Manufacturer of professional digital measurement instruments including environmental testers, gas detectors, ultrasonic thickness gauges, and analytical tools.
Ihe mmetụta uche specializes in the development and manufacturing of precision electronic measurement instruments. Their diverse catalog supports professionals across industrial, environmental, and safety sectors.
Otu isi ngwaahịa gụnyere:
SMART SENSOR instruments are designed for reliability and ease of use, featuring digital displays and rugged casings suitable for fieldwork.
Akwụkwọ ntuziaka kacha ọhụrụ si manuals+ kwadoro maka ika a.
Lelee vidiyo nhazi, nrụnye, na nchọpụta nsogbu maka ika a.
Ajụjụ a na-ajụkarị gbasara akwụkwọ ntuziaka, ndebanye aha na nkwado maka ika a.
To change units (e.g., m/s to mph), press and hold the 'MODE' button for about 3 seconds until the unit blinks, then press 'SET' to cycle through the available units. Press 'MODE' again to confirm.
The device supports standard acoustic calibration. Typically, this involves inserting the microphone into a standard sound calibrator (e.g., 94dB at 1kHz) and using the designated calibration potentiometer or button combination to adjust the reading to match the reference source.
The coupling indicator confirms that the transducer has made good contact with the material surface. If the coupling icon does not appear or is unstable, check that sufficient couplant (gel/oil) is applied and that the surface is clean/smooth.
SMART SENSOR produces various detectors for specific gases, including Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Oxygen (O2), and combustible gases (LEL). Always check your specific model's manual (e.g., ST8904 or AS8800C) to verify which gases it detects.