1. Okwu mmalite
Thank you for choosing the GOBOULT Fluid X Pro Bluetooth Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before use.
2. Ihe ngwugwu
Gbaa mbọ hụ na ihe niile edepụtara n'okpuru dị na ngwugwu gị:
- GOBOULT Fluid X Pro Headphones
- -Dị-C Nchaji USB
- Akwụkwọ ntuziaka onye ọrụ
- Ear Cushions (pre-installed or spare)
- Akwụkwọ ikike kaadị
3. Ngwaahịa gafereview
Figure 3.1: Tactile Button Controls
Njikwa na ọdụ ụgbọ mmiri:
- Bọtịnụ ike: Pịa ma jide ya ka ọ gbanye/gbanyụọ. Pịa obere oge maka egwuregwu/kwụsịtụ.
- Elu elu (+): Short press to increase volume. Long press to skip to the next track.
- Mpịakọta ọnụ (-): Short press to decrease volume. Long press to skip to the previous track.
- Bọtịnụ ANC: Press to cycle through Active Noise Cancellation modes (ANC On/Off/Transparency).
- EQ Mode Button: Press to cycle through the 4 available EQ modes.
- Ụdị-C Port: Maka ịchaji ekweisi.
- Ọdụ ụgbọ mmiri AUX: Maka njikọ ọdịyo wired.
- Igwe okwu: Integrated Zen ENC Mic for calls.
Onyonyo 3.2: Isi njiri maraview
4. Nhazi
4.1. Nchaji mbụ
Before first use, fully charge your headphones. Connect the provided Type-C charging cable to the headphone's Type-C port and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator will show charging status and turn off when fully charged.
4.2. Ịgbanye / gbanyụọ
- Iji gbanye: Press and hold the Power button for approximately 3 seconds until the LED indicator flashes.
- Iji gbanyụọ: Pịa ma jide bọtịnụ ike maka ihe dịka sekọnd 5 ruo mgbe ihe ngosi LED gbanyụrụ.
4.3. Njikọ Bluetooth
Ọgụgụ 4.1: Bluetooth 5.4 Njikọta
- Gbaa mbọ hụ na agbanyụrụ ekweisi.
- Pịa ma jide bọtịnụ Ike maka ihe dị ka sekọnd 5-7 ruo mgbe ihe ngosi LED na-acha uhie uhie na acha anụnụ anụnụ na-egbukepụ n'otu aka ahụ, na-egosi ụdị njikọ.
- Na ngwaọrụ gị (smartphone, tabletị, laptọọpụ), gbanye Bluetooth wee chọọ ngwaọrụ dị.
- Select "GOBOULT Fluid X Pro" from the list of found devices.
- Ozugbo ejikọrọ, ihe ngosi LED ga -eji nwayọ na -acha anụnụ anụnụ.
The headphones support Bluetooth 5.4 for stable and fast connections up to 10 meters.
5. Ntuziaka ọrụ
5.1. Ngwugharị ọdịyo
- Gwuo/kwụsịtụ: Obere pịa bọtịnụ Ike.
- Track na-esote: Pịa bọtịnụ olu elu (+) ogologo.
- Gara aga Track: Ogologo oge pịa bọtịnụ ụda ala (-).
- Ndozi olu: Pịa obere bọtịnụ Mpịakọta Elu (+) ma ọ bụ Mpịakọta Elu (-).
5.2. Njikwa oku
- Azịza/Kwụsị Oku: Obere pịa bọtịnụ Ike.
- Jụ oku: Pịa ogologo bọtịnụ Ike.
- Nọmba Ikpeazụ emegharịgharịrị: Double-press the Power button.
5.3. Nkagbu mkpọtụ mkpọtụ (ANC)
Figure 5.1: Active Noise Cancellation in action
Press the dedicated ANC button to activate or deactivate Active Noise Cancellation. This feature helps reduce ambient noise for a more immersive listening experience. Cycle through ANC On, ANC Off, and Transparency modes as needed.
5.4. Ụdị EQ
The headphones feature 4 Equalizer (EQ) modes to customize your audio experience. Press the EQ Mode button to cycle through the available presets (e.g., Bass Boost, Vocal, Balanced, Gaming). The specific modes may vary.
5.5. Ịgba chaa chaa mode
Figure 5.2: Gaming Mode for Low Latency Audio
Activate Gaming Mode for ultra-low latency audio (approximately 50ms), providing a more synchronized audio-visual experience during gaming. Refer to the specific button control for activating this mode (often a long press on the EQ button or a dedicated button).
5.6. Dual Listening Modes (Wireless & Wired)
Figure 5.3: Wireless and Wired Connectivity Options
- Ụdị ikuku: Connect via Bluetooth for cordless audio.
- Ọnọdụ Wired: Connect an AUX cable (not included) to the headphone's AUX port and your audio source. In wired mode, the microphone is typically inactive.
5.7. Onye enyemaka olu
Figure 5.4: Voice Assistant Integration
Activate your device's voice assistant (Siri, Google Assistant) by a specific button press (refer to product diagram or quick start guide for exact control). This allows for hands-free control of your device.
6. Ịchaji
Foto 6.1: Ndụ Batrị na Ịchaji Ngwa Ngwa
To charge the headphones, connect the provided Type-C cable to the charging port on the headphones and a compatible USB power source. The LED indicator will show charging status. A full charge provides up to 70 hours of playback without ANC, or 35 hours with ANC activated. A quick 10-minute charge can provide approximately 5 hours of playtime.
7. Nlekọta
7.1. Nhicha
- Jiri akwa dị nro hichaa ekweisi.
- Ejila ihe mkpocha abrasive, mmanya, ma ọ bụ ihe mgbaze kemịkal.
- The ear cushions can be gently wiped with a damp cloth if necessary, then allowed to air dry completely.
7.2. Nchekwa
Debe ekweisi n'ebe dị jụụ ma kpọọ nkụ, ebe anwụ na-anaghị anwụ kpọmkwem na oke okpomọkụ dị elu. Nhazi a na-apịachi apịachi na-enye ohere maka nchekwa dị obere.
7.3. Mmiri Nguzogide
The headphones are IPX5 water resistant, meaning they are protected against low-pressure water jets from any direction. This makes them splash-proof, rain-proof, and sweat-proof. Do not submerge the headphones in water.
8. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwe ekweisi anaghị agba ọkụ | Batrị dị ala | Chajie ekweisi nke ọma. |
| Enweghị ike ijikọ site na Bluetooth | Headphones not in pairing mode; Device Bluetooth off; Too far from device | Ensure headphones are in pairing mode (flashing red/blue). Turn on Bluetooth on your device. Move headphones closer to your device (within 10m). |
| Enweghị ụda | Volume too low; Not connected; Wired mode issue | Increase volume on headphones and device. Re-pair Bluetooth. Check AUX cable connection if in wired mode. |
| Ogo oku na-adịghị mma | Weak signal; Environmental noise | Move closer to your device. Ensure Zen ENC Mic is not obstructed. Try enabling/disabling ANC. |
| ANC anaghị arụ ọrụ nke ọma | ANC off; Improper fit | Pịa bọtịnụ ANC iji mee ka ọ rụọ ọrụ. Hazie ekweisi ka ọ dabara nke ọma n'elu ntị gị. |
9. Nkọwapụta
Figure 9.1: 16-bit Digital Audio Processing
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | ProBass |
| Njikọta | Bluetooth 5.4, Wired (AUX) |
| Oke Bluetooth | Ruo mita 10 |
| Nha ọkwọ ụgbọ ala ọdịyo | 40mm Ndị ọkwọ ụgbọ ala dị ike |
| Njikwa mkpọtụ | Active Noise Cancellation (ANC), Passive Noise Cancellation |
| Igwe okwu | Zen ENC Mic |
| Ndụ batrị | Up to 70 hours (without ANC), 35 hours (with ANC) |
| Nchaji ọdụ ụgbọ mmiri | Ụdị-C Nchaji ngwa ngwa |
| Mmiri Nguzogide | IPX5 (Splash, Rain, Sweat Proof) |
| Oge Latịn | 50ms (Gaming Mode) / 60ms (General) |
| Ibu Ibu | 205 grams |
| Akụkụ ngwaahịa | 22 x 20 x 83 cm |
| Mgbochi | 32 ohms |
| Ngwa gụnyere | Headphone, Type C Charging Cable, User Manual, Warranty Card, Ear Cushions |
10. Akwụkwọ ikike na nkwado
10.1. Akwụkwọ ikike Ozi
The GOBOULT Fluid X Pro Bluetooth Headphones come with a 1-afọ emeputa akwụkwọ ikike from the date of purchase. This warranty covers manufacturing defects and ensures reliable after-sales support. Please retain your purchase receipt and warranty card for any claims.
10.2. Nkwado ndị ahịa
For any questions, technical assistance, or warranty claims, please contact GOBOULT customer support through the details provided on your warranty card or visit the official GOBOULT websaịtị.
