Ngwaahịa gafereview
The Imagebon Portable Apple Carplay Screen is a versatile in-car entertainment and navigation system designed to enhance your driving experience. It features wireless Apple CarPlay and Android Auto, a 4K dash cam with ADAS, a 1080P backup camera, GPS navigation, and multiple audio output options.
Atụmatụ igodo
- Wireless Apple CarPlay/Android Auto: Seamless integration for navigation, calls, music, and intelligent assistants.
- Dual Dash Cam with Ultra HD 4K+1080P Recording: Front 4K and rear 1080P recording with motion detection and emergency lock. Supports up to 128GB storage for loop recording.
- Mmalite ngwa ngwa: 5-second boot-up with a 4-core chip for a smooth experience.
- IPS HD 10.26'' Touch Screen: Large, high-definition display for comfortable viewing and easy control.
- Phone Mirroring and Enhanced Audio: AirPlay/Miracast function for screen projection and 4 audio output modes (speaker, CarPlay/Auto, FM, AUX).
Foto 1: N'ihu view of the Imagebon Portable Carplay Screen displaying its interface.
Nyocha 2: N'eluview of key features and functionalities of the 10.26" Wireless Carplay Stereo.
Ntuziaka nhazi
Follow these steps to properly set up your Imagebon Portable Carplay Screen.
Ihe ngwugwu
Before installation, ensure all components are present:
Figure 3: Included accessories and components in the product package.
- Portable Carplay Screen Unit
- Igwefoto azụ
- Chaja ụgbọ ala
- GPS Antenna (required for ADAS features)
- eriri AUX
- 3M Sticky Mount
- Ugwu iko mmiri
- 64 GB TF Card (MicroSD)
- Akwụkwọ ntuziaka (akwụkwọ a)
Nhọrọ nkwụnye
The device offers two mounting options for flexible placement:
- Ugwu Suction Cup: Ideal for windshield mounting. Ensure the surface is clean and dry before attaching. Press down firmly to secure.
- 3M Sticky Mount: Suitable for dashboard mounting. Clean the dashboard surface thoroughly. Peel off the adhesive backing and firmly press the mount onto the desired location. Allow sufficient time for the adhesive to bond before attaching the device.
Figure 4: Available mounting options for the device.
Ijikọ ngwaọrụ
- Njikọ ike: Connect the car charger to the device's USB-C/Buck line port (DC12-24V/2.5A) and plug the other end into your car's cigarette lighter socket.
- Nwụnye igwefoto n'azụ: Connect the rear camera cable to the AV IN port on the device. Route the cable neatly to the rear of your vehicle and mount the camera in a suitable position (e.g., above the license plate or on the rear window).
- GPS Antenna (Optional but Recommended): Connect the GPS antenna to the GPS 3.5 Jack for ADAS functionality and improved navigation accuracy.
- Mbupụ ọdịyo (Nhọrọ):
- AUX Audio: Connect the provided AUX cable from the device's AUX Audio Input to your car's AUX input port for direct audio transmission.
- Nyefee FM: Configure the FM frequency on the device and tune your car radio to the same frequency to transmit audio wirelessly.
- Bluetooth: Pair the device with your car's Bluetooth system for wireless audio.
Ọgụgụ 5: N'azụ view of the device with labeled ports for connections.
Ntuziaka ọrụ
Wireless CarPlay / Android Auto Connection
- Gbanwuo ngwaọrụ.
- On the device screen, select "CarPlay" or "Android Auto".
- On your smartphone, enable Wi-Fi and Bluetooth. Chọọ maka the device's Bluetooth name (e.g., "XXXX_XXXX") and pair.
- Confirm the pairing request on both your phone and the device.
- Once connected, your phone's CarPlay or Android Auto interface will appear on the screen.
Figure 6: Wireless CarPlay and Android Auto connection steps.
Phone Mirroring (AirPlay / Miracast)
The device supports wireless AirPlay (for iOS) and Miracast (for Android) to mirror your phone's screen.
- On the device screen, select "AirPlay" or "Miracast".
- On your smartphone, enable Wi-Fi.
- For iOS (AirPlay): Open Control Center, tap Screen Mirroring, and select the device's name.
- For Android (Miracast): Go to your phone's casting/screen mirroring settings (names may vary, e.g., Smart View, Wireless Display) and select the device.
Figure 7: AirPlay screen mirroring connection steps.
Figure 8: Miracast screen mirroring connection steps.
Dash Cam Operation and ADAS
The integrated dual dash cam records continuously. Footage is saved to the inserted TF card with seamless loop recording.
- Edekọ: The dash cam automatically starts recording when the device powers on.
- Viewna Footage: Access recorded videos and photos through the "Dash Cam" or "File" application on the device's main screen.
- ADAS (Advanced Driver Assistance Systems): With the GPS antenna connected, the system provides warnings for Front Vehicle Starts Moving, Forward Collision, and Lane Departure.
Figure 9: ADAS features for enhanced driving safety.
Figure 10: Seamless loop recording functionality with included 64GB MicroSD card.
Figure 11: High-resolution recording from both front (4K) and rear (1080P) cameras.
Ụdị mmepụta ọdịyo
The device supports multiple audio output methods to integrate with your car's audio system:
- BT Audio: Connect your phone to the device via Bluetooth. The device will then transmit audio to your car's Bluetooth system.
- AUX Audio: Plug the AUX cable into the device's AUX port and your car's AUX input. Select AUX mode on your car stereo.
- Audio FM: Select an unused FM frequency on the device and tune your car radio to the same frequency.
- Ọdịda ala nna: Use the device's built-in speaker for audio output.
Figure 12: Various audio output options for connecting to your car's sound system.
App Control (Roadcam)
Manage your dash cam recordings and GPS tracks via the Roadcam app on your smartphone. Connect your phone to the device's Wi-Fi network to use the app.
Figure 13: Control and manage dash cam features via the Roadcam mobile application.
Download the Roadcam app: Roadcam App (iOS)
Nlekọta
- Nhicha: Use a soft, dry cloth to clean the screen and exterior of the device. Avoid using abrasive cleaners or solvents.
- Okpomọkụ: Do not expose the device to extreme temperatures (hot or cold) for extended periods, as this may affect its performance and lifespan.
- Mmelite femụwe: Lelee nke onye nrụpụta oge ụfọdụ website or app for any available firmware updates to ensure optimal performance and new features.
- Kaadị TF: Format the TF card regularly (e.g., once a month) to prevent data corruption and ensure smooth loop recording. Back up any important footage tupu nhazi.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ngwaọrụ anaghị agbanwu ọkụ. | No power from car charger; loose connection. | Check car charger connection to both device and car's cigarette lighter. Ensure car's power outlet is functional. |
| CarPlay/Android Auto anaghị ejikọ. | Bluetooth/Wi-Fi not enabled on phone; incorrect pairing. | Ensure phone's Bluetooth and Wi-Fi are on. Forget device in phone's Bluetooth settings and re-pair. Restart both device and phone. |
| Enweghị mmepụta ọdịyo. | Incorrect audio mode selected; volume too low. | Check selected audio output mode (AUX, FM, Bluetooth). Adjust volume on both the device and car stereo. Ensure AUX cable is fully inserted. |
| Dash cam not recording. | TF card full or corrupted; TF card not inserted. | Ensure TF card is properly inserted. Format the TF card (back up data first). Replace TF card if corrupted. |
| ADAS features not working. | GPS antenna not connected or faulty. | Ensure GPS antenna is securely connected to the device. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Akụkụ ngwaahịa | 3.54 x 9.45 x 6.69 sentimita asatọ |
| Ibu Ibu | 3.34 pound |
| Nọmba nlereanya | 1026-R8-XLDPro |
| OS | Android |
| Nkwukọrịta ikuku | Bluetooth, WiFi |
| Ntinye Interface mmadụ | Ihuenyo mmetụ aka |
| Mkpebi nyocha | 4K (Front Camera) |
| Onye nrụpụta | Imagebon |
| Teknụzụ Njikọta | Ikuku |
| Ngwa dakọtara | Ekwentị mkpanaaka |
| Ụdị njikọ | USB Ụdị-C |
| Ọnụọgụ nke ọwa | 4 |
| Mpụta Wattage | 180 Watt |
| Ọrụ ịntanetị akwadoro | Netflix, Spotify, YouTube, TikTok |
| Usoro njikwa | Metụ aka |
| Ụdị mmepụta ọdịyo | Ndị na-ekwu okwu |
Figure 14: Phone casting and mirroring capabilities of the device.
Akwụkwọ ikike na nkwado
Imagebon is committed to delivering innovative and high-quality smart devices. For any questions or issues, please contact our support team.
- Email Nkwado Ndị Ahịa: Imagebons@outlook.com
- Our team is available 24/7 to assist you.
- For additional information, you may refer to the official User Manual PDF: Akwụkwọ ntuziaka onye ọrụ (PDF)
Ajụjụ A na-ajụkarị (FAQ)
- How did Imagebon get its start? Imagebon was founded by tech enthusiasts with experience in the smart video device industry. In 2022, the Imagebon team began producing their own brand of smart video devices using their supply chain resources and expertise, focusing on delivering innovative and high-quality products.
- What makes Imagebon products unique? The Imagebon team has deep roots in the intelligent market and utilizes the latest 4-core intelligent chips to maintain strict quality standards, relentlessly pursuing innovation to meet the evolving needs of customers.
Figure 15: Imagebon's dedicated customer support team.
