Amazon Basics DS-110SAM Small Slim Desk Drawer Security Safe User Manual

Okwu mmalite

This manual provides essential instructions for the setup, operation, and maintenance of your Amazon Basics Small Slim Desk Drawer Security Safe. Please read this manual thoroughly before using the safe to ensure proper function and security. Keep this manual for future reference.

Ozi nchekwa dị mkpa

• Etinyela igodo ndị na-anọchi anya ihe mberede n'ime ebe nchekwa ahụ. Debe ha n'ebe dị iche ma dị nchebe.
• Ensure the safe is mounted securely to prevent unauthorized removal.
• This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof. For fire or water protection, consider additional protective measures.
• Keep the keypad dry and clean. Avoid using abrasive cleaners.

Ihe ngwugwu

• Amazon Basics DS-110SAM Security Safe
• Emergency Override Keys (2)
• Akụrụngwa mgbago (skru, arịlịka)
• Akwụkwọ ntuziaka (akwụkwọ a)

Melite

1. Ntinye batrị

1. Open the safe using one of the emergency override keys. Insert the key into the keyhole located behind the keypad cover, turn it clockwise, and rotate the knob to open the door.
2. Chọta ebe batrị dị n'ime ọnụ ụzọ nchekwa ahụ.
3. Tinye batrị AA atọ ọhụrụ, hụ na polarity ziri ezi (+/-).
4. Mechie mkpuchi oghere batrị.

2. Setting Your Personal Code

Your safe comes with a factory default code (usually 1-5-9). It is highly recommended to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinges. You will hear a beep.
2. On the keypad, enter your new personal code (3 to 8 digits).
3. Pịa na jide the '#' button to confirm. You will hear a confirmation beep.
4. Test your new code with the door open before closing it. Enter your code, then press '#'. The green light should illuminate, allowing you to turn the knob and retract the bolts.

3. Ịwụnye Nchekwa ahụ

For enhanced security, the safe can be mounted to a drawer or other flat surface using the pre-drilled holes and included hardware.

Image: Back of the safe with pre-drilled mounting holes.

1. Choose a suitable location, such as inside a desk drawer, where the safe can be securely fastened.
2. Mark the positions for the mounting holes on the chosen surface using the safe's pre-drilled holes as a template.
3. Drill pilot holes into the surface.
4. Align the safe with the pilot holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached.

Image: The safe positioned within a desk drawer, demonstrating its intended use.

Operating the Safe

Foto: N'ihu view of the safe, highlighting the electronic keypad and locking mechanism.

1. Opening with Electronic Keypad

1. Enter your personal code (3 to 8 digits).
2. Press the '#' button. The green light will illuminate.
3. N'ime sekọnd ise, tụgharịa isi n'aka elekere ka imepee ụzọ nchekwa.

2. Opening with Emergency Override Key

Use this method if you forget your code or if the batteries are depleted.

Image: Close-up of the keypad with an emergency key in use.

1. Gently remove the keypad cover to reveal the keyhole.
2. Tinye otu n'ime igodo mberede nke na-agbanwe agbanwe n'ime oghere igodo ahụ.
3. Turn the key clockwise and simultaneously turn the knob to open the safe door.
4. Once open, you can replace the batteries if needed or reset your code.

3. Imechi na Ịkpọchi Nchekwa ahụ

1. Mechie ọnụ ụzọ nchekwa.
2. Turn the knob counter-clockwise to engage the locking bolts. The safe is now locked.

Image: Detail of the live-door bolts, which provide security when the safe is locked.

Nlekọta

1. Ngbanwe batrị

When the batteries are low, the red light on the keypad may flash or the safe may not respond. Replace all 4 AA batteries promptly to ensure continuous operation. Follow the battery installation steps in the Setup section.

2. Nhicha

Jiri ihe dị nro hichaa mpụta nke ebe nchekwa ahụamp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components.

Nchọpụta nsogbu

• Safe does not open with code:
  • Gbaa mbọ hụ na batrị dị ọhụrụ na arụnyere nke ọma.
  • Verify you are entering the correct code and pressing '#' firmly.
  • Try using the emergency override key.
• Ahụigodo anaghị anabata:
  • Dochie batrị.
  • Hụ na ihe ọ bụla na-egbochi bọtịnụ ahụ.
• Ọnụ ụzọ anaghị emechi nke ọma:
  • Check for any obstructions inside the safe or around the door frame.
  • Ensure the locking bolts are fully retracted before attempting to close.

Nkọwapụta

Ozi akwụkwọ ikike

For information regarding the warranty for your Amazon Basics product, please refer to the documentation included with your purchase or visit the official Amazon Basics websaịtị. Usoro na ọnọdụ akwụkwọ ikike nwere ike ịdị iche.

Nkwado ndị ahịa

If you have any questions, require assistance, or need to report an issue with your Amazon Basics safe, please contact Amazon customer support through their official websaịtị ma ọ bụ ozi kọntaktị enyere na ịzụrụ gị.