Autonics TC Series TC4Y-N4R Otu Ngosipụta PID ntuziaka ntuziaka ndị na-ahụ maka okpomọkụ.

Gụọ ma ghọta akwụkwọ ntuziaka na ntuziaka nke ọma tupu iji ngwaahịa a.

Maka nchekwa gị, gụọ ma soro atụmatụ nchekwa ndị a tupu i jiri ya.

Maka nchekwa gị, gụọ ma soro echiche ndị edere n'akwụkwọ ntuziaka, akwụkwọ ntuziaka ndị ọzọ na Autoonics websaịtị.

Debe akwụkwọ ntuziaka a n'ebe ị nwere ike ịchọta ngwa ngwa.

Nkọwapụta, akụkụ, wdg nwere ike ịgbanwe na-enweghị ọkwa maka mmelite ngwaahịa ụfọdụ ụdị nwere ike kwụsị n'enweghị ọkwa.

Atụmatụ nchekwa

• Debe 'Ntụle Nchekwa' niile maka ịrụ ọrụ nchekwa na nke ọma iji zere ihe egwu.
• ᜠ akara na-egosi ịkpachara anya n'ihi ọnọdụ pụrụ iche nke ihe egwu nwere ike ime.

Ịdọ aka ná ntị Ọdịda ịgbaso ntuziaka nwere ike ibute nnukwu mmerụ ahụ ma ọ bụ ọnwụ

1. A ga-etinyerịrị ngwaọrụ na-adịghị mma mgbe ị na-eji unit nwere igwe nwere ike ibute nnukwu mmerụ ahụ ma ọ bụ nnukwu mfu akụ na ụba (dịka njikwa ike nuklia, akụrụngwa ahụike, ụgbọ mmiri, ụgbọ ala, ụgbọ oloko, ụgbọ elu, ngwa mgba ọkụ, ngwa nchekwa, mpụ / mgbochi ọdachi. ngwaọrụ, wdg)
   Ọdịda ịgbaso ntuziaka a nwere ike bute mmerụ ahụ nkeonwe, mfu akụ na ụba ma ọ bụ ọkụ.
2. Ejila nkeji ahụ n'ebe gas na-ere ọkụ / mgbawa / na-emebi emebi, oke iru mmiri, ìhè anyanwụ kpọmkwem, ọkụ na-egbuke egbuke, ịma jijiji, mmetụta ma ọ bụ salinity nwere ike ịdị.
   Ọdịda ịgbaso ntuziaka a nwere ike bute mgbawa ma ọ bụ ọkụ.
3. Wụnye na panel ngwaọrụ iji.
   Ọdịda ịgbaso ntuziaka a nwere ike ibute ọkụ ma ọ bụ ujo eletrik.
4. Ejikọtala, rụkwaa ma ọ bụ nyochaa unit ahụ mgbe ejikọrọ na isi iyi ike.
   Ọdịda ịgbaso ntuziaka a nwere ike ibute ọkụ ma ọ bụ ujo eletrik.
5. Lelee 'njikọ' tupu izipu.
   Ọdịda ịgbaso ntuziaka a nwere ike bute ọkụ.
6. Ewepụla ma ọ bụ gbanwee unit.
   Ọdịda ịgbaso ntuziaka a nwere ike ibute ọkụ ma ọ bụ ujo eletrik.

Ịkpachara anya Ọdịda ịgbaso ntuziaka nwere ike bute mmerụ ahụ ma ọ bụ mmebi ngwaahịa

1. Mgbe ị na-ejikọta mmepụta ike na ntinye ọsọ ọsọ, jiri eriri AWG 20 (0.50 mm2) ma ọ bụ karịa ma mee ka njedebe njedebe na njedebe nke 0.74 ruo 0.90 N m. Mgbe ị na-ejikọta ihe mmetụta sensọ na eriri nkwurịta okwu na-enweghị eriri raara onwe ya nye, jiri AWG 28 ruo 16 USB wee mee ka njedebe ọnụ sie ike na ike nke 0.74 ruo 0.90 N m.
   Ọdịda ịgbaso ntuziaka a nwere ike bute ọkụ ma ọ bụ adịghị arụ ọrụ n'ihi ọdịda kọntaktị.
2. Jiri nkeji n'ime nkọwapụta akwadoro.
   Ọdịda ịgbaso ntuziaka a nwere ike bute ọkụ ma ọ bụ mmebi ngwaahịa
3. Jiri akwa kpọrọ nkụ hichaa otu ahụ, ma ejikwala mmiri ma ọ bụ ihe mgbaze.
   Ọdịda ịgbaso ntuziaka a nwere ike ibute ọkụ ma ọ bụ ujo eletrik.
4. Debe ngwaahịa ahụ pụọ na mgbawa igwe, uzuzu na waya nke na-abanye n'ime unit ahụ.
   Ọdịda ịgbaso ntuziaka a nwere ike bute ọkụ ma ọ bụ mmebi ngwaahịa.

Ịdọ aka ná ntị n'oge eji

• Soro ntuziaka dị na 'akpachara anya n'oge ojiji'. Ma ọ bụghị ya, ọ nwere ike ịkpata ihe a na-atụghị anya ya
  ihe mberede.
• Lelee polarity nke ọnụ ụzọ tupu ịjikọ ihe mmetụta okpomọkụ. Maka RTD
  okpomọkụ ihe mmetụta, waya ya dị ka 3-waya ụdị, iji eriri na otu ọkpụrụkpụ na ogologo. Maka ihe mmetụta okpomọkụ thermocouple (TC), jiri waya akwụ ụgwọ ahapụtara maka
  ịgbatị waya.
• Chebe na elu voltage ahịrị ma ọ bụ ahịrị ọkụ iji gbochie mkpọtụ inductive. Ọ bụrụ na ị na-etinye eriri ọkụ na ahịrị mgbama ntinye nso, jiri nzacha ahịrị ma ọ bụ onye ọbịa na ahịrị ọkụ yana waya kpuchiri ekpuchi n'ahịrị mgbaama ntinye. Ejila nso akụrụngwa nke na-ebute ike ndọta siri ike ma ọ bụ mkpọtụ ugboro ugboro.
• Wụnye ihe ngbanwe ọkụ ma ọ bụ ihe mgbawa sekit n'ebe dị mfe ịnweta maka ịnye ma ọ bụ kwụpụ ike.
• Ejila unit ahụ maka ebumnuche ọzọ (dịka voltmeter, ammeter), mana njikwa okpomọkụ.
• Mgbe ị na-agbanwe ihe mmetụta ntinye, buru ụzọ gbanyụọ ike tupu ịgbanwee. Mgbe ịgbanwee ihe mmetụta ntinye, gbanwee uru nke oke kwekọrọ.
• 24 VACᜠ, 24-48 VDCᜠ ike ọkọnọ kwesịrị mkpuchi na oke volta.tage/ugbu a ma ọ bụ klaasị 2, ngwaọrụ ọkọnọ ike SELV.
• Mee oghere achọrọ gburugburu unitforradiation nke okpomọkụ. Maka nha okpomọkụ ziri ezi, kpoo unit ahụ ihe karịrị nkeji 20 ka ọkụ gachara na ike.
• Gbaa mbọ hụ na ọkọnọ ike voltage ruru na nke e gosiri voltage n'ime 2 sk ka enyechara ike.
• Ejila waya na ọdụ ọdụ ndị anaghị eji.
• Enwere ike iji nkeji a na gburugburu ndị a.
  • N'ime ụlọ (na ọnọdụ gburugburu ebe e depụtara na 'Nkọwa')
  • AltitudeMax. 2,000m
  • ogo mmetọ 2
  • Ụdị nwụnye II

Ozi ịtụ

Nke a bụ naanị maka ntụnye aka, ezigbo ngwaahịa anaghị akwado mkpokọta niile. Maka ịhọrọ ụdị akọwapụtara, soro Autonics websaịtị .

1. Nha
   S: DIN W 48 × H 48 mm
   SP: DIN W 48 × H 48 mm (ụdị nkwụnye 11)
   Y: DIN W 72 × H 36 mm
   M: DIN W 72 × H 72 mm
   H: DIN W 48 × H 96 mm
   W: DIN W 96 × H 48 mm
   L: DIN W 96 × H 96 mm
2. Mbupute mkpu
   N: Enweghị mkpu
   1. 1 mkpu
   2.  2 mkpu
3. Ịnye ọkụ
   2: 24VACᜠ 50/60Hz, 24-48 VDCᜠ
   4: 100-240 VACᜠ50/60 Hz
4. Mwepụta njikwa
   N: Ihe ngosi - enweghị njikwa njikwa
   R: Relay + SSR mbanye

Ngwa ngwaahịa

• Ngwaahịa
• Bracket
• Akwụkwọ ntuziaka

rere iche

• 11 pin: PG-11, PS-11 (N)
• Mkpuchi mkpuchi njedebe: RSA / RMA / RHA / RLA mkpuchi

Nkọwapụta

Usoro		TC4□-2□	TC4□-4□
Ike ọkọnọ		24 VACᜠ 50/60 Hz ±10%24-48 VDCᜡ ±10%	100 - 240 VACᜠ 50/60 Hz ± 10%
Ike oriri		AC: ≤ 5 VA, DC: ≤ 3 W	≤5 VA
Sampling oge		100 ms
Ntinye nkọwapụta		Rụtụ aka na 'ụdị ntinye na iji oke'.
Njikwa mmepụta	Ntugharị	250 VACᜠ 3 A, 30 VDCᜡ 3 A, 1a
	SSR	12 VDCᜡ±2 V, ≤ 20mA
Mbupute mkpu		250 VACᜠ 1 A 1a
Ngosipụta ụdị		7 Nkeji (acha uhie uhie, akwụkwọ ndụ akwụkwọ ndụ, odo), ụdị ika ikanam
Njikwa ụdị	kpo oku, jụrụ	Gbanyụọ/gbanyụọ, P, PI, PD, njikwa PID
Hysteresis		1 ruo 100 (0.1 ruo 50.0) ℃/℉
Nha nhata band (P)		0.1 ruo 999.9 ℃/℉
Mkpokọta oge (M)		0 ruo 9,999 sk
Mwepụta oge (D)		0 ruo 9,999 sk
Njikwa okirikiri (T)		0.5 ruo 120.0 sk
Akwụkwọ ntuziaka tọgharịa		0.0 ruo 100.0%
Relay ndụ okirikiri	Mechanical	OUT1/2, AL1/2: ≥ 5,000,000 arụmọrụ
	Eletriki	OUT1/2: ≥ 200,000 arụmọrụ (ibu-eguzogide: 250 VACᜠ 3A) AL1/2: ≥ 300,000 arụmọrụ (ibu-eguzogide: 250 VACᜠ 1 A)
Dielectric ike		N'etiti ọdụ ntinye na ọdụ ike: 1,000 VACᜠ 50/60 Hz maka 1 nkeji	N'etiti ọdụ ntinye na ọdụ ike: 2,000 VACᜠ 50/60 Hz 1 min
Mmaji		0.75 mm amplitude na ugboro 5 ruo 55Hz (maka 1 min) na X, Y, Zdirection ọ bụla maka awa 2
Mkpuchi iguzogide		≥ 100 MΩ (500 VDCᜡ megger)
Mkpọtụ mgbochi		Mkpọtụ nwere ụdị square (obosara usu: 1 ㎲) site na simulator mkpọtụ ± 2 kV R-phase, S-phase
Ebe nchekwa njide		≈ 10 afọ (ụdị ebe nchekwa semiconductor na-adịghị agbanwe agbanwe)
Ambient okpomọkụ		-10 ruo 50 ℃, nchekwa: -20 ka 60 ℃ (enweghị kefriza ma ọ bụ condensation)
iru mmiri gburugburu		35 ruo 85% RH, nchekwa: 35 ruo 85% RH (enweghị friza ma ọ bụ condensation)
Mkpuchi ụdị		Akara: ▱, mkpuchi mkpuchi okpukpu abụọ ma ọ bụ gbasie ike (ike dielectric n'etiti akụkụ ntinye ihe na akụkụ ike: 1 kV)	Akara: ▱, mkpuchi mkpuchi okpukpu abụọ ma ọ bụ gbasie ike (ike dielectric n'etiti akụkụ ntinye ihe na akụkụ ike: 2 kV)
Nkwenye		ᜢ ᜧ
Nkeji ibu (akwakọrọ)		TC4S: ≈ 94g (≈ 141 g)	TC4SP: ≈ 76 g (≈ 123 g)
		TC4Y: ≈ 85 g (≈ 174 g)	TC4M: ≈ 133 g (≈ 204 g)
		TC4W: ≈ 122 g (≈ 194 g)	TC4H: ≈ 122 g (≈ 194 g)
		TC4L: ≈ 155 g (≈ 254 g)

Ụdị ntinye na iji oke

Ntinye ụdị		Decimalisi	Ngosipụta	Iji oke (℃)			Iji oke ()
Thermo-di na nwunye	K (CA)	1	KC	-50	ka	1,200	-58	ka	2,192
	J (IC)	1	JIC	-30	ka	500	-22	ka	932
	L (IC)	1	LIC	-40	ka	800	-40	ka	1,472
RTD	Cu50 Ω	1	CU	-50	ka	200	-58	ka	392
		0.1	CU L	-50.0	ka	200.0	-58.0	ka	392.0
	DPt100 Ω	1	DPt	-100	ka	400	-148	ka	752
		0.1	DPtL	-100.0	ka	400.0	-148.0	ka	752.0

Gosipụta izi ezi

Ntinye ụdị	Iji okpomọkụ	Ngosipụta izi ezi
Thermo-coupleRTD	N'ime ụlọ okpomọkụ (23 ℃ ± 5 ℃)	(PV ± 0.5% ma ọ bụ ± 1 ℃ dị elu otu) ± 1-nọmba  Thermocouple L, RTD Cu50 Ω: (PV ± 0.5% ma ọ bụ ± 2 ℃ dị elu otu) ± 1-nọmba.
	Oke okpomọkụ adịghị n'ime ụlọ	(PV ± 0.5% ma ọ bụ ± 2 ℃ dị elu otu) ± 1-nọmba Thermocouple L, RTD Cu50 Ω: (PV ± 0.5% ma ọ bụ ± 3 ℃ dị elu otu) ± 1 digit

• N'ihe gbasara usoro TC4SP, ± 1℃ ga-agbakwunye.
• Ọ bụrụ na atọrọ nkọwa ntinye ka ọ bụrụ ihe ngosi 'decimal point 0.1', tinye ±1℃ site na ọkọlọtọ ziri ezi.

Nkọwa nke otu

1. Akụkụ ngosi okpomọkụ (Uhie)
   • Ụdị ịgba ọsọ: Na-egosiputa PV (uru dị ugbu a).
   • Ụdị nhazi: na-egosipụta aha paramita,
2. egosi
3. igodo ntinye

Ngosipụta	Aha
[MODE]	Igodo ọnọdụ
[◀], [▼], [▲]	Ịtọ igodo njikwa uru

 

Ngosipụta	Aha	Nkọwa
▲■▼	Ngbanwe	Na-egosiputa PV deviation dabere na SV (Ntọala uru) site na LED.▲: ON mgbe ndịiche gafere 2 ℃■: ON mgbe ndiiche dị n'ime ± 2 ℃▼: NA mgbe ndiiche dị n'okpuru －2 ℃ Ọ na-egbuke egbuke n'oge nhazi akpaaka ọ bụla 1 sk.
SV	Ntọlite ​​uru	Na-agbanye mgbe egosiri SV na akụkụ ngosi okpomọkụ.
℃, ℉	Ngalaba okpomọkụ	Na-egosiputa nkeji ahọpụtara (paramita).
AL1/2	Mbupute mkpu	Na-agbanye mgbe mpụta mkpu ọ bụla agbanyere.
Mpụ	Mwepụta njikwa	Na-agbanye mgbe mmepụta njikwa na-agbanye. • Njikwa CYCLE/PHASE nke mmepụta ụgbọala SSR: Na-agbanye mgbe MV karịrị 3.0%. (naanị maka ụdị ike AC)

Njehie

Ngosipụta	Nkọwa	Nchọpụta nsogbu
MEghere	Ọkụ ọkụ mgbe a kwụsịrị ihe mmetụta ntinye ma ọ bụ ejikọtaghị ihe mmetụta.	Lelee ọkwa ihe mmetụta ntinye.
	Ọkụ ọkụ mgbe PV dị elu karịa oke ntinye.	Mgbe ntinye dị n'ime oke ntinye akwadoro, ngosi a ga-apụ n'anya.
Llll	Ọkụ ọkụ mgbe PV dị ala karịa oke ntinye.

Akụkụ

• Nkeji: mm, Maka eserese zuru ezu, soro Autonics websaịtị.
• N'okpuru bụ dabere na TC4S Series.
  
  

Usoro	Ahụ					Ogwe bechapụ
	A	B	C	D	E	F	G	H	I
TC4S	48	48	6	64.5	45	≥ 65	≥ 65	45+0.60	45+0.60
TC4SP	48	48	6	72.2	45	≥ 65	≥ 65	45+0.60	45+0.60
TC4Y	72	36	7	77	30	≥ 91	≥ 40	68+0.70	31.5+0.50
TC4W	96	48	6	64.5	44.7	≥ 115	≥ 65	92+0.80	45+0.60
TC4M	72	72	6	64.5	67.5	≥ 90	≥ 90	68+0.70	68+0.70
TC4H	48	96	6	64.5	91.5	≥ 65	≥ 115	45+0.60	92+0.80
TC4L	96	96	6	64.5	91.5	≥ 115	≥ 115	92+0.80	92+0.80

Bracket 

Usoro ntinye

TC4S

Ihe mkpuchi flathead

TC4Y

Crosshead screwdriver

Usoro ndị ọzọ

Ihe mkpuchi flathead

Wụnye ngwaahịa ahụ na panel nwere nkwado, kpatụ ụzọ akụ site na iji screw driver.

N'ihe gbasara TC4Y Series, kechie bolts.

Nkọwapụta Terminal Crimp

• Nkeji: mm, Jiri crimp ọnụ nke eso udi

Waya ferrule

ọdụdụ crimp ọnụ

Ọnụ crimp gburugburu

Njikọ

• TC4S
  
• TC4SP
  
• TC4Y
  
• TC4W
  
• TC4M
  
• TC4H/L
  

Ntọala ọnọdụ

Ntọala paramita

• A na-arụ ọrụ / gbanyụọ ụfọdụ parampat dabere na ụdị ma ọ bụ ntọala nke parampat ndị ọzọ. Rụtụ aka na nkọwa nke ihe ọ bụla.
• Oke ntọala dị na mbikọ bụ maka iji ihe ngosi ntụpọ ntụpọ na nkọwa ntinye.
• Ọ bụrụ na enweghị ntinye igodo maka ihe karịrị 30 sekọnd na oke ọ bụla, ọ na-alaghachi na ọnọdụ RUN.
• Mgbe ịpị igodo [MODE] n'ime 1 sekọnd ka ịlaghachi na ọnọdụ ọrụ site na parameter, ọ ga-abanye n'otu paramita tupu ịlaghachi azụ.
• Igodo [MODE]: Chekwa uru ntọala paramita dị ugbu a wee gaa na paramita na-esote. Igodo [◀]: Na-ebugharị kọlụm mgbe ị na-agbanwe uru setịpụrụ [▲], [▼] igodo: Họrọ oke / Gbanwee uru setịpụrụ
• Usoro ntọala paramita akwadoro: Parameter 2 Group → Parameter 1 group → ọnọdụ ntọala SV ■ Parameter 1 otu
• Na-egosi naanị na ụdị mmepụta njikwa

Oke		Ngosipụta	Ọdabara	Ịtọ ntọala oke	Ọnọdụ
1-1	Ọnọdụ mkpu AL1	L	250	Mkpu mgbagha: -FS ka FS ℃/℉ Oti mkpu uru zuru oke: N'ime oke ntinye.	2-12/14AL1/2 mkpu ọrụ: AM1 ka AM6
1-2	Ọnọdụ mkpu AL2	L2	250	[ụdị mmepụta mkpu 2] Otu dị ka 1-1 AL1 okpomọkụ mkpu
1-3	Ndozi akpaaka	T	Gbanyụọ	Gbanyụọ: Kwụsị, ONYE: Egbu	2-8 Ụdị njikwa: PID
1-4	Proportalband	P	0) 0	0.1 ruo 999.9 ℃/℉
1-5	Oge njikọta	I	0000	0 (gbanyụọ) ruo 9999 sk
1-6	Oge ewepụtara	D	0000	0 (gbanyụọ) ruo 9999 sk
1-7	Ntọgharị akwụkwọ ntuziaka	Izu ike	05) 0	0.0 ruo 100.0%	2-8 Ụdị njikwa: PID & 1-5 Integraltime: 0
1-8	Hysteresis	YS	002	1 ruo 100 (0.1 ruo 50.0) ℃/℉	2-8 Ụdị njikwa: ONOF

Parameter 2 otu

N'ihe banyere ihe ngosi, naanị 2-1 ruo 4 / 2-19 parameters

Oke		Ngosipụta	Ọdabara	Ịtọ ntọala oke		Ọnọdụ
2-1	Ntinye ntinye 01)	Na-T	KC	Rụtụ aka na 'ụdị ntinye na iji oke'.		-
2-2	Ngalaba okpomọkụ 01)	UNIT	?C	℃, ℉		-
2-3	Ntinye ntinye	IN-B	0000	-999 ruo 999 (-199.9 ruo 999.9) ℃/℉		-
2-4	Tinye nzacha dijitalụ	M F	00)	0.1 ruo 120.0 sk		-
2-5	SV dị ala 02)	L-SV	-050	N'ime nkọwa ntinye 2-1: Iji oke, L-SV ≤ H-SV - 1-nọmba ℃/℉ H-SV ≥ L-SV + 1-nọmba ℃/℉		-
2-6	SV dị elu 02)	-SV	200			-
2-7	Ụdị mmepụta njikwa	O-FT	ET	Okpomọkụ: ikpo ọkụ, dị jụụ: jụrụ oyi		-
2-8	Ụdị njikwa 03)	C-MD	PID	PID, ONOF: Gbanye/ Gbanyụọ		-
2-9	Mwepụta njikwa	Mpụ	RLY	RLY: relay, SSR		-
2-10	Ụdị mmepụta mbanye SSR	SSrM	STND	[AC voltage nlereanya]STND: ọkọlọtọ, CYCL: okirikiri, PHAS: usoro		2-9 Mmepụta njikwa: SSR
2-11	Usoro nchịkwa	T	02) 0	0.5 ruo 120.0 sk		2-9 Mmepụta njikwa: RLY2-10 SSR ụdị mmepụta mbanye: STND
			00 0			2-9 Mmepụta njikwa: SSR2-10 SSR ụdị mmepụta mbanye: STND
2-12	AL1 mkpu ọrụ 04)	L-	M!□□□.■	□□□ AM0: OffAM1: Mgbanwe dị elu AM2: Ngbanwe dị elu alarmAM3: Ngbanwe dị elu, mgbagha dị ala AM4: Ngbanwe dị elu, mgbagha dị ala AM5: Uru zuru oke AM6: Uru zuru oke ala mkpu SBA: Sensor break alarmLBA: Mkpuchi nkwụsịtụ aka (LBA)		-
2-13	Nhọrọ mkpu AL1			■A: Ọkọlọtọ mkpuC: Usoro njikere 1E: Njikere usoro 2	B: Oti mkpu D: Mkpọchi mkpu na usoro njikere 1F: Oti mkpu na usoro njikere 2	-
				• Tinye na ntọala nhọrọ: Pịa [◀] igodo 2-12 AL-1 ọrụ mkpu.
2-14	AL2 mkpu ọrụ 04)	L-2	M	[ụdị mmepụta mkpu 2] Otu dị ka 2-12/13 AL1 ọrụ mkpu / nhọrọ		-
2-15	Nhọrọ mkpu AL2
2-16	Mbipụta njiko	YS	000	1 ruo 100 (0.1 ruo 50.0) ℃/℉		2-12/14AL1/2 mkpu ọrụ: AM1 ka 6
2-17	oge LBA	LBAT	0000	0 (gbanyụọ) ruo 9,999 sk ma ọ bụ akpaaka (ntugharị akpaaka)		2-12/14AL1/2 mkpu ọrụ: LBA
2-18	Njikọ LBA	LBAB	002	0 (gbanyụọ) ruo 999 (0.0 ruo 999.9) ℃/℉ orauto (ntugharị akpaaka)		2-12/14AL1/2 mkpu ọrụ: LBA & 2-17 LBAtime: ： 0
2-19	igodo ntinye dijitalụ	DI-K	KWỤSỊ	Kwụsị: Kwụsị mmepụta njikwa, AL.RE: nrụpụta mkpu, AT*: Ndozi akpaaka, Gbanyụọ		* 2-8 Ụdị njikwa: PID
2-20	Njehie ihe mmetụta MV	ErMV	00) 0	0.0: Gbanyụọ, 100.0: GBANYE		2-8 Ụdị njikwa: ONOF
				0.0 ruo 100.0%		2-8 Ụdị njikwa: PID
2-21	Mkpọchi	LOC	Gbanyụọ	OFFLOC1: Oke 2 mkpọchi otu LOC2: Parameter 1/2 Otu mkpọchi LOC3: Oke 1/2 Otu, mkpọchi ntọala SV		-
				[Ihe ngosi ihe ngosi]OFFLOC1: Oke 2 mkpọchi otu
Oke		Ngosipụta	Ọdabara	Ịtọ ntọala oke		Ọnọdụ
2-1	Ntinye ntinye 01)	Na-T	KC	Rụtụ aka na 'ụdị ntinye na iji oke'.		-
2-2	Ngalaba okpomọkụ 01)	UNIT	?C	℃, ℉		-
2-3	Ntinye ntinye	IN-B	0000	-999 ruo 999 (-199.9 ruo 999.9) ℃/℉		-
2-4	Tinye nzacha dijitalụ	M F	00)	0.1 ruo 120.0 sk		-
2-5	SV dị ala 02)	L-SV	-050	N'ime nkọwa ntinye 2-1: Iji oke, L-SV ≤ H-SV - 1-nọmba ℃/℉ H-SV ≥ L-SV + 1-nọmba ℃/℉		-
2-6	SV dị elu 02)	-SV	200			-
2-7	Ụdị mmepụta njikwa	O-FT	ET	Okpomọkụ: ikpo ọkụ, dị jụụ: jụrụ oyi		-
2-8	Ụdị njikwa 03)	C-MD	PID	PID, ONOF: Gbanye/ Gbanyụọ		-
2-9	Mwepụta njikwa	Mpụ	RLY	RLY: relay, SSR		-
2-10	Ụdị mmepụta mbanye SSR	SSrM	STND	[AC voltage nlereanya]STND: ọkọlọtọ, CYCL: okirikiri, PHAS: usoro		2-9 Mmepụta njikwa: SSR
2-11	Usoro nchịkwa	T	02) 0	0.5 ruo 120.0 sk		2-11Controloutput: RLY2-12 SSR mbanye mmepụta ụdị: STND
			00 0			2-11Controloutput: SSR2-12 SSR mbanye mmepụta ụdị: STND
2-12	AL1 mkpu ọrụ 04)	L-	M!□□□.■	□□□ AM0: OffAM1: Mgbanwe dị elu AM2: Ngbanwe dị elu alarmAM3: Ngbanwe dị elu, mgbagha dị ala AM4: Ngbanwe dị elu, mgbagha dị ala AM5: Uru zuru oke AM6: Uru zuru oke ala mkpu SBA: Sensor break alarmLBA: Mkpuchi nkwụsịtụ aka (LBA)		-
2-13	Nhọrọ mkpu AL1			■A: Ọkọlọtọ mkpuC: Usoro njikere 1E: Njikere usoro 2	B: Oti mkpu D: Mkpọchi mkpu na usoro njikere 1F: Oti mkpu na usoro njikere 2	-
				• Tinye na ntọala nhọrọ: Pịa [◀] igodo 2-12 AL-1 ọrụ mkpu.
2-14	AL2 mkpu ọrụ 04)	L-2	M	[ụdị mmepụta mkpu 2] Otu dị ka 2-12/13 AL1 ọrụ mkpu / nhọrọ		-
2-15	Nhọrọ mkpu AL2
2-16	Mbipụta njiko	YS	000	1 ruo 100 (0.1 ruo 50.0) ℃/℉		2-12/14AL1/2 mkpu ọrụ: AM1 ka 6
2-17	oge LBA	LBAT	0000	0 (gbanyụọ) ruo 9,999 sk ma ọ bụ akpaaka (ntugharị akpaaka)		2-12/14AL1/2 mkpu ọrụ: LBA
2-18	Njikọ LBA	LBAB	002	0 (gbanyụọ) ruo 999 (0.0 ruo 999.9) ℃/℉ orauto (ntugharị akpaaka)		2-12/14AL1/2 mkpu ọrụ: LBA & 2-17 LBAtime: ： 0
2-19	igodo ntinye dijitalụ	DI-K	KWỤSỊ	Kwụsị: Kwụsị mmepụta njikwa, AL.RE: nrụpụta mkpu, AT*: Ndozi akpaaka, Gbanyụọ		* 2-8 Ụdị njikwa: PID
2-20	Njehie ihe mmetụta MV	ErMV	00) 0	0.0: Gbanyụọ, 100.0: GBANYE		2-8 Ụdị njikwa: ONOF
				0.0 ruo 100.0%		2-8 Ụdị njikwa: PID
2-21	Mkpọchi	LOC	Gbanyụọ	OFFLOC1: Oke 2 mkpọchi otu LOC2: Parameter 1/2 Otu mkpọchi LOC3: Oke 1/2 Otu, mkpọchi ntọala SV
				[Ihe ngosi ihe atụ] Gbanyụọ LOC1: Mkpọchi otu nkeji 2

1. A na-ebulite paramita ndị dị n'okpuru mgbe agbanwere uru ntọala
   • Oke 1 otu: AL1/2 okpomọkụ mkpu
   • Oke 2 otu: Ntinye ntinye, SV elu/obere oke, ihe mmepụta mkpu, Blaine, Laban
   • Ụdị ntọala SV: SV
2. IASIS dị ala / dị elu karịa oke ala / elu mgbe ọnụ ahịa gbanwere, SVis gbanwere na ọnụ ala dị ala / elu. Ọ bụrụ na agbanwere nkọwa ntinye 2-1, a ga-agbanwe uru ya ka ọ bụrụ Min./Max. uru nke nkọwa ntinye.
   1. Mgbe ị na-agbanwe uru site na PID gaa na ONOF, a na-agbanwe uru ọ bụla nke paramita ndị a. 2-19 Igodo ntinye dijitalụ: Gbanyụọ, 2-20 njehie sensọ MV: 0.0 (Mgbe ịtọ uru dị ala karịa 100.0)
   2. 1-1/2 AL1, AL2 oti mkpu okpomọkụ ntọala ụkpụrụ na-na-na-na-na-na-na-na-na-na-na-agbanwe agbanwe.

18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002

www.autonics.com | + 82-2-2048-1577 | sales@autonics.com

Akwụkwọ / akụrụngwa

Autonics TC Series TC4Y-N4R Otu Ngosipụta PID ndị na-ahụ maka okpomọkụ [pdf] Akwụkwọ ntuziaka TC Series TC4Y-N4R Otu Ngosipụta PID ndị na-ahụ maka okpomọkụ, TC Series, TC4Y-N4R Otu Ngosipụta PID Ndị na-ahụ maka okpomọkụ, Ndị na-ahụ maka okpomọkụ PID, Ndị na-ahụ maka okpomọkụ.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ