eSSL TL200 Mkpọchi mkpịsị aka mkpịsị aka na njirimara ntuziaka olu

Tupu echichi

Ndepụta nkwakọ ihe

Nkwadebe ọnụ ụzọ

1. Lelee nha ọnụ ụzọ, dozie skru na spindles kwesịrị ekwesị.
   

   Ọkpụrụkpụ ọnụ ụzọ	D Spindle	L Spindle	J Ịghasa	K Ịghasa
   35-50 mm	85 mm	60 mm	30 mm	45 mm
   50-60 mm			45 mm	55 mm
   55-65 mm				60 mm
   65-75 mm	105 mm	85 mm	55 mm	70 mm
   75-90 mm	125mm		70 mm	85 mm

2. Lelee ụzọ mepere emepe.
   Mara: 1. Biko tinye mortise na tie efere dị ka foto ndị dị n'elu si dị.
3. Lelee ụdị ọnụ ụzọ.
   A na-etinye Mortise na-enweghị nko n'ọnụ ụzọ osisi, a na-etinyekwa mortise na nko na ọnụ ụzọ nchekwa.

Ndụmọdụ

1. Kedu ka esi agbanwe ntụzịaka nke bolt latch?
   Nzọụkwụ 1: Pịa mgba ọkụ na njedebe
   Nzọụkwụ 2: Tinye ihe mgbochi ahụ n'ime mortise
   Nzọụkwụ 3: Tụgharịa ihe mgbochi ahụ na 180 ° n'ime mortise, wee hapụ ya.
2. Kedu ka esi agbanwe ntụzịaka aka?
3. Kedu ka esi eji igodo igwe arụ ọrụ?
4. Kedu otu esi eji ike mberede?
5. Olee otú ịgbanwe ebe nke stud bolts?
   1. Nzọụkwụ 1: Tụgharịa ala iri M3 skru na M5 stud bolt ka iwetuo efere mgbago.
      Mara: Maka ọnụ ụzọ nwere oghere ndị dị adị, ị nwere ike ịhazigharị stud bolts ebe ka mkpọchi ahụ dabara adaba.
   2. Nzọụkwụ 2: Tụgharịa bolt stud nke ọzọ.
      Mara: Enwere oghere square anọ a ga-eji.
      Mara: Enwere oghere okirikiri abụọ a ga-eji.

Ịdọ aka ná ntị

1. Ahaziri mkpọchi ọhụrụ iji nye ohere ọ bụla akara mkpịsị aka imeghe.
2. Biko debanye aha otu onye nchịkwa opekata mpe maka mkpọchi arụnyere ọhụrụ, Ọ bụrụ na enweghị onye nchịkwa, anabataghị ndebanye aha maka ndị ọrụ nkịtị na ndị ọrụ nwa oge.
3. Ejiri igodo igwe arụ ọrụ maka imeghe akwụkwọ ntuziaka. Wepu igodo igwe na ngwugwu ma debe ha n'ebe nchekwa.
4. Iji gbanye ọkụ na mkpọchi, achọrọ batrị AA alkaline asatọ (anaghị etinye ya).
   A naghị atụ aro batrị ndị na-abụghị alkaline na nke enwere ike ịchaji.
5. Ewepụla batrị mgbe mkpọchi nọ n'ọnọdụ ọrụ.
6. Biko dochie batrị n'oge adịghị anya mgbe mkpọchi kpaliri olu batrị dị ala.
7. Arụmọrụ nke ịtọ mkpọchi nwere oke ndoro-ndoro nke 7 sekọnd. Enweghị ọrụ ọ bụla, mkpọchi ga-agbanyụ na-akpaghị aka.
8. Debe mkpịsị aka gị ọcha mgbe ị na-eji mkpọchi a.

Nwụnye

Gwuo oghere n'ọnụ ụzọ

Rịba ama1:Hazie ndebiri n'akụkụ ahịrị etiti kwụ ọtọ nke mortise(E) n'ogo aka achọrọ, wee techie ya n'ọnụ ụzọ.
Rịba ama2:Kanye akara n'oghere ndị ahụ na mbụ, wee malite igwu mmiri.

Wụnye mortise (E)

Wụnye n'èzí unit (B) na gasket (C), na spindle (D)

Mara:

1. Ekwesịrị idowe obere triangle ahụ n'akụkụ mkpụrụedemede nke R ma ọ bụ L.
2. Mgbe obere triangle chere ihu na R, ọ na-emeghe nke ọma.
3. Mgbe obere triangle ahụ chere ihu na L, a na-ahapụ ya ka oghe.
4. Wụnye efere arịọnụ (I) nwere gasket (C), na spindle (L)
5. Wụnye nkeji ime ụlọ (M)
6. Wụnye batrị (O)
   Mara: Tinye eriri n'ime oghere.
   1. Nzọụkwụ 1:Tinye mkpuchi batrị n'ọnọdụ dị ka foto dị n'elu gosiri, wee pịa ya nwayọ.
   2. Nzọụkwụ 2:Na-agbada mkpuchi batrị.
7. Kaa akara ma gwuo oghere maka iku
8. Nwaa mkpọchi site na igodo igwe (A) ma ọ bụ akara mkpisiaka
   Ntuziaka igodo igwe:
   1. A na-eji agba ọla kpuchie igodo A, nke a na-eji naanị maka nrụnye mkpọchi na ihe ndozi.
   2. A na-akwakọba igodo B n'ime ihe mkpuchi plastik mechiri emechi maka nchekwa, nke a na-eji maka onye nwe ụlọ.
   3. Ozugbo ejiri igodo B, igodo A ga-enwe nkwarụ imeghe mkpọchi.

#24, Ụlọ Shambavi, 23rd Main, Marenahalli, JP Nagar Nkeji nke abụọ, Bengaluru - 2 Ekwentị: 560078-91 | Email: sales@esslsecurity.com
www.esslsecurity.com

Akwụkwọ / akụrụngwa

eSSL TL200 Mkpọchi mkpịsị aka mkpịsị aka na njirimara ntuziaka olu [pdf] Akwụkwọ ntuziaka TL200, Mkpọchi mkpịsị aka mkpịsị aka na njirimara ntuziaka olu, Mkpọchi mkpịsị aka mkpịsị aka

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ