubi. Ụdị 24V, Tcase na 80
100 90 80 70 60 50 40 30 20 10
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Ibu
115V 230V 277V
Ibu THD (%)
File Aha: PWM-120-KN-SPEC 2024-03-12
120W PWM Mpụta KNX LED Driver
Usoro PWM-120-KN
Oge ndụ
Oge ndụ (Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase()
File Aha: PWM-120-KN-SPEC 2024-03-12
120W PWM Mpụta KNX LED Driver
Usoro PWM-120-KN
Ihe Ngosi
Nzacha EMI
I/P
&
Ndị na-emezigharị
PFC CIRCUIT
ỊGBANWE IKE
OTP
OLP
PWM & PFC njikwa
NKWUKWU &
Nzacha
PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz
OLP
DIMMING CIRCUIT
MKPỤTA Nchọpụta
+V -V KNX+ KNX-
OVP
Mara: PWM fosc ebe a enweghị njikọ na mwepu PWM dimming
Nkọwapụta igwe
300±20
AC/L (Braw) AC/N (Blue)
50± 3 SJTW 18AWG × 2C
5
191 KNX bọtịnụ mmemme & LED
5
63 31.5
2-4.5
T ikpe tc
95.5
5
tc: Max. Ọnọdụ okpomọkụ
5
Nọmba ikpe PWM-120-KN
Nkeji: mm
350±10
UL2464 20AWG×2C
SJOW 17AWG×2C 50±3 300±10
KNX+(Uhie) KNX-(Black) +V(Uhie Uhie) -V(ojii)
Njikọ KNX gụnyere n'ime igbe ahụ
37.5
3
Mechanical view nke site arịrịọ
AC/L (Braw) AC/N (Blue)
KNX+(Uhie) KNX-(Black) +V(Uhie Uhie) -V(ojii)
File Aha: PWM-120-KN-SPEC 2024-03-12
120W PWM Mpụta KNX LED Driver
Na -akwado ntụnye ntụnye
Njikọ akwụkwọ ntuziaka nwụnye maka ụdị KNX
Usoro PWM-120-KN
AC/L(Brown) AC/N(blue)
Vo+(RED)
+
–
Vo-(BLACK)
KNX+(RED)
Igwe ọkụ LED ma ọ bụ voltage LED bọlbụ
KNX- (BLACK) PWM KN usoro nwere ike ịbụ ETS adressing/mmemme na-enweghị njikọ na AC mains.
Ụgbọ ala KNX
Ịdọ aka ná ntị Tupu ịmalite ọrụ nrụnye ma ọ bụ nrụzi ọ bụla, biko kwụpụ ọkụ eletrik na ụlọ ọrụ ahụ. Gbaa mbọ hụ na enweghị ike ijikọ ya ọzọ n'amaghị ama! Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe nkwụsị nke 10-15 cm mgbe ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ. Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru ọnọdụ okpomọkụ dị elu nwere ike ịbawanye okpomoku akụrụngwa nke dị n'ime ma ga-achọkwa de-rating na mmepụta ugbu a. Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka na nkọwapụta ya. Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke. Ejikọtala "KNX- na Vo-". A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na nrụnye zuru ezu ga-emetụta arụmọrụ EMC, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ.
File Aha: PWM-120-KN-SPEC 2024-03-12
Akwụkwọ / akụrụngwa
 |
MMADỤ MMA PWM-120-12 Constant Voltagna PWM mmepụta KNX LED ọkwọ ụgbọ ala [pdf] Akwụkwọ ntuziaka onye nwe PWM-120-12, PWM-120-24, PWM-120-12 Vol na-adịtage PWM mmepụta KNX LED ọkwọ ụgbọ ala, PWM-120-12, Constant Voltage PWM Mpụta KNX LED Driver, PWM Mpụta KNX LED Driver, Ọkwọ ụgbọ ala |