ZEBRONICS Pixie 5W Portable Bluetooth Speaker User Manual

1. Okwu mmalite

The ZEBRONICS Pixie is a compact 5W portable Bluetooth speaker designed for on-the-go audio. It supports Bluetooth v5.3 connectivity, Micro SD card playback, and features a built-in microphone for call functionality. The speaker also includes a True Wireless Stereo (TWS) function for connecting two Pixie speakers for a stereo experience and a convenient carry loop for portability.

2. Ihe ngwugwu

• ZEBRONICS Pixie Speaker - 1 unit

3. Ngwaahịa gafereview

Mara onwe gị na akụkụ na njikwa ọkà okwu.

Ọgụgụ 3.1: N'ozuzu view of the ZEBRONICS Pixie speaker, highlighting its compact design, control buttons, and integrated carry loop.

Ọgụgụ 3.2: Zuru ezu view of the speaker's control panel, featuring the power button in the center, flanked by volume decrease (-) and volume increase (+) buttons. The microphone is also visible.

Figure 3.3: This image shows the side of the speaker, clearly indicating the Type-C charging port and the slot for a Micro SD card.

Njikwa na ọdụ ụgbọ mmiri:

• Bọtịnụ Ike (ⓘ): Pịa ma jide ka ịgbanwuo/gbanyụọ ọkụ. Pịa obere oge iji kpọọ/kwụsịtụ egwu ma ọ bụ zaa/kwụsị oku.
• Bọtịnụ ala ala (-): Obere pịa ka ibelata olu. Pịa ogologo maka egwu gara aga.
• Bọtịnụ Elu Olu (+): Obere pịa ka iwelie olu. Pịa ogologo maka egwu ọzọ.
• Ụdị-C ọdụ ụgbọ mmiri: Maka ịchaji ọkà okwu.
• Oghere kaadị Micro SD: Maka ịkpọ ụda files directly from a Micro SD card.
• Igwe okwu: Maka oku na-enweghị aka.
• Ihe ngosi LED: Indicates charging status and Bluetooth pairing status.

4. Nhazi

4.1 Ịchaji ọkà okwu

Before initial use, fully charge the speaker. Use a Type-C cable to connect the speaker's charging port to a USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status and turn off once fully charged. A full charge provides up to 7 hours of playback at 50% volume.

Nyocha 4.1: N'eluview of speaker features including Type-C charging and built-in rechargeable battery.

4.2 Gbanyụọ ma ọ bụ gbanyụọ

• Iji gbanye: Press and hold the Power button (ⓘ) for approximately 3 seconds until you hear an audible prompt and the LED indicator lights up.
• Iji gbanyụọ: Press and hold the Power button (ⓘ) for approximately 3 seconds until you hear an audible prompt and the LED indicator turns off.

5. Ntuziaka ọrụ

5.1 Njikọ Bluetooth

1. Ensure the speaker is powered on and the LED indicator is blinking, indicating it is in pairing mode.
2. Na ekwentị mkpanaaka gị (ama, mbadamba, wdg), mee ka Bluetooth rụọ ọrụ.
3. Chọọ maka Ngwaọrụ Bluetooth dị.
4. Select "ZEB-PIXIE" from the list of devices.
5. Once paired, the LED indicator will stop blinking and remain solid, and you will hear a confirmation tone.

5.2 Ezi Ikuku Stereo (TWS) Ọrụ

The TWS function allows you to connect two ZEBRONICS Pixie speakers together for a stereo audio experience.

1. Ensure both Pixie speakers are powered off.
2. Ike na ma ọkà okwu n'out oge.
3. Double-press the Power button on one of the speakers. It will search for the other speaker.
4. Once connected, you will hear a confirmation tone, and the LED indicators on both speakers will indicate a successful TWS connection.
5. Now, connect your mobile device to one of the speakers via Bluetooth as described in section 5.1. Audio will play through both speakers in stereo.

5.3 Micro SD kaadị ịkpọghachi

Iji kpọọ egwu ozugbo site na kaadị Micro SD:

1. Insert a Micro SD card (up to 32GB) with MP3 audio files into the Micro SD card slot on the speaker.
2. Ọkà okwu ahụ ga-achọpụta kaadị ahụ ozugbo wee malite ịkpọ egwu.
3. Use the Volume Up (+) and Volume Down (-) buttons for track navigation (long press) and volume control (short press).

5.4 Ọrụ oku

When connected to your smartphone via Bluetooth, the speaker can be used for hands-free calls.

Figure 5.1: The speaker positioned near a smartphone, demonstrating its integrated call function for hands-free communication.

• Oku azaa: Short press the Power button (ⓘ) when an incoming call rings.
• Oku ngwụcha: Short press the Power button (ⓘ) during a call.
• Jụ oku: Press and hold the Power button (ⓘ) for 2 seconds when an incoming call rings.

6. Nlekọta

• Jiri ákwà dị nro ma kpọọ nkụ hichaa ọkà okwu ahụ. Ejila kemịkal siri ike ma ọ bụ ihe nhicha na-eme ka ọ dị nro.
• Zere ikpughe onye na-ekwu okwu n'ebe okpomọkụ dị oke elu, anwụ kpọmkwem, ma ọ bụ oke iru mmiri dị elu.
• Do not immerse the speaker in water as it is not waterproof.
• Chekwaa ọkà okwu n'ebe dị jụụ ma kpọọ nkụ mgbe ọ naghị eji ya ogologo oge.
• Charge the speaker regularly to maintain battery health, even if not used frequently.

7. Nchọpụta nsogbu

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

Maka ozi gbasara akwụkwọ ikike na nkwado teknụzụ, biko gaa na ZEBRONICS gọọmentị website or contact their customer service. The manufacturer is AJZ Industries Pvt. Ltd.

Additional protection plans may be available from your retailer.