AtomStack F03-0329-0AA1 Swift

Nkọwapụta

• Aha ngwaahịa: AtomStack Swift
• Nọmba nlereanya: F03-0329-0AA1
• Ụdị: B
• Ntinye ike: DC 24V
• ọdụ ụgbọ mmiri: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Ngosipụta ọnọdụ: Solid blue when working

Ntuziaka ojiji ngwaahịa

Ndepụta akụkụ:

• Mgbakọ X-axis
• Left Y-axis assembly (with motor)
• Right Y-axis assembly
• Ihe nkwụnye ọkụ
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Ndepụta akụkụ

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Mara: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Mara:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Ụzọ mgbado anya:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Ndụmọdụ:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Ụzọ nbudata ngwa ngwa Kọmputa:
Njikọ nbudata AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Nyochaa ka ibudata

Akụrụngwa akụrụngwa

LightBurn
Unofficial software. Requires a separate purchase

Ụzọ nbudata ngwa ngwa Lightburn: Budata njikọ: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Mepee ngwa ngwa LightBurn, họrọ: Ngwaọrụ – Bubata
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Mara: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Ntuziaka onye ọrụ

Kpọtụrụ anyị

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Nchọpụta nsogbu
• Nlekọta

Ndị ọrụ nlekọta ndị ahịa:

• For the detailed warranty policy, please visit our official websaịtị: www.atomstack.com
• Maka nkwado teknụzụ na ọrụ, biko email: support@atomstack.com

Onye nrụpụta:
Akụkọ ihe mere eme nke Shenzhen AtomStack Technologies Co., Ltd.

Zip koodu: 518172

adreesị:
17th Floor, Building 3A, Phase II, Intelligent Park, No. 76, Baohe Avenue, Baolong Street, Longgang District, Shenzhen, Guangdong, China.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

FAQ

Kedu ihe m ga-eme ma ọ bụrụ na enwere m nsogbu n'oge echichi?

If you face any difficulties during installation, refer to the video tutorial available on the official websaịtị ma ọ bụ kpọtụrụ nkwado ndị ahịa maka enyemaka.

Akwụkwọ / akụrụngwa

ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] Akwụkwọ ntuziaka onye ọrụ F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ