Okwu mmalite
This manual provides essential information for the safe and efficient use of your IKEA Navlinge LED Clamp Spotlight. Please read these instructions carefully before installation and operation, and retain them for future reference.
Image: The IKEA Navlinge LED Clamp Spotlight, featuring its adjustable head and clamp mechanism, shown in white.
Ozi nchekwa
- Kwupu ike mgbe niile tupu ihicha ma ọ bụ rụkwaa ya.
- Ejila ma ọ bụrụ na eriri ma ọ bụ plọg mebiri emebi.
- Gbaa mbọ hụ na clamp is securely fastened to a stable surface.
- Maka naanị ime ụlọ.
- The light source is built-in LED and can be replaced by qualified personnel if needed. Contact IKEA customer services for spare parts.
Melite
- Ịkwapu: Carefully remove all components from the packaging. Ensure all parts are present: lamp unit with clamp, power cord.
- Họrọ ebe: Select a suitable surface for clamping. Ihe clamping range is ⅓-1¾ inches (approximately 0.85 cm - 4.45 cm).
- Tinye Lamp: Mepee clamp and firmly attach it to the desired surface. Ensure the clamp is stable and the lamp dị nchebe.
- Njikọ Ike: Tinye eriri ọkụ n'ime oghere eletrik ọkọlọtọ.
Ntuziaka ọrụ
- Agbanye/ Gbanyụọ: Ndị lamp is equipped with a touch switch. Tap the switch to turn the lamp gbanye ma ọ bụ gbanyụọ.
- Ntuziaka ọkụ na-edozi: Ndị lamp arm and head are adjustable. Gently bend the flexible joint and pivot the lamp isi na-eduzi ìhè dị ka achọrọ.
Nlekọta
- Nhicha: Hichapụ lamp ya na mgbasa oziamp cloth. Use a mild detergent if necessary. Do not use abrasive cleaners or solvents.
- Ndochi isi iyi ọkụ: The LED light source is built-in. While designed for long life (approx. 25,000 hours), it can be replaced if needed. Contact IKEA customer services for assistance and spare parts. Do not attempt to replace the LED module yourself unless you are qualified.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Lamp adịghị agbanye. | Enweghị ọkụ. | Check if the power cord is securely plugged into the outlet. Test the outlet with another device. |
| Lamp flickers. | Loose connection or faulty power supply. | Ensure the power cord is fully inserted. Try a different outlet. If the problem persists, contact IKEA customer service. |
| Mwepụta ọkụ adịghị ada. | Normal wear of LED or dust accumulation. | Hichaa lamp head and optical lens. If the lamp is old, the LED may be nearing the end of its lifespan. |
Nkọwapụta
| Nọmba nlereanya | 204.498.95 |
| Ụdị | IKEA |
| Isi Iyi Ìhè | Wuru na-ikanam |
| Flux na-egbuke egbuke | 220 Lumen |
| Okpomọkụ agba | Ọcha na-ekpo ọkụ (2700 Kelvin) |
| Oriri ike | 1.9 W |
| Ndụ echere | Ihe ruru. awa 25,000 |
| Ogologo eriri | 6' 7" (2 meters) |
| Clampnke Range | ⅓-1¾" (0.85 cm - 4.45 cm) |
| Akụrụngwa | Clamp/Shade/Optical lens: Polycarbonate plastic; Flexi joint: Steel, Synthetic rubber |
| Ibu Ibu | 0.35 kilogram |
| Ngbanwe Ụdị | Metụ aka |
Akwụkwọ ikike na nkwado
For information regarding warranty, spare parts, or customer support, please contact IKEA customer services. You can find contact details at your local IKEA store or on the official IKEA websaịtị: IKEA.com.
The light bulb is pre-mounted but can be replaced when needed. Available as a spare part. For more information, contact IKEA customer services.