1. Okwu mmalite
The HID Global RP10-H (Model: 900PHRNEK00466) is a versatile multi-technology access control reader designed for secure identification. This reader supports various credential technologies including PIVCLS, SE E, and operates with HF (High Frequency) standards, SIO, SEOS, and FIPS compliance. It is engineered for robust performance in access control systems, providing reliable authentication for authorized personnel. This manual provides essential information for the proper installation, operation, and maintenance of your RP10-H reader.
Nkọwa onyonyo: The image above displays the HID Global logo, which features the word "HID" in bold white capital letters against a solid blue rectangular background with rounded corners. A small registered trademark symbol (®) is visible in the upper right corner of the blue rectangle.
2. Ntọala na nwụnye
Proper installation is crucial for the optimal performance of the RP10-H reader. It is recommended that installation be performed by qualified personnel.
2.1. Ihe ngwugwu
- HID Global RP10-H Reader (Model: 900PHRNEK00466)
- Akụrụngwa mgbago (skru, arịlịka)
- Ntuziaka nwụnye (akwụkwọ a)
2.2. Ntuziaka Ntuziaka
- Choose a suitable mounting location, ensuring it is flat and free from obstructions.
- Use the provided mounting template (if applicable) to mark drilling points.
- Gwuo oghere ndị na-anya ụgbọ elu maka skru na-ebuli elu.
- Secure the reader to the mounting surface using the provided hardware. Ensure the reader is firmly attached.
2.3. Wiring na njikọ ike
The RP10-H reader requires a stable power supply and proper connection to the access control panel. Refer to the wiring diagram provided with your specific access control system for detailed connections.
- Connect the reader's power input to a regulated DC power supply (typically 5-16 VDC).
- Connect the data lines (e.g., Wiegand, OSDP) to the corresponding inputs on your access control panel.
- Gbaa mbọ hụ na njikọ niile echekwabara na mkpuchi mkpuchi iji gbochie obere sekit.
- Verify proper grounding to prevent electrical interference.
3. Operating the Reader
Once installed and powered, the RP10-H reader is ready for operation.
3.1. Credential Presentation
To gain access, present your compatible access credential (e.g., PIV, SEOS card, mobile credential) within close proximity to the reader's face. The optimal reading distance may vary depending on the credential type and environmental factors.
3.2. LED and Audible Indicators
The RP10-H reader provides visual and audible feedback to indicate its status and the outcome of a credential presentation.
| Ihe ngosi | Nkọwa |
|---|---|
| Green ikanam | Indicates successful credential read and access granted. |
| Uhie uhie | Indicates credential read error or access denied. |
| Amber/Yellow LED | Indicates reader busy or awaiting input. |
| Otu Beep | Successful credential read. |
| Multiple Beeps | Error during credential read or access denied. |
4. Nlekọta
The HID Global RP10-H reader is designed for minimal maintenance.
- Nhicha: Periodically wipe the reader's surface with a soft, damp akwa . Zere ihe nhicha ma ọ bụ ihe mgbaze nke nwere ike imebi njedebe.
- Mmelite femụwe: Firmware updates may be available from HID Global to enhance performance or add new features. Consult your system administrator or HID Global support for information on applying updates.
- Nyocha: Regularly inspect the reader and its wiring for any signs of damage or wear.
5. Nchọpụta nsogbu
If you encounter issues with your RP10-H reader, refer to the following common troubleshooting steps.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Reader is unresponsive (no LEDs, no sound). | Enweghị ike ma ọ bụ wiwi na-ezighi ezi. |
|
| Credential not reading or access denied (Red LED/multiple beeps). |
|
|
| Intermittent reading. |
|
|
For issues not resolved by these steps, please contact HID Global technical support or your system integrator.
6. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | 900PHRNEK00466 |
| Ụdị | HID Global |
| Teknụzụ akwadoro | PIVCLS, SE E, HF STD/SIO/SEOS/FIPS |
| Agba | Nwa (BLK) |
| Interface | Wiegand (WG) |
| Akụkụ ngwugwu | 8 x 8 x 8 sentimita asatọ |
| Ibu Ibu | 1 pound |
| ASIN | B07N5872JC |
| Ụbọchị mbụ dị | Septemba 4, 2019 |
7. Akwụkwọ ikike na nkwado
For information regarding the product warranty, please refer to the warranty documentation provided with your purchase or visit the official HID Global websaịtị.
For technical support, product inquiries, or further assistance, please contact HID Global customer service or your authorized distributor.
- HID Global Official Websaịtị: www.hidglobal.com
- Nkwado ndị teknuzu: Refer to the support section on the HID Global websaịtị maka nkọwa kọntaktị kpọmkwem na mpaghara gị.
