Akwụkwọ ntuziaka onye ọrụ Cherry KW 7100 Mini Multi-Device Compact Keyboard

1. Okwu mmalite

Thank you for choosing the Cherry KW 7100 Mini Multi-Device Compact Keyboard. This manual provides essential information for setting up, operating, and maintaining your new keyboard. Designed for versatility and portability, this keyboard offers seamless connectivity across multiple devices.

2. Kedu ihe dị na Igbe ahụ

• Cherry KW 7100 Mini Multi-Device Compact Keyboard
• USB-C to USB-A Charging/Connection Cable
• 2 x AAA batrị
• 2.4 GHz Wireless Nano Receiver (stored magnetically in the keyboard)
• Akpa na-ebu
• Akwụkwọ ntuziaka

Ọgụgụ 1: N'elu-ala view of the Cherry KW 7100 Mini Keyboard.

3. Nhazi

3.1. Ntinye batrị

1. Chọta ebe batrị dị n'okpuru ala ahụigodo.
2. Slide mepee mkpuchi batrị batrị.
3. Fanye batrị AAA abụọ ahụ, na-ahụ polarity ziri ezi (+/-).
4. Mechie mkpuchi nke batrị batrị nke ọma.

Figure 2: Underside of the keyboard with the battery compartment.

3.2. Jikọọ ahụigodo

The Cherry KW 7100 Mini supports three connection methods: Bluetooth, 2.4 GHz Wireless, and Wired USB-C.

3.2.1. Bluetooth Connection (Up to 3 Devices)

1. Gbanyụọ ahụigodo site na iji mgba ọkụ dị n'akụkụ.
2. Press and hold one of the Bluetooth channel keys (F1, F2, or F3) for 3-5 seconds until the corresponding LED indicator blinks rapidly. This indicates pairing mode.
3. On your device (laptop, smartphone, tablet), navigate to Bluetooth settings and search for available devices.
4. Select "Cherry KW 7100" from the list to pair. The LED will stop blinking and remain solid for a few seconds upon successful connection.
5. Repeat for up to two additional devices using the other Bluetooth channel keys (F1, F2, or F3).

3.2.2. 2.4 GHz Njikọ ikuku

1. Locate the 2.4 GHz wireless nano receiver, typically stored magnetically in a slot on the underside of the keyboard.
2. Insert the nano receiver into an available USB-A port on your computer.
3. Turn on the keyboard using the power switch. The keyboard should automatically connect to the receiver.

3.2.3. Wired USB-C Connection

1. Connect one end of the provided USB-C cable to the USB-C port on the keyboard.
2. Connect the other end of the USB-C cable to an available USB-A port on your computer.
3. The keyboard will function as a wired keyboard.

4. Na-arụ ọrụ ahụigodo

4.1. Ịgbanwe n'etiti ngwaọrụ ejikọrọ

To switch between paired Bluetooth devices, simply press the corresponding Bluetooth channel key (F1, F2, or F3) that your device is paired to. The keyboard will automatically connect to the selected device.

4.2. Function Keys (FN)

The keyboard features a dedicated FN key, typically located near the right Shift key. This key, in combination with other keys, activates secondary functions such as media controls, screen brightness, and other system commands. Refer to the keycap legends for specific FN key combinations.

4.3. LED egosi

LED indicators on the keyboard provide information about its status:

• Bluetooth Channel LEDs (F1, F2, F3): Indicate the currently active Bluetooth connection or pairing mode.
• LED mkpọchi mkpuchi: Illuminates when Caps Lock is active.
• Ọkwa batrị LED: Na-egosi ọkwa batrị dị ala.

4.4. Ụkwụ na-agbanwe agbanwe

The keyboard is equipped with stable, fold-out feet on the underside. These allow you to adjust the typing angle for improved ergonomics and comfort.

Ọgụgụ 3: N'akuku view of the keyboard, highlighting its slim profile.

Foto 4: Akụkụ view showing the adjustable feet extended for an ergonomic typing angle.

5. Nlekọta

5.1. Nhicha

To clean your keyboard, gently wipe the keycaps and surface with a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaning solution. Avoid excessive moisture and do not spray cleaners directly onto the keyboard.

5.2. Nchekwa

When not in use, especially during travel, store the keyboard in its included carrying case to protect it from dust, scratches, and minor impacts.

Figure 5: The keyboard stored in its protective carrying case.

6. Nchọpụta nsogbu

6.1. Ahụigodo Anaghị ejikọta

• Gbaa mbọ hụ na agbanyere ahụigodo.
• Lelee batrị ma dochie ha ma ọ bụrụ na ọ dị mkpa.
• For Bluetooth, ensure the correct channel (F1, F2, or F3) is selected and the keyboard is in pairing mode (blinking LED).
• For 2.4 GHz wireless, ensure the nano receiver is securely plugged into a USB-A port.
• Try connecting via the USB-C cable to rule out wireless issues.
• Malitegharịa ekwentị gị wee nwaa ijikọ ọzọ.

6.2. Igodo anaghị aza

• Check the connection as described above.
• Gbaa mbọ hụ na ọnweghị ihe mkpofu etinyere n'okpuru igodo.
• If using a wired connection, try a different USB port or cable.

6.3. Ndụ Batrị Dị Mkpirikpi

• Ensure you are using fresh, high-quality AAA batteries.
• Turn off the keyboard when not in use to conserve battery power.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

This product is covered by Cherry's standard manufacturer warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Cherry websaịtị ma ọ bụ kpọtụrụ nkwado ndị ahịa ha ozugbo.

Onye nrụpụta: cherị

Websaịtị: www.chinyere.de