ọdịnaya zoo
1 CISCO Secure Network Analytics Data Store
2 Ozi ngwaahịa
3 Aha patch na nha
4 Nkọwa kwachie
5 Tupu Ị Malite
6 Nkọwapụta
7 Budata na nwụnye
8 Nwụnye
9 FAQ
10 Akwụkwọ / akụrụngwa
10.1 Ntụaka

CISCO-akara ngosi

CISCO Secure Network Analytics Data Store

CISCO-Secure-Network-Analytics-Data-Store-product

Ozi ngwaahịa

Nkọwapụta

  • Product Name: Data Store Update Patch for Cisco Secure Network Analytics (formerly Stealthwatch) v7.5.3
  • Patch Name: update-dnode-ROLLUP20251106-7.5.3v2-01.swu
  • Patch Size: Increased SWU file nha
  • Includes: Security fixes and previous fixes

Data Store Update Patch for Cisco Secure Network Analytics (formerly Stealthwatch) v7.5.3
This document provides the patch description and installation procedure for the Cisco Secure Network Analytics Data Store appliance v7.5.3.

Make sure you read the Before You Begin section before you get started.

Aha patch na nha

  • Aha: We changed the patch name so that it starts with “update” instead of “patch.” The name for this rollup is update-dnode-ROLLUP20251106-7.5.3-v2-01.swu.
  • Nha: We increased the size of the patch SWU files. Nke files may take a longer time to download. Also, follow the instructions in the Lelee oghere diski dị section to confirm you have enough available disk space with the new file nha.

Nkọwa kwachie

This patch, update-dnode-ROLLUP20251106-7.5.3-v2-01.swu, includes security fixes.

Previous fixes included in this patch are described in Ndozi gara aga.

Tupu Ị Malite

Gbaa mbọ hụ na ị nwere ohere zuru oke na njikwa maka ngwa SWU niile filenke ị na-ebugote na Onye njikwa Nwelite. Ọzọkwa, gosi na ị nwere ohere zuru oke na ngwa onye ọ bụla.

Lelee oghere diski dị

  1. Banye na interface Admin Ngwa.
  2. Pịa Ụlọ.
  3. Chọta ebe ahụ Ojiji diski ngalaba.
  4. Review nke Available (byte) column and confirm that you have the required disk space available on the /lancope/var/ nkebi.

Ihe achọrọ

  • Ihe achọrọ: Na ngwa ọ bụla a na-achịkwa, ị ga-achọ opekata mpe okpukpu anọ karịa mmelite ngwanrọ nke ọ bụla file (SWU) dị. Na njikwa, ị chọrọ ma ọ dịkarịa ala ugboro anọ nha nke ngwa SWU niile filenke ị na-ebugote na Onye njikwa Nwelite.
  • Ngwa ejiziri ahazi: Maka example, ma ọ bụrụ na Flow Collector SWU file is 6 GB, you need at least 24 GB available on the Flow Collector (/lancope/var) partition (1 SWU file x 6 GB x 4 = 24 GB dị).
  • Onye njikwa: Maka example, ọ bụrụ na ị bulite SWU anọ files to the Manager that are each 6 GB, you need at least 96 GB available on the /lancope/var partition (4 SWU filesx 6 GB x 4 = 96 GB dị).

Nkọwapụta

Ngwa Patch File Nha
Onye njikwa 6.07 GB
Onye na-anakọta Flow NetFlow 3.02 GB
Flow Collector sFlow 3.02 GB
Ebe nchekwa data mkpokọta 2.15 GB
Ihe Nnọọ Ọgwụ 3.13 GB
Onye isi UDP 2.01 GB
Ụlọ ahịa data 2.10 GB

Budata na nwụnye

Starting with v7.5.1, the following two options are available for downloading software:

  • Budata akwụkwọ ntuziaka: Budata ngwanrọ site na Cisco Software Central and upload it to your Update Manager.
  • Direct Software Downloads (Beta): Register with your cisco.com user ID (CCOID) and download software directly to your Update Manager.

Nbudata akwụkwọ ntuziaka

  1. Banye na Cisco Software Central, https://software.cisco.com.
  2. In the Download and Upgrade area, choose Nweta nbudata.
  3. Ụdị Nyocha netwọkụ echekwara n'ime Họrọ ngwaahịa igbe ọchụchọ.
  4. Họrọ ụdị ngwa ngwa site na ndetu ndọpụta, wee pịa Banye.
  5. N'okpuru Select a Software Type, họrọ Ntụle nyocha netwọkụ echekwara.
  6. Họrọ 7.5.3 site na mpaghara mwepụta kacha ọhụrụ iji chọta patch ahụ.
  7. Budata mmelite kwachie file, update-dnode-ROLLUP20251106-7.5.3-v2-01.swu, and save it to your preferred location.

Direct Software Downloads (Beta)
To use this Beta integration and download software and patch update files directly to your Update Manager, complete the following steps:

You will need to register with your cisco.com user ID (CCOID) before you can start using Direct Software Downloads. If you have already registered, you can skip to 3. View and Download Updates.

  1. Open Update Manager
    1. Banye na Onye njikwa.
    2. From the main menu, choose Configure > Global > Central Management.
    3. Pịa taabụ njikwa mmelite.
  2. Register for Direct Software Downloads
    If you have already registered, skip to 3. View and Download Updates.
    1. Click the Direct Software Downloads link to open the registration page.CISCO-Secure-Network-Analytics-Data-Store- (1)
    2. Click the Register button to begin the registration process.CISCO-Secure-Network-Analytics-Data-Store- (2)
    3. Click the link that is provided.CISCO-Secure-Network-Analytics-Data-Store- (3)
    4. You will be taken to the Activate Your Device page. Click Next to continue.
    5. Banye na nke gị cisco.com user ID (CCOID).
    6. You will receive a “Device Activated” message once your activation is complete.CISCO-Secure-Network-Analytics-Data-Store- (4)
    7. Go back to the Direct Software Downloads page on your Manager and click Continue.
    8. Click the links for the EULA and K9 agreements to read and accept the terms. Once the terms are accepted, click Continue.CISCO-Secure-Network-Analytics-Data-Store- (5)
  3. View and Download Updates
    1. Click the Check for Updates button to check for any available updates.CISCO-Secure-Network-Analytics-Data-Store- (6)
    2. Click the PREVIOUS RELEASES link to view and download previous patches and updates.
    3. To download an update or patch click the Download All button. Once the download is complete, you will be given the option to return to the Update Manager to continue the update process. Click the Go to Update Manager button to continue the update process.CISCO-Secure-Network-Analytics-Data-Store- (7)

Nwụnye

Ka ịwụnye mmelite kwachie file, mezue usoro ndị a:

  1. Banye na Onye njikwa.
  2. From the main menu, choose Configure > Global > Central Management.
  3. Pịa taabụ njikwa mmelite.
  4. Na ibe njikwa Nwelite, pịa Bulite, wee mepee nkwalite kwachie echekwara file, update-dnode-ROLLUP20251106-7.5.3-v2-01.swu.
  5. Na kọlụm omume, pịa akara ngosi (Ellipsis) maka ngwa, wee họrọ Wụnye Mmelite.

Ihe nkedo ahụ malitegharịa ngwa ngwa.

Ndozi gara aga
Ihe ndị a bụ ndozi ntụpọ gara aga gụnyere na patch a:

Mkpokọta 20250930

CDETS Description

  • CSCwr64349
    Amaghi ama files are created in catalogue directory during VBR restoration when FIPS or CC mode is enabled
  • CSCwq44396
    Internode broadcast encryption and Data Store expansion fail after adding a Data Store node with Private LAN Encryption enabled

Nkwado kọntaktị
Ọ bụrụ na ịchọrọ nkwado teknụzụ, biko mee otu n'ime ihe ndị a:

Ozi nwebisiinka
Cisco na akara Cisco bụ ụghalaahịa ma ọ bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Cisco na/ma ọ bụ ndị mmekọ ya na US na obodo ndị ọzọ. Iji view ndepụta nke Cisco ụghalaahia, gaa na nke a URL: https://www.cisco.com/go/trademarks. Ighalaahia nke ndị ọzọ akpọrọ aha bụ ihe onwunwe nke ndị nwe ha. Ojiji okwu onye mmekọ anaghị egosi mmekọrịta mmekọrịta dị n'etiti Cisco na ụlọ ọrụ ọ bụla ọzọ. (1721R)

© 2025 Cisco Systems, Inc. na/ma ọ bụ ndị mmekọ ya. Ikike niile echekwabara.

FAQ

What is the patch name for this update?

The patch name for this update is update-dnode-ROLLUP20251106-7.5.3v2-01.swu.

Akwụkwọ / akụrụngwa

CISCO Secure Network Analytics Data Store [pdf] Akwụkwọ ntuziaka onye ọrụ
Secure Network Analytics Data Store, Network Analytics Data Store, Analytics Data Store, Data Store

Ntụaka

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *