Mee-Shift Chick Brooder
nke peticoquin
Mee Shift Chick Brooder
M wuru brooder chick a ka m nọrọ n'ụlọ ụmụ ọkụkọ m dị otu izu.
E ji ihe dị iche iche m chọtara n’ebe a na-adọba ụgbọala na n’ụlọ anyị wuru ya. Enwere ike ibuli mkpuchi elu ma enwere ọnụ ụzọ. Ozugbo e wuchara ya, ejiri m akwa rọba kpuchie ya ka ọ dị mfe ihicha tupu agbakwunye akwa akwa. Ọ buru ibu maka ụmụ ọkụkọ 4, efere na-ekpo ọkụ, ụfọdụ ndị na-enye nri na-eme mgbanwe (iko 2 nke a na-etinye na ntọala osisi), ụlọ mgbatị ọhịa nke a na-eme n'ụlọ, yana ọtụtụ ohere. Ị nwere ike hazie nke a iji gboo mkpa gị.
Ngwunye:
- 1/4 "plywood gbara ọkpụrụkpụ maka isi na mgbidi azụ (mgbidi azụ nwekwara ike ịbụ akwa ngwaike).
- 8 ′ ogologo, 3/4 ″ x3/4 ″ okporo osisi iji kwado mgbidi akwa akwa
- 12 ft nke 3/4 ″ nnukwu x 3 1/2 ″ mbadamba osisi sara mbara iji wuo ala nke mgbidi na ọnụ ụzọ.
- Akwa ngwaike nwere oghere 1/4 inch maka mgbidi, ọnụ ụzọ na mkpuchi elu
- Maka mkpọchi ọnụ ụzọ: 1 ″ dayameta osisi dowel, 1 osisi (m na-eji ihe oriri na-esi na ya pụta), eriri roba, na nnukwu ihe nkedo nke buru ibu nke ga-adaba na dowel.
- Pịa ntụtụ ka itinye akwa ngwaike na nkuku akụkụ anọ
- Ejikọ akpa nri iji kee mgbidi akwa ngwaike na mkpuchi elu
- Ntu anọ 3 ″ maka aka ebu na ụfọdụ obere mbọ iji tinye iberibe osisi.
- Otu ụzọ hinges maka ọnụ ụzọ
- Otu ụzọ nke ngwaike akwa cutters
- Otu hama
- Ụfọdụ gluu
Nzọụkwụ 1: Na-akwadebe Ngwa
Bee otu 1/4 "plywood gbara ọkpụrụkpụ 24"x33" maka oor Bee atọ 3/4" nnukwu site na 3 1/2" obosara site na 33" mbadamba ogologo maka isi nke oor
Bee ihe abụọ 3/4 "oke site na 3 1/2" n'obosara site na 33" ogologo mbadamba maka ala ọnụ ụzọ
Bee 33 ″ ogologo x 14 ″ ogologo 1/4 ″ plywood maka mgbidi azụ
Bee osisi anọ 3/4 ″ x 3/4″ site na 17″ ogologo
Bee 1 ″ na dayameta dowel osisi ruo 29 1/2 ″ ogologo
Bee akwa ngwaike abụọ 22 "x16" nwere oghere 1/4" maka mgbidi akụkụ.
Bee akwa ngwaike 33 "x32" na oghere 1/4" square maka mkpuchi elu.
Bee 12 "x33" akwa ngwaike nwere oghere 1/4" maka akụkụ ọnụ ụzọ
Kwụpụ 2: Tinye akwụkwọ nkuku kwụ ọtọ na ntọala
Iji obere mbọ na hama, tinye ogwe osisi 3/4 "x3/4" n'akụkụ akụkụ nke 24 "x33" plywood.
Kwụpụ 3: Tinye bọọdụ ntọala na Plywood Base
Gwakọta nke ọ bụla n'ime bọọdụ ntọala 4 na ntọala plywood.
Mgbe gluu akpọnwụwo, kpọkọta akụkụ anọ nke mbadamba ntọala ọnụ.
Kwụpụ 4: Tinye mgbidi azụ
Iji obere mbọ tinye plywood ogologo 33 ″ ogologo x 14 ″ ogologo na ogwe osisi abụọ 3/4″ x3/4 ″ iji mepụta mgbidi azụ. Ị nwere ike iji akwa ngwaike maka mgbidi a mana m dị mkpụmkpụ na akwa ngwaike ma nweekwa plywood ọzọ.
Nzọụkwụ 5: Kpọkọta ọnụ ụzọ
Tinye osisi 3/4 inch ikpeazụ x 3 1/2 ″ ogologo x 33 ″ osisi osisi na mgbidi dị n'akụkụ mgbidi azụ site na iji hinges (dị ka egosiri na foto mbụ).
Tinye ihe nrụnye ngwaike na bọọdụ osisi site na iji ntụtụ push (jiri hama tinye ntụtụ).
Tinye 1 ″ dowel osisi nke dị 29 1/2 ″ ogologo n'elu akwa ngwaike site na iji pin pin iji mezue mgbakọ ọnụ ụzọ ahụ.
Foto ikpeazụ na-egosi ọnụ ụzọ na ọnọdụ mepere emepe.
Kwụpụ 6: Tinye mgbidi akụkụ na mkpuchi elu
N'iji ntụtụ ntanye na hama, tinye akwa ngwaike dị ogologo x 22 ″ ogologo x 16 ″ na mkpanaka osisi.
Jikọọ mgbidi dị n'akụkụ na mkpuchi elu site na iji eriri akpa nri.
Kwụpụ 7: Wuo Mkpọchi n'ọnụ ụzọ
Jiri obere ihe nkedo buru ibu ka ị kechie na dowel ọnụ ụzọ dị ka egosiri na foto a. Fanye nsọtụ ọ bụla nke gbutu osisi ma ọ bụ osisi yiri ya site na oghere abụọ nke mkpuchi elu. Kpọọ nnukwu eriri rọba site na aka nke mkpachị ihe nkedo wee kụchie nsọtụ nke ọzọ nke eriri rọba n'akụkụ ebe dị anya nke chopstick ahụ. Nke a bụ ọnọdụ mkpọchi.
Ka imepee ụzọ, dị nnọọ wepụ roba band na chopstick na mpịaji ọnụ ụzọ ala.
Kwụpụ 8: Tinye aka na-ebu
Hama 4 nnukwu mbọ n'akụkụ anọ nke brooder dị ka e gosipụtara. Aka ndị a batara nke ọma ka ha na-ekwe ka mmadụ 2 (otu n'akụkụ ọ bụla nke brooder) buru brooder.
Ime-Shift Chick Brooder:
Akwụkwọ / akụrụngwa
 |
instructables Mee Shift Chick Brooder [pdf] Akwụkwọ ntuziaka Mee Shift Chick Brooder, Chick Brooder, Brooder |
