1. Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Commax CL-302i Lamp. Please read this manual thoroughly before attempting to install or operate the device to ensure proper function and safety. Keep this manual for future reference.
2. Ngwaahịa gafereview
The Commax CL-302i is an accessory lamp designed for integration into various systems, providing illumination with a color temperature of 3000 Kelvin. Its compact design allows for discreet installation.
Foto 2.1: N'ihu view of the Commax CL-302i Lamp. This image displays the external casing nke lamp, which is white and features a minimalist design with the "COMMAX" logo visible on the lower right.
Foto 2.2: Ime view of the Commax CL-302i Lamp, showing the circuit board. The image reveals the internal electronic components, including several small LEDs and other circuitry mounted on a green PCB, indicating the lamp's internal structure.
Foto 2.3: Close-up of the Commax CL-302i Lamp circuit board. This detailed view clearly shows the model number "CL-302I(N1)" and the manufacturing date "2018.03.06". It also highlights the wiring connection points labeled "1: 24V+", "2: RED", and "3: GREEN", which are crucial for installation.
Foto 2.4: Package contents of the Commax CL-302i Lamp. The image displays the lamp unit, partially wrapped in bubble wrap, alongside a small plastic bag containing wiring and a screw, indicating the included installation accessories.
3. Ntọala na nwụnye
Proper installation is crucial for the safe and effective operation of the Commax CL-302i Lamp. It is recommended that installation be performed by a qualified professional.
3.1 Nchekwa nchekwa
- Always disconnect power to the installation area before beginning any wiring.
- Ensure the power supply matches the lamp's requirements (24V DC).
- Ekpughela ihe lamp ruo mmiri ma ọ bụ oke okpomọkụ.
3.2 Nzọụkwụ nwụnye
- Ịkwapu: Carefully remove all components from the packaging. Verify that all parts, including the lamp unit, wiring, and mounting hardware, are present as shown in Figure 2.4.
- Ịkwanye: Họrọ ebe kwesịrị ekwesị maka lamp. Ndị lamp is designed for a center position installation. Secure the lamp unit using the provided mounting hardware.
- Njikọ waya: Refer to Figure 2.3 for wiring details.
- Jikọọ 24V + wire to the positive terminal of your 24V DC power supply.
- Jikọọ Uhie wire to the designated control input (if applicable).
- Jikọọ GREEN wire to the designated control input or ground (if applicable).
Note: Ensure all connections are secure and insulated to prevent short circuits.
- Nwalee: Once all connections are made, restore power to the installation area and test the lamp's ọrụ.
4. Ọrụ
The Commax CL-302i Lamp functions as an accessory light. Its operation is typically controlled by an external switch or integrated system to which it is connected. Once properly installed and powered, the lamp will illuminate when activated by the controlling system.
5. Nlekọta
The Commax CL-302i Lamp requires minimal maintenance to ensure long-term performance.
- Nhicha: Na-ehichapụ mpụta nke l mgbe ụfọdụamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Nyocha: Regularly inspect the wiring and connections for any signs of wear, damage, or loose contacts. Address any issues promptly.
- Ndochi akụkụ: Ndị lamp utilizes integrated LED components and is not designed for user-serviceable bulb replacement. If the lamp malfunctions, consult the troubleshooting section or contact support.
6. Nchọpụta nsogbu
If you encounter issues with your Commax CL-302i Lamp, rụtụ aka na nsogbu na ngwọta ndị a na-ahụkarị:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Lamp adịghị enye ọkụ. | Enweghị ọkụ. Wiring na -ezighi ezi. Emejọrọ lamp otu. | Check if power is supplied to the circuit. Verify wiring connections according to Figure 2.3. If power and wiring are correct, the unit may be faulty; contact support. |
| Lamp flickers ma ọ bụ dims. | Ọkụ ọkụ anaghị akwụsi ike. Njikọ rụrụ arụ. ekpo oke ọkụ. | Gbaa mbọ hụ na isi iyi ike 24V DC kwụsiri ike. Lelee njikọ wiwi niile maka ike. Gbaa mbọ hụ na ikuku ikuku zuru oke gburugburu lamp. |
Ọ bụrụ na nsogbu ahụ dịgidere mgbe ị nwara azịza ndị a, biko kpọtụrụ nkwado ndị ahịa.
7. Nkọwapụta
| Nlereanya | CL-302i |
| Onye nrụpụta | Commax |
| Seller Brand | N'ozuzu |
| Okpomọkụ agba | 3000 Kelvin |
| Ọnụ ngwungwu ihe | 1 |
| Ọnọdụ | Ebe etiti |
| ASIN | B09NZMSXZ2 |
| Ụbọchị mbụ dị | Julaị 25, 2023 |
8. Akwụkwọ ikike na nkwado
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Specific warranty terms may vary depending on the region and point of sale.
If you require technical assistance or have questions not covered in this manual, please reach out to the manufacturer or authorized service center.
