1. Okwu mmalite
Daalụ maka ịzụrụasing the ET2 Soji 2-Light LED Linear Pendant. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
2. Ozi nchekwa
- Nchekwa Eletriki: All electrical connections must be made in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Ịkwụsị ike: Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Fixture Handling: Handle the fixture with care. Avoid dropping or striking the glass shades.
- Voltage: This fixture is designed for 120 Volts. Ensure your power supply matches this requirement.
- Eji ime ụlọ naanị: This product is intended for indoor use only. Do not install in wet or damp ebe.
3. Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- ET2 Soji 2-Light LED Linear Pendant Fixture
- Akwụkwọ ntuziaka
- Ngwaike mgbakwasa
4. Ntọala na nwụnye
Professional installation is recommended. Ensure power is disconnected before proceeding.
- Kwadebe Mpaghara Nwụnye: Turn off power at the circuit breaker. Clear the area where the pendant will be installed.
- Debe oghere ahụ: The pendant includes a canopy with a diameter of 39.5 x 4.75 x 1.75 inches. Secure the mounting hardware to the junction box in the ceiling. This fixture is adaptable for sloped ceilings.
- Jikọọ Wiring: Follow the wiring diagrams provided in the included instruction manual. Connect the fixture's wires to the corresponding household wires (live, neutral, ground).
- Attach Fixture to Canopy: Carefully lift the fixture and attach it to the mounted canopy, ensuring all connections are secure.
- Wụnye ndo Glass: Gently attach the satin white glass shades to the fixture.
5. Ntuziaka ọrụ
Once installed and power is restored, the ET2 Soji LED Linear Pendant can be controlled via an app or a remote control, depending on your setup. Refer to the specific instructions provided with your smart control system for pairing and operation details.
- Gbanyụọ/ Gbanyụọ: Use the connected wall switch, remote control, or smart app to turn the light fixture on or off.
- Ndozi ihie: If connected to a compatible dimmer system, adjust brightness using the remote control or app.
6. Nlekọta
Mmezi mgbe niile na-eme ka ìhè pendant gị dị ogologo ma na-arụ ọrụ nke ọma.
- Nhicha: Disconnect power before cleaning. Use a soft, dry cloth to wipe the metal frame and glass shades. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Ọkụ: The integrated LED light source has a rated life of 30,000 hours and is not user-replaceable.
7. Nchọpụta nsogbu
If your pendant light is not functioning correctly, refer to the following common issues and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo | Enweghị ọkụ | Check circuit breaker or fuse. Ensure wall switch is on. |
| Ìhè flickers | Njikọ waya na-adịghị mma | Turn off power and check all wiring connections. Consult an electrician if unsure. |
| Remote control/App not working | Not paired or battery issue | Refer to your smart control system's manual for pairing instructions. Check remote control batteries. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | ET2 |
| Nọmba nlereanya | E25068-92BKGLD |
| Akụkụ ngwaahịa | 39.5"L x 6"W x 6"H |
| Agba | Black/Gold (Finish), Satin White (Shade) |
| Ihe onwunwe | Igwe, igwe |
| Ụdị isi iyi ọkụ | Ikanam |
| Ọnụọgụ nke isi mmalite ọkụ | 2 |
| Wattage | 17 watts (Total) |
| Voltage | 120 volts |
| Icha ọkụ | 1890 Lumen |
| Ịrụ ọrụ | 70 lumen kwa watt |
| Okpomọkụ agba agba | 3000 Kelvin |
| Enyere ndụ | awa 30,000 |
| Ụdị nwụnye | Ugwu Semi Flush |
| Usoro njikwa | App / Remote Control |
| Ojiji ime ime/n'èzí | Ime ụlọ |
| Ibu Ibu | 13.5 pound |
9. Akwụkwọ ikike na nkwado
The ET2 Soji 2-Light LED Linear Pendant comes with a Akwụkwọ ikike nrụpụta afọ 2 nwere oke. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị.
For warranty claims or technical support, please contact ET2 customer service. Keep your proof of purchase for warranty validation.
