Akwụkwọ ntuziaka onye ọrụ GIGABYTE Z890 AORUS PRO ICE

1. Okwu mmalite

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your GIGABYTE Z890 AORUS PRO ICE motherboard. This motherboard is designed to support Intel Core Ultra (Series 2) processors with an LGA 1851 socket, offering advanced features for high-performance computing.

Please read this manual thoroughly before attempting any installation or configuration to ensure proper setup and to prevent damage to your components.

2. Ozi nchekwa

• Kwụpụ mgbe ọ bụla eriri ọkụ na mpụga mgbidi tupu emetụ ihe ọ bụla n'ime akpa kọmputa ahụ aka.
• Yiri eriri nkwojiaka na-egbochi static ma ọ bụ na-emetụ ihe igwe gbadoro ụkwụ aka ugboro ugboro ka ọ na-agbapụta ọkụ eletrik tupu ị na-edozi ngwa.
• Jikwaa ihe ndị dị n'akụkụ ha iji zere imetụ akụkụ ndị nwere mmetụta aka.
• Gbaa mbọ hụ na ikuku ikuku dị n'ime akpa kọmputa gị iji gbochie ikpo oke ọkụ.
• Debe motherboard ka ọ ghara iru mmiri na oke okpomọkụ.

3. Ngwaahịa gafereview

The GIGABYTE Z890 AORUS PRO ICE motherboard is an ATX form factor board featuring the Intel Z890 chipset. It is engineered for optimal performance and reliability.

Akụkụ ndị bụ isi:

• Supports Intel Core Ultra Processors (Series 2) with LGA 1851 socket.
• DDR5 Compatible: 4 DIMM slots with XMP Memory Module Support, up to 256 GB.
• Robust Power Design: 16+1+2 phase, 90A Smart Power Stage.
• Advanced Thermals: VRM Thermal Armor and M.2 Thermal Guard for efficient heat dissipation.
• Extensive Connectivity: PCIe 5.0 slot, 5x M.2 Slots, Dual Thunderbolt 4 ports, Front USB-C, Sensor Panel Link.
• DIY Friendly Features: M.2 EZ-Latch, PCIe EZ-Latch, WIFI EZ-Plug, EZ-Debug Zone for simplified installation and troubleshooting.
• High-Speed Networking: WIFI7 and 5GbE LAN.

Ọgụgụ 3.1: N'elu-ala view of the GIGABYTE Z890 AORUS PRO ICE motherboard, showcasing the CPU socket, DIMM slots, PCIe slots, and M.2 heatsinks.

4. Ntọala na nwụnye

4.1 Nwụnye CPU

1. Chọta oghere LGA 1851 CPU na motherboard.
2. Mepee oghere oghere CPU wee bulie efere ibu ahụ.
3. Carefully align the notches on your Intel Core Ultra (Series 2) processor with the socket and gently place the CPU into the socket. Do not force it.
4. Mechie efere ibu ahụ ma chekwaa ya na lever.
5. Wụnye igwe nju oyi CPU dịka ntuziaka onye nrụpụta ya siri dị.

Nwụnye RAM 4.2 (DDR5)

1. Locate the four DDR5 DIMM slots. For optimal performance, refer to the motherboard's specific memory population guidelines (usually A2/B2 first for dual channel).
2. Mepee obere vidiyo na nsọtụ abụọ nke oghere DIMM.
3. Dozie notch na modul ebe nchekwa DDR5 na igodo dị na oghere DIMM.
4. Pịa ala na nsọtụ abụọ nke modul ebe nchekwa ruo mgbe obere vidiyo ga-adaba n'ebe.

4.3 M.2 SSD nwụnye

The motherboard features 5x M.2 slots with EZ-Latch for tool-less installation.

1. Locate an available M.2 slot, typically covered by a thermal guard. Remove the thermal guard if present.
2. Fanye M.2 SSD n'ime oghere na akuku ogo 30.
3. Gently push the M.2 SSD down until it is parallel with the motherboard.
4. Secure the M.2 SSD using the EZ-Latch mechanism.
5. Reinstall the M.2 Thermal Guard for optimal cooling.

Ntinye Kaadị PCIe 4.4

The motherboard includes a PCIe 5.0 x16 slot and other PCIe slots with EZ-Latch for graphics cards and expansion cards.

1. Mepee mkpachị njide na njedebe nke oghere PCIe achọrọ.
2. Align your PCIe card with the slot and press down firmly until it is fully seated and the retention clip snaps into place.
3. Jiri ịghasa chekwaa kaadị ahụ na chassis.

4.5 Njikọ na-enye ike

• Jikọọ njikọ ike isi ATX nke nwere pin 24 site na ọkọnọ ike gị gaa na isi okwu kwekọrọ na motherboard.
• Connect the 8-pin (or 4+4-pin) ATX 12V CPU power connector(s) to the motherboard.

4.6 Front Panel and Internal Connections

Refer to the diagram below for the location of various headers.

Figure 4.1: Motherboard layout with key internal and external port identifications.

• Ndị nkụnye eji isi mee panel: Connect your chassis' power button, reset button, power LED, and HDD activity LED to the F_PANEL header.
• USB nkụnye eji isi mee: Connect front panel USB 2.0, USB 3.2 Gen 1, and USB-C (20Gb/s) ports to the corresponding headers.
• ọdụ ụgbọ mmiri SATA: Connect SATA storage devices to the 4x SATA 6Gb/s ports.
• Ndị isi Fans: Connect case fans and CPU fan to the SYS_FAN and CPU_FAN headers.
• Isi okwu RGB: Connect compatible RGB lighting strips or devices to the RGB FUSION headers.

4.7 Rear I/O Panel Connections

Connect your peripherals to the rear I/O panel as shown in the diagram.

Ọgụgụ 4.2: Zuru ezu view of the rear input/output panel, showing USB ports, LAN, Wi-Fi antenna connectors, and audio jacks.

• ọdụ ụgbọ mmiri USB: Multiple USB 2.0, USB 3.2 Gen 1, and USB 3.2 Gen 2 ports are available.
• Thunderbolt 4 ọdụ ụgbọ mmiri: Dual Thunderbolt 4 ports with DP-Alt support.
• Ọdụ ụgbọ mmiri LAN: Connect your Ethernet cable to the 5GbE LAN port.
• Njikọ Wi-Fi Antenna: Attach the included Wi-Fi 7 antenna.
• Jacks ọdịyo: Jikọọ ọkà okwu, ekweisi, ma ọ bụ igwe okwu.
• BIOS Flashback Button: For updating BIOS without a CPU/RAM.

5. Ntuziaka ọrụ

5.1 Boot mbụ na ntọala BIOS / UEFI

1. After completing all hardware installations, connect your monitor, keyboard, and mouse.
2. Power on your system. During the POST (Power-On Self-Test) sequence, press the DEL key repeatedly to enter the BIOS/UEFI setup utility.
3. In the BIOS, you can configure system settings such as boot order, memory profiles (XMP), fan speeds, and storage configurations.
4. Save your changes and exit the BIOS to continue booting.

5.2 Nwụnye ọkwọ ụgbọala

Mgbe ị wụnyechara sistemụ arụmọrụ gị, ọ dị mkpa ịwụnye ọkwọ ụgbọ ala kachasị ọhụrụ maka akụrụngwa motherboard gị iji hụ na arụmọrụ na nkwụsi ike kacha mma.

• Insert the GIGABYTE driver CD/DVD (if included) or download the latest drivers from the official GIGABYTE websaịtị (www.gigabyte.com) for your specific motherboard model.
• Install chipset drivers, LAN drivers, Wi-Fi drivers, audio drivers, and any other relevant utility drivers.

5.3 Nwụnye sistemụ arụmọrụ

Follow the instructions provided by your operating system (e.g., Windows 10/11) for installation. Ensure your boot device (USB drive or DVD) is set as the primary boot option in the BIOS.

6. Nlekọta

6.1 Nhicha

• Jiri ikuku a na-akpọchi akpọchi hichaa uzuzu dị n'ime akpa kọmputa gị mgbe niile.
• Ensure fans and heatsinks are free from obstructions to maintain proper airflow.
• Gbanyụọ ma kwụpụ sistemu ahụ tupu ihicha ya.

6.2 Mmelite BIOS

GIGABYTE periodically releases BIOS updates to improve system stability, compatibility, and performance. Refer to the GIGABYTE website for the latest BIOS versions and update instructions. Use the Q-Flash or Q-Flash Plus utility for safe BIOS updates.

7. Nchọpụta nsogbu

7.1 Okwu nkịtị

• Enweghị ike: Check all power connections (24-pin ATX, 8-pin CPU, GPU). Ensure the power supply is switched on.
• Enweghị Ngosipụta: Verify monitor connection, ensure graphics card is properly seated, and try reseating RAM modules.
• Akwụsịghị / Mkpọka Sistemu: Check RAM seating, ensure CPU cooler is properly installed, update drivers, and check for overheating.
• Mgbapụ Boot: Clear CMOS (refer to motherboard manual for jumper location or remove battery for 30 seconds).

7.2 EZ-Debug Zone

The EZ-Debug Zone on the motherboard provides diagnostic LEDs that indicate the status of key components (CPU, DRAM, VGA, BOOT) during startup. If an issue occurs, the corresponding LED will remain lit, helping you identify the problematic component.

8. Nkọwapụta

9. Akwụkwọ ikike Ozi

The GIGABYTE Z890 AORUS PRO ICE motherboard comes with a Akwụkwọ ikike dị afọ 5. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official GIGABYTE warranty policy on their websaịtị.

10. Nkwado

For technical support, driver downloads, BIOS updates, and further product information, please visit the official GIGABYTE websaịtị:

www.gigabyte.com

You can also find FAQs and community forums on the support section of the websaịtị.