LTECH LED Controller (Single-zone)

The Mini Pro series LED remote control uses RF 2.4GHz wireless transmission technology, with a control distance (unobstructed) of up to 30 meters. When paired with the P-series controllers (P1/P2/P3/P4/P5), one controller is compatible with 5 outputs, supporting five types of lighting fixtures: DIM/CT/RGB/RGBW/RGBCW. One remote control can control numerous controllers within its effective range, enabling functions such as turning lights on/off, adjusting brightness, adjusting color temperature and RGB static colors, dynamic mode effects, and scene recall, meeting users’ needs for different lighting applications. For example, the dimming remote (M1A/M1B) has a quick brightness function, allowing one-button switching of brightness percentage; the color temperature remote (M2A/M2B) has a night light function, allowing one-button switching to low brightness; the RGBW remote (M4A/M4B) and RGBCW remote (M5A/M5B) can switch dynamic modes via mode buttons, or achieve a 9-mode loop effect via remote control combination keys.

Nka nka

Nlereanya	M1A	M1B	M2A	M2B	M4A	M4B	M5A	M5B
Agba	Ọcha	Nwa	Ọcha	Nwa	Ọcha	Nwa	Ọcha	Nwa
Ụdị nchapụta	DIM		CT		RGB/RGBW		RBCW
Ụdị ikuku	RF 2.4GHz
Vol na -arụ ọrụtage	3Vdc (Button battery CR2032×1)
Njikere ugbu a	2 XNUMXuA
Distance of the remote	30M (Under unobstructed conditions)
Ọnọdụ okpomọkụ na-arụ ọrụ.	-25 ℃ ~ 50 ℃
Ibu	40g± 10g
Akụkụ	104×58×9mm (remote)，108×63×14mm (remote+hold)

Akụkụ

Ntinye ngwaahịa

Two ways to fix the remote holder :

1. Dozie ihe njide dịpụrụ adịpụ na mgbidi na nkesa abụọ.
2. Jiri nrapado 3M dozie ihe njide dịpụrụ adịpụ na mgbidi.
   • Mara: Biko dọpụta taabụ batrị tupu ị were mbụ

Batrị nnọchi

1. Use a screwdriver to unscrew the bottom screw
2. Pull out the battery compartment and replace the battery

Ọrụ bọtịnụ

Dimming Remote Control M1A/M1B

• Power: Turns the light on or off. Brightness
• Touch Ring: Touch to change the light’s brightness.
• Brightness +/-: Adjusts the brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 4 Brightness Settings: 25%, 50%, 75%, 100% (4 brightness levels with shortcut keys).
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

Color Temperature Remote Control M2A/M2B

• Power: Turns the light on or off. Color Temperature Touch Ring: Touch to change the light’s color temperature.
• Night Light: Switches to low brightness, night light mode.
• Brightness +/-: Adjusts brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 3 Color Temperatures: Cool White, White Light, Warm Light; 3 color temperature shortcut keys.
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

RGB/RGBW Remote Control M4A/M4B

• Power: Turns the lights on or off.
• Touch Color Ring: Touch the RGB color ring to select a color.
• Mode/Speed: Short press to switch dynamic modes; long press to adjust speed. Short press both “R” and “W” keys simultaneously to cycle through dynamic modes.
• Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• Red/Green/Blue: Short-press to turn the static red/green/blue channels on or off. Long press for 1-6 seconds to continuously adjust the brightness of the current channel.
• White Light: For RGBW lights, short-press to turn the W channel on or off; long-press for 1-6 seconds to continuously adjust the W brightness.
• Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5A/M5B

• Power: Turns the lights on or off.
• Touch Color Ring: Select colors using the touch color temperature/RGB color ring.
• Mode/Speed: Short press to switch between dynamic modes; long press to adjust speed. Short press the “R” and ” “ keys simultaneously to cycle through dynamic modes.
• Color Temperature: Short press to turn the color temperature channel on or off; touch the color ring to switch to the color temperature touch ring. Long press for 1-6 seconds to continuously adjust the brightness of the current color temperature.
• RGB: Short-press to turn the RGB channel on or off; touch the color ring to switch to the RGB touch ring. Long-press for 1-6 seconds to continuously adjust the brightness of the current color.
• Red/Green/Blue: Short press to turn the static red/green/blue channel on or off. Long-press for 1-6 seconds to continuously adjust the brightness of the current channel.
• Scene: Short press to recall the scene; long press for 3 seconds to save the currentlighting state to the scene.

Agba	R/G/B values
Uhie	R100% G0% B0%
Odo	R100% G100% B0%
Akwụkwọ ndụ akwụkwọ ndụ	R0% G100% B0%
Cyan	R0% G100% B100%
Acha anụnụ anụnụ	R0% G0% B100%
Purple	R100% G0% B100%
Ọcha	R100% G100% B100%

Ụdị dị ike	Red-purple gradient	Ọnọdụ kwụ ọtọ	Uhie
	Blue-purple gradient
			Akwụkwọ ndụ akwụkwọ ndụ
	Color temperature gradient (warm yellow, cool white)
			Acha anụnụ anụnụ
	Three-color gradient (RGB)
	Six-colo  gradient (red, green, blue, yellow, purple, cyan)		Odo
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Purple
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)
			Cyan
	Three-color gradient (RGB)
			Mixed light white
	White gradually brightens and darkens

Used with P series controllers

Njikọ koodu

Key pairing code

1. Short-press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Mara: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Clear Koodu

To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together

Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning. *Remote controls of the same model can learn from each other.

Clear Koodu
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Ọnọdụ ìhè egosi

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.
  • Mara: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Ụgbọ njem na Nchekwa

1. Transportation Products can be shipped via vehicles, boats, and planes. During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading and unloading process.
2. Storage: The storage conditions should comply with the Class I Environmental Standards. The products that have been stored for more than six months are recommended to be re-inspected and can be used only after they have been qualified.

Nlebara anya

Please use in a dry indoor environment:

• When installing the battery. pleæeconnectthepositive and negative terminals correctly. Ifthe remote will not be used for along period, take the battery out.
• When the remote distance is shorten and or the remote dæsn’t work frequently, please change the battery in time.
• Please carefully take it and put it down to prevent falls that cause damage.
• please donotattemptto fix products by yourself. If you have any question please contact your suppliers
• Akwụkwọ ntuziaka a nwere ike ịgbanwe na-enweghị ọkwa ọzọ. Ọrụ ngwaahịa dabere na ngwaahịa. Biko nweere onwe gị ịkpọtụrụ ndị nkesa gọọmentị anyị ma ọ bụrụ na ị nwere ajụjụ ọ bụla.

Akwụkwọ ikike akwụkwọ ikike

• Oge ikike site na ụbọchị nnyefe: afọ 5
• Free repair or replacement serv’icæ for quality problems is provided within warranty periods. Warranty exclusions below:
• Ọnọdụ ndị a adịghị n'ime oke nkwa nke ịrụzi ma ọ bụ nnọchi ọrụ n'efu:

Beyond warranty periods:

• Mmebi ọ bụla artificial kpatara site na elu voltage. overload. or improper operations; Products with severe physical damage:
• Mmebi nke ọdachi ndị na-emere onwe ha na ike majeure kpatara;
• Ebibiela akara akwụkwọ ikike na koodu mkpuchi.
• No contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law
2. Our company has the right to amend or adjust the terms of this warranty. and release in written form shall prevail.

Ịdọ aka ná ntị

• Ihe ize ndụ: Ngwaahịa a nwere batrị bọtịnụ ma ọ bụ mkpụrụ ego.
• Ọnwụ ma ọ bụ nnukwu mmerụ ahụ nwere ike ime ma ọ bụrụ na etinyere ya.
• Bọtịnụ cell ma ọ bụ batrị mkpụrụ ego iloro nwere ike ime ka ọkụ dị n'ime kemịkal n'ime ihe dịka awa 2.
• Debe batrị ọhụrụ na nke eji eme ihe na-agaghị eru ụmụaka
• Chọọ nlekọta ahụike ozugbo ma ọ bụrụ na a na-enyo enyo ilo ma ọ bụ tinye batrị n'ime akụkụ ahụ ọ bụla
  • a) Wepu ma megharịa ozugbo ma ọ bụ tụfuo batrị ndị eji arụ ọrụ dịka iwu mpaghara siri dị wee zere ụmụaka. Atụpụla batrị n'ime ahịhịa ụlọ ma ọ bụ gbaa ọkụ.
  • b) Ọbụna batrị ejiri mee ihe nwere ike ịkpata mmerụ ahụ ma ọ bụ ọnwụ.
  • c) Kpọọ ụlọ ọrụ na-ahụ maka nsi na mpaghara maka ozi ọgwụgwọ.
  • d) The compatible battery type: CR2032.
  • e) The nominal batrị voltage: 3Vdc.
  • f) A gaghị ebufe batrị ndị na-enweghị ike ịchaji.
  • g) Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion, resulting in chemical burns.
  • h) Gbaa mbọ hụ na etinyere batrị nke ọma dịka polarity (+ na -).
  • i) Ejikọtala batrị ochie na nke ọhụrụ, ụdị dị iche iche ma ọ bụ ụdị batrị, dị ka alkaline, carbon-zinc, ma ọ bụ batrị enwere ike ịchaji.
  • j) Wepu ma megharịa ozugbo ma ọ bụ tụfuo batrị site na akụrụngwa anaghị eji ogologo oge dịka iwu mpaghara siri dị.
  • k) Chebe akụkụ batrị ahụ kpamkpam. Ọ bụrụ na akụkụ batrị emechighị nke ọma, kwụsị iji ngwaahịa ahụ, wepụ batrị ndị ahụ, ma debe ya na ụmụaka.

Akwụkwọ / akụrụngwa

LTECH LED Controller (Single-zone) [pdf] Ntuziaka onye ọrụ M1A, M1B, M2A, M2B, M4A, M4B, M5A, M5B, EX4S Single Zone RF-DMX RGBW Controller, EX4S, Single Zone RF-DMX RGBW Controller, RF-DMX RGBW Controller, RGBW Controller, Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ