Akwụkwọ ntuziaka onye ọrụ
Nọmba ngwaahịa: TNS-1126
Nọmba ụdị: A.0

Okwu mmalite:

Onye njikwa bụ ihe njikwa ọtụtụ ọrụ Bluetooth nwere ọnọdụ ntinye NS + gam akporo + PC. Ọ nwere ọdịdị mara mma na njide dị mma ma bụrụ nke a ga-enwerịrị maka ndị egwuregwu.

Eserese ngwaahịa:

Njirimara ngwaahịa:

1. Kwado njikọ ikuku Bluetooth na NS console na ikpo okwu ekwentị gam akporo.
2. Nkwado wired njikọ nke data USB na NS console, Android ekwentị, na PC.
3. Emebere ọrụ ntọala Turbo, bọtịnụ igwefoto, ntinye ike ndọda gyroscope, ịma jijiji moto, na ọrụ ndị ọzọ.
4. Enwere ike iji batrị lithium dị elu 400mAh 3.7V arụnyere maka chaja cyclic.
5. Ngwaahịa a nakweere imewe ụdị-C interface, nke enwere ike ịgba ụgwọ site na iji ihe nkwụnye NS mbụ ma ọ bụ ihe nkwụnye ọkọlọtọ PD.
6. Ngwaahịa ahụ nwere ọdịdị mara mma na njide dị mma.

Eserese ọrụ:

Aha ọrụ	Dị ma ọ bụ na ọ bụghị	Okwu
Njikọ eriri USB	Ee
Njikọ Bluetooth	Nkwado
Ụdị njikọ	NS/PC/Android Mode
Ọrụ ịkpọte njikwa	Nkwado
Nhụta ike ndọda-axis	Ee
Igodo, Igodo B, X Key, Y Key, Key, Key, Key Key, Key ZL, Key ZR, Key Home, Cross Key, TuBRO Key	Ee
Igodo nseta ihuenyo	Ee
3D joystick (ọrụ ọ joystick 3D aka ekpe)	Ee
Igodo L3 (ọrụ ọpịpị joystick 3D aka ekpe)	Ee
Igodo R3 (ọrụ ọpịpị joystick aka nri 3D)	Ee
Ngosi njikọ	Ee
moto ịma jijiji ọrụ mmezi	Ee
Ọrụ ọgụgụ NFC	Mba
Nkwalite njikwa	Nkwado

Nkọwa nke Ụdị na Njikọ Njikọ:

1. Ụdị NS:
   Pịa igodo ụlọ maka ihe dịka sekọnd 2 ka ịbanye ọnọdụ ọchụchọ Bluetooth. Ihe ngosi LED na-enwu site na ọkụ "1-4-1". Mgbe njikọ na-aga nke ọma, akara ngosi ọwa kwekọrọ na-akwụsị. Onye njikwa ahụ nọ na ọnọdụ mmekọrịta ma ọ bụ na-ejikọta ya na njikwa NS: Ihe ngosi LED na-enwu site na "1-4-1".
2. Ụdị Android:
   Pịa igodo Ụlọ ihe dịka sekọnd 2 ka ịbanye ọnọdụ ọchụchọ Bluetooth. Mgbe njikọ nke ọma gasịrị, ihe ngosi LED ga-enwu site na ọkụ "1-4-1".

Mara: Mgbe onye njikwa banye na ọnọdụ njikọ mmekọrịta, Bluetooth ga-arahụ ụra na-akpaghị aka ma ọ bụrụ na ejikọtaghị ya nke ọma n'ime nkeji 3. Ọ bụrụ na njikọ Bluetooth na-aga nke ọma, ihe ngosi LED na-aga n'ihu (ihe njikwa na-ekenye ọkụ ọwa).

Ntuziaka mmalite na ọnọdụ jikọọ akpaaka:

1. Pịa ma jide igodo ụlọ maka sekọnd 5 ka ịgbanwuo; Pịa ma jide igodo ụlọ maka sekọnd 5 ka mechie.
2. Pịa igodo Ụlọ ka ịkpọte njikwa maka sekọnd 2. Mgbe akpọlitechara ya, ọ ga-ejikọ ya na console ejikọtara na mbụ. Ọ bụrụ na njikọ ọzọ ahụ daa n'ime sekọnd 20, ọ ga-ehi ụra na-akpaghị aka.
3. Igodo ndị ọzọ enweghị ọrụ ịkpọte.
4. Ọ bụrụ na njikọta akpaaka adaghị, ị ga-ejikọkwa njikọ ahụ.

Mara: Emetụla joysticks ma ọ bụ igodo ndị ọzọ aka mgbe ị na-amalite. Nke a na-egbochi mmezi akpaka. Ọ bụrụ na joysticks na-apụ apụ n'oge eji, biko gbanyụọ njikwa wee malitegharịa ya. Na ọnọdụ NS, ịnwere ike iji menu “Ntọala” na njikwa wee nwaa “Joystick Calibration” ọzọ.

Ngosipụta chajị na njirimara chaja:

1. Mgbe agbanyụrụ njikwa ahụ wee chajịa: Ihe ngosi LED “1-4” ga-eji nwayọ na-enwu, na ọkụ LED ga-adagide mgbe chajịrị ya.
2. Mgbe ejiri Bluetooth jikọọ njikwa NS na njikwa NS wee kwụọ ụgwọ: ihe ngosi LED nke ọwa ejikọrọ ugbu a na-enwu nwayọ nwayọ, ihe ngosi LED na-akwụkwa ọtọ mgbe chajịrị njikwa zuru oke.
3. Mgbe ejiri Bluetooth jikọọ njikwa na ekwentị gam akporo wee chajịa: ihe ngosi LED nke ọwa ejikọrọ ugbu a na-enwu nwayọ nwayọ, ihe ngosi ọwa na-aga n'ihu mgbe chajịrị ya.
4. Mgbe njikwa na-na-na-na-na-na-na-na-njikọ njikọ, akpaaka re-njikọ, obere ike mkpu ala, LED egosi pairing njikọ na tie-azụ njikọ ka mma.
5. Ụdị-C USB ntinye nchaji voltage: 5V DC, ntinye ugbu a: 300mA.

Ụra akpaaka:

1. Jikọọ na ọnọdụ NS:
   Ọ bụrụ na ihuenyo NS console mechie ma ọ bụ gbanyụọ, onye njikwa na-akwụsị na-akpaghị aka wee banye n'ụba.
2. Jikọọ na ụdị Android:
   Ọ bụrụ na ekwentị gam akporo kwụsịrị Bluetooth ma ọ bụ gbanyụọ, onye njikwa ga-akwụsị ozugbo wee hie ụra.
3. Ụdị njikọ Bluetooth:
   Mgbe ịpịrị igodo ụlọ maka sekọnd ise, njikọ Bluetooth kwụsịrị wee banye n'ụra.
4. Ọ bụrụ na ejighị igodo ọ bụla pịa onye njikwa ahụ n'ime nkeji ise, ọ ga-arahụ ụra ozugbo (gụnyere nghọta ndọda).

Oti mkpu batrị dị ala:

1. Oti mkpu batrị dị ala: Ihe ngosi LED na-enwu ngwa ngwa.
2. Mgbe batrị dị ala, chaja onye njikwa n'oge.

Ọrụ Turbo (ntọala gbawara):

1. Pịa ma jide igodo ọ bụla nke A, B, X, Y, L1, L2, R1, R2, wee pịa igodo Turbo ka ịbanye ọrụ Turbo (gbawara).
2. Pịa ma jide igodo ọ bụla nke A, B, X, Y, L1, L2, R1, R2 ọzọ, wee pịa igodo Turbo iji kpochapụ ọrụ Turbo.
3. Enweghị ihe ngosi LED maka ọrụ Turbo.
4. Ndozi ngwa ngwa Turbo:
   Pịa ma jide igodo Turbo wee pịa joystick 3D aka nri elu. Ọsọ Turbo na-agbanwe: 5Hz-> 12Hz-> 20Hz.
   Pịa ma jide igodo Turbo wee pịa joystick 3D aka nri ala. The Turbo ọsọ mgbanwe: 20Hz-> 12Hz-> 5Hz.
   Mara: ọsọ turbo ndabara bụ 20Hz.
5. Ndozi ike ịma jijiji:
   Pịa ma jide igodo Turbo wee pịa joystick aka ekpe 3D elu, ike ịma jijiji na-agbanwe: 0 % -> 30 % -> 70% -> 100%. Pịa ma jide igodo Turbo wee pịa joystick aka ekpe 3D, ike ịma jijiji na-agbanwe: 100% -> 70% -> 30% -> 0.
   Mara: Ike ịma jijiji nke ndabara bụ 100%.

Ọrụ nseta ihuenyo:

Ọnọdụ NS: Mgbe ị pịa igodo nseta ihuenyo, a ga-echekwa ihuenyo NS console ka ọ bụrụ foto.

1. Igodo nseta ihuenyo adịghị na PC na gam akporo.
2. Ọrụ Njikọ USB:
3. Kwado njikọ eriri USB na ọnọdụ NS na PC XINPUT.
4. A na-achọpụta ọnọdụ NS na-akpaghị aka mgbe ị na-ejikọta na njikwa NS.
5. Ọnọdụ njikọ bụ ọnọdụ XINPUT na PC.
6. USB LED egosi:
   Ọnọdụ NS: Mgbe njikọ nke ọma gasịrị, ihe ngosi ọwa nke NS console na-agbanye na-akpaghị aka.
   Ọnọdụ XINPUT: ihe ngosi LED na-enwu mgbe njikọ gara nke ọma.

Tọgharịa Ọrụ Ngbanwe:
Ngbanwe nrụpụta dị na pinhole dị na ala nke njikwa. Ọ bụrụ na njikwa ahụ dara, ịnwere ike itinye agịga dị mma n'ime pinhole wee pịa ngbanwe nrụpụta, enwere ike mechie njikwa ahụ n'ike.

Ọnọdụ gburugburu ebe obibi na parampat eletriki:

Ihe	Ngosipụta teknụzụ	Nkeji	Okwu
Ọnọdụ okpomọkụ na-arụ ọrụ	-20-40	℃
Ọnọdụ nchekwa	-40-70	℃
Usoro ikposa ọkụ	Ikuku okike

1. Ike batrị: 400mAh
2. Ịchaji ugbu a: ≤300mA
3. Nchaji voltagihe: 5V
4. Kachasị arụ ọrụ ugbu a:≤80mA
5. Static na-arụ ọrụ ugbu a:≤10uA

Nlebara anya:

1. Ejila ihe nkwụnye ọkụ USB tinye ike karịa 5.3V.
2. Ekwesịrị ịchekwa ngwaahịa a nke ọma mgbe anaghị eji ya.
3. Enweghị ike iji ngwaahịa a ma chekwaa ya na gburugburu iru mmiri.
4. Ekwesịrị iji ma ọ bụ chekwaa ngwaahịa a site na ịzere uzuzu na ibu dị arọ iji kwe nkwa ndụ ọrụ ya.
5. Biko ejikwala ngwaahịa etinyere, gwepịara ọnụ, ma ọ bụ gbajiri agbaji yana nsogbu arụ ọrụ eletrik kpatara site na iji na-ezighi ezi.
6. Ejila akụrụngwa kpo oku dị n'èzí dị ka oven microwave maka ihicha.
7. Ọ bụrụ na ọ mebiri emebi, biko ziga ya na ngalaba nlekọta maka mkpofu. Achịkọtala ya n'onwe gị.
8. Ụmụaka biko jiri ngwaahịa a nke ọma n'okpuru nduzi nke nne na nna. Ekwela ka egwuregwu na-agwụ gị ike.
9. N'ihi na sistemụ Android bụ ikpo okwu mepere emepe, ụkpụrụ nhazi nke ndị na-emepụta egwuregwu dị iche iche adịghị n'otu, nke ga-eme ka onye njikwa enweghị ike iji egwuregwu niile. Ndo maka nke ahụ.

Nkwupụta FCC
Mgbanwe ma ọ bụ mgbanwe ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.
A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta ojiji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka

Ngwaọrụ a na-akwado akụkụ 15 nke iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a (1) ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị. Ngwa a na-akwado oke ikpughe radieshon FCC nke edobere maka gburugburu ebe anaghị achịkwa ya.

Akwụkwọ / akụrụngwa

DOBE TNS-1126 Bluetooth Multi-Function Controller [pdf] Akwụkwọ ntuziaka onye ọrụ TNS-1126, TNS1126, 2AJJCTNS-1126, 2AJJCTNS1126, Bluetooth Multi-Function Controller, TNS-1126 Bluetooth Multi-Function Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ