Weiser SmartCode 5 Lever Electronic Lock

1. Okwu mmalite

This manual provides comprehensive instructions for the Weiser 9GED14550-005 SmartCode 5 Lever Electronic Lock with Z-Wave technology. This electronic lever lock offers keyless entry, enhanced security, and smart home integration capabilities. Please read this guide thoroughly before installation and operation to ensure proper function and longevity of your lock.

Image 1: Weiser SmartCode 5 Lever Electronic Lock in Satin Nickel finish. This image displays the complete lock assembly, including the exterior keypad and interior lever components.

2. Akụrụngwa Ngwaahịa

• Ntinye enweghị igodo: Backlit keypad for convenient code access.
• Z-Wave 500 Home Connect Technology: Enables wireless communication with other smart home devices.
• Nnweta dị anya: Remotely check lock status, lock/unlock, and receive notifications via web-enabled devices.
• Ndakọrịta Smart Home: Works with Z-Wave certified controllers, including Samsung SmartThings and Wink for Amazon Alexa integration.
• SmartKey Re-key Technology: Allows re-keying the lock to a new key in seconds.
• Mkpọchi otu mmetụ: Motorized locking with a single touch.
• Mkpọchi akpaaka: Customizable automatic re-locking after 30 seconds for added security.
• Koodu onye ọrụ: Supports up to 30 unique user access codes and 1 master code.
• Ogologo oge: ANSI/BHMA Grade 2 certified.
• Nwụnye dị mfe: Designed to fit most standard residential door preparations (1-3/8" to 1-3/4" door thickness, adjustable 2-3/8" or 2-3/4" backset, 2-1/8" cross bore).
• Nchekwa: Full 128-bit encryption.

3. Ihe ngwugwu

Before beginning installation, verify that all components are present. The package typically includes:

• Mgbakọ ahụ igodo mpụta
• Mgbakọ Lever dị n'ime
• Latch
• Efere efere
• Ngwaike mgbakwasa
• Installation Guide / Drilling Template

Note: 4 AA alkaline batteries are required and sold separately.

4. Ntuziaka nwụnye

Installation of the SmartCode 5 Lever lock is designed to be straightforward, typically requiring only a Phillips head screwdriver. Ensure your door meets the following specifications:

• Ọkpụrụkpụ ọnụ ụzọ: 1-3/8" to 1-3/4" (35 mm - 44 mm)
• Cross Bore: 2-1/8" (54 mm)
• Latch Backset: Adjustable 2-3/8" or 2-3/4" (60 mm or 70 mm)
• Aka n'ọnụ ụzọ: Universal (can be installed on left or right-handed doors)

Nzọụkwụ nwụnye:

1. Kwadebe Ọnụ ụzọ: If necessary, use the provided template to drill holes. Ensure the door is properly aligned and the existing latch bore is clear.
2. Wụnye Latch: Insert the latch into the door edge and secure it with screws. Ensure the latch bolt faces the door frame.
3. Wụnye Mgbakọ igodo mpụta: Route the cable through the cross bore and position the exterior keypad assembly on the door.
4. Wụnye Mgbakọ ime ụlọ: Connect the cable from the exterior assembly to the interior assembly. Secure the interior assembly to the door using the provided mounting screws.
5. Wụnye Levers: Attach the interior and exterior levers according to the instructions, ensuring they operate smoothly.
6. Wụnye batrị: Insert 4 new AA alkaline batteries into the battery pack.
7. Mee usoro inye ọnụ ụzọ: This step is crucial for the lock to learn the orientation of your door. Follow the specific instructions in your physical installation guide to ensure correct operation.

5. Initial Setup & Programming

After installation, the lock requires initial setup, including setting the Master Code and User Codes.

Koodu Master:

The Master Code is a critical security feature. It is used to add, delete, and modify User Codes and other lock settings. It does not unlock the door. It is highly recommended to create a Master Code immediately after installation.

Koodu onye ọrụ:

The lock supports up to 30 unique 4-8 digit User Codes for family members, guests, or service personnel.

Programming Steps (General):

1. Tọọ koodu Master: Refer to your specific programming guide for the sequence to establish your Master Code.
2. Tinye koodu onye ọrụ:
   • Tinye koodu Nna-ukwu gị.
   • Press the Program button (usually located on the interior assembly).
   • Tinye koodu onye ọrụ ọhụrụ nke nwere ọnụọgụgụ 4-8.
   • Press the Lock button.
   • Test the new User Code to ensure it unlocks the door.
3. Hichapụ koodu njirimara: Follow the specific instructions in your programming guide, typically involving the Master Code and the User Code to be deleted.

6. Z-Wave Integration

The SmartCode 5 Lever lock features Z-Wave 500 Home Connect Technology, allowing it to integrate with compatible smart home systems.

Enrollment (Adding to Z-Wave Network):

To add the lock to your Z-Wave network, initiate the 'Add Device' or 'Inclusion' process on your Z-Wave controller/hub. Then, follow the lock's specific instructions to put it into inclusion mode (often by pressing the Program button once). The lock will communicate with the controller to join the network.

Exclusion (Removing from Z-Wave Network):

To remove the lock from a Z-Wave network, initiate the 'Remove Device' or 'Exclusion' process on your Z-Wave controller/hub. Then, follow the lock's specific instructions to put it into exclusion mode.

Functionality with Z-Wave:

• Remotely lock and unlock the door.
• Check the current lock status (locked/unlocked).
• Receive notifications for lock activity (e.g., door locked/unlocked, low battery).

The lock is compatible with Z-Wave certified controllers, including those that support Amazon Alexa integration via Samsung SmartThings and Wink.

7. Ọrụ

Operating your SmartCode 5 Lever lock is simple and intuitive.

Ịkpọchi ụzọ:

• From Exterior: Press the Lock button on the keypad. The motorized deadbolt will extend.
• From Interior: Rotate the interior thumb turn to the locked position.

Ịkpọghee ụzọ:

• From Exterior: Enter a valid 4-8 digit User Code on the keypad. The motorized deadbolt will retract.
• From Interior: Rotate the interior thumb turn to the unlocked position.

Mkpọchi akpaaka:

If enabled, the lock will automatically re-lock approximately 30 seconds after being unlocked from the exterior. This feature provides peace of mind, ensuring your door is always secured.

8. Nlekọta

Proper maintenance ensures the longevity and reliable operation of your electronic lock.

Ngbanwe batrị:

The lock requires 4 AA alkaline batteries. When the batteries are low, the lock will typically provide an audible and/or visual low battery warning. Replace all four batteries simultaneously with new, high-quality alkaline batteries. Avoid using rechargeable batteries, as they may not provide sufficient voltage.

Nhicha:

Clean the keypad and lock body with a soft, damp ákwà. Zere iji ihe nhicha, ihe mgbaze, ma ọ bụ ihe ndị na-agbaze kemịkalụ, n'ihi na ihe ndị a nwere ike imebi ihe ndị dị na ya na ihe ndị dị na eletrọniki.

SmartKey Re-keying:

If you need to re-key your lock to a new key, follow the specific instructions provided with your SmartKey tool. This process allows you to re-key the lock yourself in seconds without removing it from the door.

9. Nchọpụta nsogbu

If you encounter issues with your lock, refer to the following common troubleshooting steps:

• Mkpọchi anaghị aza: Check that the batteries are correctly installed and fully charged. Replace batteries if necessary. Ensure all cables are securely connected inside the interior assembly.
• Koodu anaghị arụ ọrụ: Verify that the Master Code is set. Ensure User Codes are entered correctly and are active. Try deleting and re-adding the User Code.
• Nsogbu Njikọ Z-Wave: Ensure your Z-Wave controller/hub is powered on and within range of the lock. Try performing a Z-Wave exclusion and then re-inclusion process.
• Grinding Noise / Latch Not Extending: This can indicate door misalignment or an obstruction. Check that the door frame and strike plate are properly aligned with the latch. Ensure the latch operates freely without resistance.
• Ahụigodo anaghị agba ọkụ: Check battery power. If batteries are new, ensure they are inserted with correct polarity.

For more detailed troubleshooting, consult the full product manual or contact Weiser customer support.

10. Nkọwapụta

11. Akwụkwọ ikike & Nkwado

Weiser stands behind the quality of its products.

Ozi akwụkwọ ikike:

• Mechanical & Finish Warranty: Oge ndụ
• Electronics Warranty: Otu afọ

These warranties apply to the original residential user of the product. Please retain your proof of purchase for warranty claims.

Nkwado ndị ahịa:

For detailed warranty terms, technical assistance, or further support, please visit the official Weiser website or contact their customer service department. Contact information can typically be found on the Weiser websaịtị ma ọ bụ na nkwakọ ngwaahịa.