SimpliFire Scion 43-Inch Clean Face Indoor Linear Electric Fireplace (Model SF-SC43-BK) User Manual

1. Ozi nchekwa

Read all instructions before installing or using this fireplace. Failure to follow these instructions may result in electric shock, fire, or property damage.

• This electric fireplace is UL approved for use in indoor or protected outdoor spaces, such as covered porches, patios, and three-season rooms.
• Ensure the electrical supply meets the specifications: 15 AMP, 120V/60 Hz, hardwired connection. Do not use a plug-in adapter.
• Debe ihe mgba ọkụ opekata mpe 3 (mita 0.9) site n'ihu ebe ekwú ọkụ.
• Do not block air vents. Ensure proper airflow for safe operation.
• Ngwaahịa a nwere kemịkalụ mara steeti California na-ebute ọrịa kansa na ntụpọ ọmụmụ ma ọ bụ mmerụ ahụ ọmụmụ ọzọ.

2. Ntọala na nwụnye

The SimpliFire Scion electric fireplace is designed for built-in installation, allowing finishing materials to be placed right up to the edge for a flush, integrated look.

2.1 Dimensions and Framing

Careful planning of the framing is essential for a proper built-in installation. Refer to the diagram and table below for precise measurements.

Nkọwa onyonyo: This image displays a technical diagram of the SimpliFire Scion electric fireplace, showing its front, side, and top views. Key dimensions (Width A, Height B, Depth C, Viewing Area D x E) are labeled, along with corresponding unit and framing measurements in inches and millimeters. The diagram also illustrates the electrical connection requirements and flame/ember color options.

2.2 Njikọ eletrik

This unit requires a hardwired electrical connection. It operates on 15 AMP, 120V/60 Hz. It is not designed for plug-in operation.

Nkọwa onyonyo: This image shows a person reviewing an installation guide for the fireplace, with a diagram illustrating the framing specifications (height, width, depth) required for a flush, built-in installation. A table below the diagram provides specific measurements for the SF-SC43-BK model.

3. Ntuziaka ọrụ

The SimpliFire Scion electric fireplace can be operated using the included multifunction remote control. Ensure 2x AAA batteries are installed in the remote.

Nkọwa onyonyo: This image features the SimpliFire remote control, highlighting its various functions: Power, Heater (Low/High Mode), Timer (30 min, 1-9 Hours), Flame (4 Flame Effects), Thermostat (Auto Set Temp), and Ember Light (13 Ember Colors). It also notes the remote's 16ft coverage and the requirement for 2x AAA batteries.

3.1 Ọrụ njikwa anya

• Ike: Turns the fireplace ON/OFF.
• Igwe ọkụ: Toggles between Low and High heat modes. The unit can be operated with or without heat.
• Ngụ oge: Sets an automatic shut-off timer from 30 minutes up to 9 hours.
• Ọkụ: Cycles through 4 distinct flame effects.
• Thermostat: Activates the auto-set temperature function.
• Ember Light: Na-agbanwe agba nke akwa akwa.

3.2 Flame and Ember Bed Settings

Customize the visual ambiance with various flame and ember bed color options:

• Agba ọkụ: Choose from Orange, Orange w/ Blue, Blue w/ Orange, and Blue.
• Agba akwa ember: Select from 13 LED lighting themes including Red, Orange, Gold, Green, Emerald, Aqua, Royal Blue, Ice Blue, Light Blue, Purple, Pink, Flamingo, White, and an option for no light.

Nkọwa onyonyo: This image illustrates the modern design of the SimpliFire electric fireplace, showcasing blue flames. It highlights the choice between included media options: driftwood logs or clear crystal media, allowing users to customize the aesthetic.

3.3 Mmepụta ọkụ

The integrated heater provides supplemental warmth with a heat output of 5000 British Thermal Units (BTUs), equivalent to 1500W on high and 750W on low. This is sufficient to heat an area of approximately 400 square feet.

4. Nlekọta

Mmezi mgbe niile na-eme ka ebe ọkụ eletrik gị rụọ ọrụ nke ọma ma dịgide ogologo oge.

• Nhicha: Ensure the unit is powered off and cool before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or sprays directly on the unit.
• Igwe ikuku: Periodically check that the air intake and exhaust vents are clear of dust and debris to maintain proper airflow.
• Igwe ọkụ: The LED lighting system is designed for long life and typically does not require replacement.

5. Nchọpụta nsogbu

If you encounter issues with your SimpliFire electric fireplace, refer to the following common solutions:

• Enweghị ike: Verify the electrical connection is secure and the circuit breaker has not tripped. Ensure the power button on the remote or unit is pressed.
• Enweghị Okpomọkụ: Check if the heater function is activated. Ensure the thermostat setting is above the ambient room temperature.
• Remote anaghị arụ ọrụ: Replace the AAA batteries in the remote control. Ensure there are no obstructions between the remote and the fireplace sensor.
• Mkpọtụ na-adịghị ahụkebe: Minor operational sounds are normal. If loud or persistent unusual noises occur, power off the unit and contact customer support.

6. Nkọwapụta

7. Akwụkwọ ikike Ozi

This SimpliFire electric fireplace is covered by a Akwụkwọ ikike onye nrụpụta afọ 2. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official warranty documentation provided with your product or contact SimpliFire customer support.

8. Nkwado na kọntaktị

For further assistance, detailed installation guides, or to view additional product information, please refer to the official resources:

• Akwụkwọ ntuziaka onye ọrụ (PDF): Budata PDF
• SimpliFire Brand Store: Visit SimpliFire Store
• Nkwado ndị ahịa: Refer to the contact information provided in the official user manual or on the SimpliFire websaịtị maka nkwado ozugbo.