ikanam njikwa
(Multi-Zone)

M1C Wireless Controller

The Mini Pro Series LED Remote Control adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (in an unobstructed environment).
When paired with the P5 Controller, one controller is compatible with 5-channel output and supports five types of lamps: DIM, CT, RGB, RGBW, and RGBCW. Within the effective control range, one remote control can control an unlimited number of controllers,  and realize functions such as light on/off, brightness adjustment, color temperature tuning, RGB static color selection, dynamic mode effects activation, and scene recall—meeting users’ needs for different lighting applications.
For zone control: One remote control can manage multiple zones, and multiple controllers can be coded into the same zone to achieve group control of that zone. Pressing the master on/off key of the remote control once can turn on/off the lights in all zones.

Nka nka

Nlereanya	M1C	M1D	M2C	M2D	M4C	M4D	M5C	M5D
Agba	Ọcha	Nwa	Ọcha	Nwa	Ọcha	Nwa	Ọcha	Nwa
Ụdị nchapụta	DIM		CT		RGB/RGBW		RBCW
Ụdị ikuku	RF 2.4GHz
Vol na -arụ ọrụtage	3Vdc (Button battery CR2032×1)
Njikere ugbu a	2 XNUMXuA
Anya nke ime obodo	30M (Under unobstructed conditions)
Ndị njikwa dakọtara	P1、P2、P3、P4、 P5		P2、P3、P4、 P5		P3、P4、 P5		P5
Ọnọdụ okpomọkụ na-arụ ọrụ.	-25 ℃ ~ 50 ℃
Ibu	40g± 10g
Akụkụ	104×58×9mm (remote)，108×63×14mm (remote+hold)

Akụkụ

Ntinye ngwaahịa

Ụzọ abụọ iji dozie njide remote:

1. Dozie ihe njide dịpụrụ adịpụ na mgbidi na nkesa abụọ.
2. Jiri nrapado 3M dozie ihe njide dịpụrụ adịpụ na mgbidi.

Batrị nnọchi

Ọrụ bọtịnụ

Dimming Remote Control M1C/M1D

Mpaghara 1,2,3,4:
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).

Master Power: Turns all lights on or off.
Zone 1, 2, 3, 4: Short press to turn on and select the current zone’s light; long press to turn off the current zone’s light.
Brightness Touch Ring: Touch to change the brightness of the current zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Color Temperature Remote Control M2C/M2D

Mpaghara 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Brightness Touch Ring: Touch to change the color temperature of the current Zone’s light.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 consecutive levels.
Scene: Short press to recall the scene; long press for 3 seconds to save the current light state of the selected Zone to the scene.

Ọrụ bọtịnụ
RGB/RGBW Remote Control M4C/M4D

Mpaghara 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
White Light: For RGBW lights, short press to turn the W channel on or off; long press for 1-6 seconds to continuously adjust the W brightness.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5C/M5D

Mpaghara 1,2,3,4
① Short press to turn on and select the current zone; long press to turn off the current zone’s light;
② If one zone is selected and another zone is pressed within 3 seconds, both zones are selected simultaneously. In this case, the selected zone can be controlled;
③ If the same zone is selected repeatedly within 3 seconds, only that zone will remain selected (e.g., if zones 1 and 2 are selected, if zone 2 is pressed again within 3 seconds, only zone 2 will be selected).
Master Power: Turns all lights on or off.
Zones 1, 2, 3, 4: Short press to turn on and select the current Zone’s light; long press to turn off the current Zone’s light.
Touch Color Ring: Touch the color temperature/RGB color ring to select a color.
Mode/Speed: Short press to switch dynamic modes; long press to adjust speed;
Short press both “1” and “4” Zone keys simultaneously to cycle through dynamic modes.
Color Temperature: Short press to turn the current Zone’s color temperature channel on/off; touch the color ring to switch to the color temperature touch ring; Long press to adjust the brightness of the current color temperature.
RGB: Short press to turn the current Zone’s RGB channel on/off; touch the color ring to switch to the RGB touch ring;
Long press to adjust the brightness of the current color.
Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

Agba	R/G/B values
Uhie	R100%   G0%   B0%
Odo	R100%   G100%   B0%
Akwụkwọ ndụ akwụkwọ ndụ	R0%   G100%   B0%
Cyan	R0%   G100%   B100%
Acha anụnụ anụnụ	R0%   G0%   B100%
Purple	R100%   G0%   B100%
Ọcha	R100%   G100%   B100%

Ụdị dị ike	Red-purple gradient	Ọnọdụ kwụ ọtọ	Uhie
	Blue-purple gradient
	Color temperature gradient (warm yellow, cool white)		Akwụkwọ ndụ akwụkwọ ndụ
	Three-color gradient (RGB)
	Six-color gradient (red, green, blue, yellow, purple, cyan)		Acha anụnụ anụnụ
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Odo
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)		Purple
	Three-color gradient (RGB)		Cyan
	White gradually brightens and darkens		Mixed light white

Eserese waya

Used with P-series controllers

Njikọ koodu
Key pairing code

1. Short press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Multi-Zone remote control: Press and hold the Master Power button until the remote indicator flashes slowly. Press the desired Zone button until the load indicator flashes quickly and stays on and the color ring changes. Pairing complete.

Mara: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Clear Koodu
To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together
Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning.
   *Remote controls of the same model can learn from each other.

Clear Koodu
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Ọnọdụ ìhè egosi

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Mara: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Ụgbọ njem na Nchekwa

1. Ụgbọ njem
   Enwere ike ibupu ngwaahịa site na ụgbọ ala, ụgbọ mmiri na ụgbọ elu.
   N'oge njem, ngwaahịa kwesịrị ichebe site na mmiri ozuzo na anyanwụ. Biko zere ujo siri ike na ịma jijiji n'oge usoro nbudata na nbudata.
2. Nchekwa
   Ọnọdụ nchekwa ahụ kwesịrị ịgbaso ụkpụrụ Klas I Environmental Standards. A na-atụ aro ngwaahịa ndị echekwara ihe karịrị ọnwa isii ka enyochaghachi ya na enwere ike iji ya naanị mgbe ha tozuru oke.

Nlebara anya

• Biko jiri na gburugburu ime ụlọ kpọrọ nkụ;
• Mgbe ị na-etinye batrị, biko jikọọ ọnụ nke ọma na nke adịghị mma nke ọma. Ọ bụrụ na agaghị eji ebe nchekwa ahụ ogologo oge, wepụ batrị ahụ;
• Mgbe ebe dịpụrụ adịpụ dị mkpụmkpụ ma ma ọ bụ nke ime ime anaghị arụ ọrụ ugboro ugboro, biko gbanwee batrị n'oge;
• Biko buru ya nke ọma ma tinye ya ka ọ ghara ịdaba na-akpata mmebi;
• Ọ bụrụ na mmejọ mere, biko anwala idozi ngwaahịa n'onwe gị. Ọ bụrụ na ị nwere ajụjụ ọ bụla, biko kpọtụrụ ndị na-ebubata gị.
  ※ This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Akwụkwọ ikike akwụkwọ ikike

• Oge ikike site na ụbọchị nnyefe: afọ 5.
• A na-enye nrụzi ma ọ bụ ngbanwe efu maka nsogbu dị mma n'ime oge ikike.

Mwepu akwụkwọ ikike n'okpuru:

Ọnọdụ ndị a adịghị n'ime oke nkwa nke ịrụzi ma ọ bụ nnọchi ọrụ n'efu:

• Agafee oge ikike;
• Mmebi ọ bụla artificial kpatara site na elu voltage, ibufe ibu, ma ọ bụ arụmọrụ na-ekwesịghị ekwesị;
• Ngwaahịa nwere mmebi anụ ahụ siri ike;
• Mmebi nke ọdachi ndị na-emere onwe ha na ike majeure kpatara;
• Ebibiela akara akwụkwọ ikike na koodu mkpuchi.
• No any contract signed by our company.
  1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
  2. Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

Ịdọ aka ná ntị

• Ihe ize ndụ: Ngwaahịa a nwere batrị bọtịnụ ma ọ bụ mkpụrụ ego.
• Ọnwụ ma ọ bụ nnukwu mmerụ ahụ nwere ike ime ma ọ bụrụ na etinyere ya.
• Bọtịnụ cell ma ọ bụ batrị mkpụrụ ego iloro nwere ike ime ka ọkụ dị n'ime kemịkal n'ime ihe dịka awa 2.
• Chekwaa batrị ọhụrụ na nke eji eme ihe na-agaghị eru ụmụaka
• Chọọ nlekọta ahụike ozugbo ma ọ bụrụ na a na-enyo enyo ilo ma ọ bụ tinye batrị n'ime akụkụ ahụ ọ bụla.

a) Wepu ma megharịa ozugbo ma ọ bụ tụfuo batrị ndị eji arụ ọrụ dịka iwu mpaghara siri dị wee zere ụmụaka. Atụpụla batrị n'ime ahịhịa ụlọ ma ọ bụ gbaa ọkụ.
b) Ọbụna batrị ejiri mee ihe nwere ike ịkpata mmerụ ahụ ma ọ bụ ọnwụ.
c) Kpọọ ụlọ ọrụ na-ahụ maka nsi na mpaghara maka ozi ọgwụgwọ.
d) The compatible battery type: CR2032.
e) The nominal batrị voltage: 3Vdc.
f) A gaghị ebufe batrị ndị na-enweghị ike ịchaji.
g) Amanyela mwepu, fanye, kwasasịa, ikpo ọkụ n'elu (nkọwa okpomọkụ akọwapụtara nke onye nrụpụta) ma ọ bụ gbaa ọkụ. Ime otú ahụ nwere ike ịkpata mmerụ ahụ n'ihi ikuku, ntapu ma ọ bụ mgbawa na-ebute ọkụ ọkụ.
h) Gbaa mbọ hụ na etinyere batrị nke ọma dịka polarity (+ na -).
i) Ejikọtala batrị ochie na nke ọhụrụ, ụdị dị iche iche ma ọ bụ ụdị batrị, dị ka alkaline, carbon-zinc, ma ọ bụ batrị enwere ike ịchaji.
j) Wepu ma megharịa ozugbo ma ọ bụ tụfuo batrị site na akụrụngwa anaghị eji ogologo oge dịka iwu mpaghara siri dị.
k) Chebe akụkụ batrị ahụ kpamkpam. Ọ bụrụ na akụkụ batrị emechighị nke ọma, kwụsị iji ngwaahịa ahụ, wepụ batrị ndị ahụ, ma debe ya na ụmụaka.

Akwụkwọ / akụrụngwa

LTECH M1C Wireless Controller [pdf] Akwụkwọ ntuziaka M1C, M1D, M2C, M2D, M4C, 4D, M5C, M5D, 301, A3, M1C Wireless Controller, M1C, Wireless Controller, Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ