Itron ACT2 Meter Module User Guide

Nwụnye ọkachamara
Ezubere modul a maka nrụnye ọkachamara site n'aka onye ntinye. Onye nrụpụta OEM ka na-ahụ maka nnabata FCC chọrọ nke ngwaahịa ikpeazụ, nke jikọtara modul a.

Mgbanwe na Mmezi
To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall not be changed or modified without the express written approval of Itron. Any unauthorized modification will void the user’s authority to operate the equipment. WARNING! This device contains no user serviceable parts. Attempts to repair this device by unauthorized personnel may subject the person to shock hazard if removal of protective covers is attempted. Unauthorized repair will void the warranty and/or maintenance contract with your company.

Nkọwa zuru oke
The Itron ACT2 is an electricity metering module which includes a 902.4 MHz to 927.6 MHz transmitter as well as WiFi.
The module operates on AC as well as DC voltage nke a na-enye ngwaọrụ nnabata.

Banyere akwụkwọ ntuziaka a
This technical reference guide describes the installation of the ACT2 for the Itron OPENWAY RIVA CENTRON meter.

Nwụnye

The ACT2 module will be installed in the Itron OPENWAY RIVA CENTRON electric meter.
Shown are the meter base with metrology board, the board to board connector, the ACT2 module, the display and the inner and outer cover.

Wụnye ihe ngosi na modul ACT2 site n'ịkwanye ntụtụ igwe ngosi n'ime njikọ modul.

Fanye modul n'ime akụkụ elu nke mkpuchi dị n'ime wee jikọọ njikọ wired abụọ na modul.

Jikọọ metrology na modul ACT2 site na iji bọọdụ gaa na njikọ osisi.

Wụnye mkpuchi dị n'ime ala.

Wụnye mkpuchi mpụta.

Ozi imegharị ihe

Ngwaahịa ị zụrụ nwere bọọdụ sekit. Na njedebe nke modul ndụ bara uru, n'okpuru iwu steeti na mpaghara dị iche iche, ọ nwere ike bụrụ iwu na-akwadoghị ka ị tụfuo ihe ụfọdụ n'ime usoro mkpofu obodo. Lelee ndị ọrụ mkpofu siri ike nke mpaghara gị maka nkọwa gbasara nhọrọ mwegharị ma ọ bụ mkpofu kwesịrị ekwesị.

Ịkpọ aha

The following requirements will be applied to any products that use this module:
The end product or host label will include the following text:

Nwere:

NJ FCC: SK9ACT2
IC: 864G-ACT2, Ụdị: ACT2

Akwụkwọ ntuziaka onye ọrụ maka ngwaahịa ọ bụla nwere modul a ga-enwe ederede na-esote. Ọ bụrụ na ngwaọrụ ahụ buru ibu, mgbe ahụ, a ga-etinyekwa nke a na label.

Nrube isi n'usoro

Akwụkwọ ntuziaka onye ọrụ maka ngwaahịa ọ bụla nwere modul a ga-enwe ederede na-esonụ:

FCC Nkeji 15, Klas B
A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta ojiji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

Megharịa ma ọ bụ bugharịa antenna nnata.
Mee ka nkewa dị n'etiti akụrụngwa na nnata.
Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Mgbanwe ma ọ bụ mgbanwe na ngwaọrụ a nke Itron, Inc. anabataghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ.

Innovation, Sayensị na mmepe akụ na ụba Canada (ISED)

Ngwa dijitalụ klaasị B a na-emezu ihe niile achọrọ nke iwu Canada na-akpata nnyonye anya akụrụngwa. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation, Science and Economic Development Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Ngosipụta RF (FCC/ISED)
“This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.”

Akụkọ ngbanwe

Tebụlụ na-esonụ na-akọwa mgbanwe nke akwụkwọ a maka ngbanwe ọ bụla nke modul ACT2:

Ndozigharị	Ụbọchị	Nkọwa nke Mgbanwe
A	Ọnwa Isii, 2018	Mwepụta mbụ

FAQ

What should I do if I encounter interference issues with the ACT2 Meter Module?

If interference occurs, ensure that the antenna type and gain are approved for use by regulatory authorities. Adjust the settings to minimize interference with other devices.

Can I modify or repair the ACT2 Meter Module myself?

The module is intended for professional installation by an integrator. Modifications or repairs not approved by Itron, Inc. may void the user's authority to operate the equipment.

Akwụkwọ / akụrụngwa

Itron ACT2 Meter Module [pdf] Ntuziaka onye ọrụ
SK9ACT2, ACT2, ACT2 Meter Module, Meter Module, Module

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Itron ACT2 Meter Module

Nkọwapụta

Dị iche iche