Inkbird 10-in-1 Air Quality Monitor

1. Okwu mmalite

The Inkbird 10-in-1 Air Quality Monitor (Model Inkbird-IAQM) is designed to provide comprehensive indoor air quality analysis. This device continuously tracks ten key environmental parameters: Carbon Dioxide (CO2), Particulate Matter (PM2.5/PM10), Total Volatile Organic Compounds (TVOC), Formaldehyde (HCHO), Air Quality Index (AQI), temperature, humidity, and time/date. It offers real-time monitoring with high accuracy, smart WiFi integration for remote access, and customizable alerts to help maintain a healthy indoor environment.

This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Inkbird Air Quality Monitor.

2. Ngwaahịa gafereview

Atụmatụ igodo

• 10-in-1 Air Analysis: Monitors CO2, PM2.5/PM10, TVOC, HCHO, AQI, temperature, humidity, time, and date.
• Oke izi ezi: Provides readings with a typical accuracy of ±5%.
• Smart WiFi Integration: Connects to 2.4GHz WiFi for remote monitoring via the INKBIRD app.
• Long-Term Data Storage: Stores over 700 days of historical data, exportable as CSV reports.
• Proactive Dual Alarms: Customizable thresholds for CO2, PM2.5, and AQI with instant light and sound warnings.
• 6.1" IPS Display: Sunlight-readable screen with auto-brightness, 6 display modes, °C/°F switching, and 12/24hr clock.
• 10-Hour ECO Mode: Energy-saving mode for extended battery life.
• Nwụnye na-agbanwe agbanwe: Supports magnetic wall mount and desk stand options with cable management.

Ngwa na njikwa

Familiarize yourself with the device's components and control buttons as illustrated below:

Foto 1: Inkbird 10-in-1 Air Quality Monitor with labeled components and control buttons.

• 1. ECO Mode & Power On Button: Press and hold to power on/off. Short press to toggle ECO mode.
• 2. Upper & WiFi Button & Backlight: Used for navigation, initiating WiFi connection, and adjusting backlight.
• 3. Lower & Alarm & °C/°F Switch: Used for navigation, setting alarms, and switching temperature units.
• 4. Set Button & Warning Light Bar: Used to enter settings menu. The light bar indicates air quality status.
• 5. Tọgharia bọtịnụ: Recessed button to reset the device (use a pin).
• 6. Nchaji ọdụ ụgbọ mmiri: USB-C port for power and charging.

3. Nhazi

3.1 Initial Charging and Power On

1. Connect the provided USB-C cable to the charging port (6) on the monitor and plug the other end into a compatible USB power adapter (not included).
2. Allow the device to charge fully before first use, or keep it connected for continuous power. The built-in 2700mAh Li-Po battery provides up to 10 hours of operation in ECO mode.
3. Press and hold the ECO Mode & Power On button (1) for a few seconds until the display illuminates.

Foto 2: The Inkbird Air Quality Monitor connected via USB-C for charging or continuous power.

3.2 WiFi Connection and App Setup

To enable remote monitoring and data logging, connect your monitor to the INKBIRD app via WiFi.

1. Download the INKBIRD app from your smartphone's app store (iOS or Android).
2. Register or log in to your INKBIRD account.
3. On the monitor, press and hold the Upper & WiFi Button (2) to enter WiFi pairing mode. The WiFi icon on the display will flash.
4. In the INKBIRD app, follow the on-screen instructions to add a new device. Ensure your phone is connected to a 2.4GHz WiFi network.
5. Once connected, the WiFi icon on the monitor's display will become solid. You can now monitor air quality remotely and access historical data.

Foto 3: Remote monitoring via the INKBIRD app, showing historical data graphs.

3.3 Ntinye

For optimal performance, place the monitor in a central location within the room you wish to monitor, away from direct airflow from vents, windows, or doors. Avoid placing it near heat sources, strong electromagnetic fields, or in areas with high humidity unless specifically monitoring those conditions.

4. Ntuziaka ọrụ

4.1 Ịghọta ihe ngosi

The 6.1-inch IPS display provides a clear overview of all monitored parameters. The display can be customized with six different modes. The main screen typically shows:

• Okpomọkụ (TEMP): In °C or °F.
• Humidity (HUMI): Dị ka pasenttage.
• CO2: In parts per million (ppm).
• HCHO: Formaldehyde concentration in mg/m³.
• TVOC: Total Volatile Organic Compounds in mg/m³.
• PM2.5: Particulate Matter 2.5 in μg/m³.
• PM10: Particulate Matter 10 in μg/m³.
• AQI: Air Quality Index.
• Oge na ụbọchị: Oge ugbu a na ụbọchị.

Foto 4: The monitor's display showing all 10 air quality parameters simultaneously.

4.2 Interpreting Air Quality Levels

The monitor provides visual indicators and comfort levels for key parameters to help you quickly assess air quality.

Foto 5: Comfort level indicators for CO2, PM2.5, and AQI, with corresponding color codes and ranges.

4.3 Ntọala Mkpu

The monitor features a dual alarm mechanism (light and sound) that activates when air quality parameters exceed user-defined thresholds. You can set personalized safety limits for CO2, PM2.5, and AQI.

1. Press the Set Button (4) to enter the settings menu.
2. Use the Upper (2) and Lower (3) buttons to navigate to the alarm settings for CO2, PM2.5, or AQI.
3. Press the Set Button (4) again to select the parameter and adjust its threshold using the Upper (2) and Lower (3) buttons.
4. Confirm your selection by pressing the Set Button (4).

Foto 6: The monitor indicating high CO2 and AQI levels, triggering the dual alarm mechanism.

Nhazi 4.4 CO2

For accurate CO2 readings, periodic calibration is recommended. The monitor supports easy CO2 calibration.

1. Place the monitor in a well-ventilated outdoor area for at least 10 minutes to ensure ambient CO2 levels are stable (approximately 400-450 ppm).
2. Refer to the device's on-screen menu or the INKBIRD app for the specific CO2 calibration option.
3. Follow the prompts to initiate calibration. The process may take a few minutes.

4.5 Ụdị ECO

To conserve battery life, short press the ECO Mode & Power On button (1) to toggle ECO mode. In this mode, the display may dim or update less frequently, but core detection functions continue.

5. Nlekọta

5.1 Nhicha

To ensure accurate readings and prolong the life of your monitor:

• Jiri akwa dị nro hichaa ngwaọrụ ahụ.
• Ejila ihe nhicha, ihe mgbaze, ma ọ bụ kemịkal siri ike mee ihe.
• Avoid getting moisture into the sensor openings or charging port.

5.2 Mmelite ngwanrọ

Inkbird provides free lifetime software updates for the monitor. Ensure your device is connected to WiFi and regularly check the INKBIRD app for available firmware updates to benefit from improved features and performance.

6. Nchọpụta nsogbu

If you encounter issues with your Inkbird Air Quality Monitor, refer to the following common problems and solutions:

If the problem persists, please contact Inkbird customer support for further assistance.

7. Nkọwapụta

Foto 7: Dimensions and weight of the Inkbird 10-in-1 Air Quality Monitor.

8. Akwụkwọ ikike na nkwado

Inkbird is committed to providing high-quality products and customer service.

• Lifetime Software Updates: Benefit from continuous improvements and new features through free lifetime software updates.
• 24/7 Air Quality Consultation: For any questions or concerns regarding your air quality monitor or indoor air quality, Inkbird offers 24/7 consultation services.

For technical support, warranty claims, or further assistance, please visit the official Inkbird website or contact their customer service team directly. Contact information can typically be found on the product packaging or the Inkbird official websaịtị.