Okwu mmalite
The BONECO S200 Steam Humidifier provides hygienic and efficient humidification for your living space. This manual contains important information regarding the setup, operation, maintenance, and troubleshooting of your S200 humidifier to ensure optimal performance and longevity.
The S200 utilizes steam technology, boiling water to eliminate bacteria and minerals before releasing a pleasant, hand-warm mist into the air. It features a simple control knob for two output levels and a dedicated cleaning mode for easy maintenance.
Ntọlite na mbido mbụ
Iwepu ngwongwo
Carefully remove all components from the packaging. Ensure all parts are present:
- BONECO S200 Steam Humidifier Unit
- Mmiri mmiri
- Anti-Mineral Pads (2 included)
- Ntuziaka Mbido ngwa ngwa
Ndokwa
Place the humidifier on a firm, level, and water-resistant surface. Ensure it is not placed directly against a wall or furniture to allow for proper air circulation. Keep it away from heat sources and direct sunlight.
Na-ejuputa tank mmiri
- Wepu tank mmiri site na ngalaba ntọala.
- Unscrew the tank cap and fill the tank with clean tap water. Distilled water can be used to minimize mineral buildup, though not strictly required due to the boiling process and cleaning mode.
- Weghachite okpu tank ahụ na nzuzo.
- Place the filled water tank back onto the base unit.
Image: The BONECO S200 Steam Humidifier with its water tank visible on the left side.
Njikọ Ike
Plug the power cord into a suitable electrical outlet (120V AC). The unit is now ready for operation.
Ntuziaka ọrụ
Powering On and Adjusting Output
The BONECO S200 features a simple analog control knob for operation.
- Turn the control knob clockwise from the "O" (Off) position to select the desired output level.
- Level I (Low): Provides a quiet performance suitable for continuous operation and smaller rooms.
- Level II (High): Delivers maximum humidification output for faster results or larger rooms.
- The humidifier will begin to produce steam shortly after being turned on.
Image: Close-up of the control knob on the BONECO S200, showing the Off, Level I, Level II, and Cleaning Mode settings.
Mkpuchi akpaaka
The S200 is equipped with an automatic shut-off feature. When the water tank is empty, the unit will automatically turn off to prevent damage. A helpful reminder light will illuminate to indicate that the water tank needs refilling.
Using the Fragrance Tray
The S200 includes a fragrance tray for use with essential oils to enhance your room's atmosphere.
- Locate the small fragrance tray on the top of the unit, near the steam outlet.
- Add a few drops of your preferred essential oil directly into the tray. Do not add essential oils directly into the water tank.
- The aroma will be diffused with the steam into the room.
Image: A hand adding drops of essential oil into the dedicated fragrance tray on the top of the BONECO S200 humidifier.
Nlekọta na nhicha
Regular cleaning is crucial for maintaining the performance and hygiene of your BONECO S200 humidifier. The S200 features a convenient cleaning mode.
Nlekọta kwa ụbọchị
- Refill the water tank with fresh water daily.
- Wipe down the exterior of the unit with a soft, damp akwa .
Weekly Cleaning (Cleaning Mode)
The cleaning mode simplifies the removal of mineral deposits from the heating element.
- Gbaa mbọ hụ na etinyere unit ahụ ma dị jụụ.
- Wepu tank mmiri.
- Fill the base with water up to the indicated level.
- Add a de-calcifying agent (such as BONECO EZCal or EZCal PRO, or a descaling solution suitable for humidifiers) to the water in the base according to the agent's instructions.
- Place the water tank back on the unit.
- Turn the control knob to the "Cleaning Mode" setting (indicated by a brush icon).
- Allow the unit to run in cleaning mode for the recommended duration (refer to the de-calcifying agent's instructions or the humidifier's quick setup guide for specific times).
- Once the cleaning cycle is complete, unplug the unit.
- Carefully empty the water from the base and rinse thoroughly with clean water to remove any residue.
- Wipe the base and heating element clean with a soft cloth or brush.
Foto: Otu n'elu view of the interior base of the BONECO S200 humidifier, showing the heating element and water reservoir where cleaning takes place.
Anti-Mineral Pads
The S200 uses anti-mineral pads to help reduce mineral buildup. Replace these pads as needed, typically every 2-4 weeks depending on water hardness and usage. Refer to the quick setup guide for instructions on replacing the pads.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| No steam output / Unit not turning on. |
|
|
| Reduced steam output. |
|
|
| Unusual noise (e.g., excessive gurgling). |
|
|
| Odor from unit. |
|
|
If problems persist after attempting these solutions, please contact BONECO customer support.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Aha Nlereanya | Steam Humidifier S200 |
| Ụdị | Ọnụ ego nke BONECO |
| Akụkụ (L x W x H) | 12.44 x 6.77 x 11.03 sentimita asatọ |
| Ibu Ibu | 5.5 pound |
| Agba | Ọcha |
| Ụdị ọrụ | Manual (Control Knob) |
| Voltage | 120 volts (AC) |
| Wattage | 145 watt |
| Nha ime ụlọ akwadoro | Ruo 480 Square Feet |
| Ngwa gụnyere | Steam Humidifier, Anti-Mineral Pads (2), Quick Setup Guide |
| Ụdị nzacha | Wick (Anti-Mineral Pads) |
| UPC | 834546000954 |
Ozi akwụkwọ ikike
The BONECO S200 Steam Humidifier comes with a Akwụkwọ ikike dị afọ 3. Akwụkwọ ikike a na-ekpuchi ntụpọ dị na ngwa na arụ ọrụ n'okpuru ojiji nkịtị. Biko dowe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
For detailed warranty terms and conditions, please refer to the official BONECO websaịtị ma ọ bụ akwụkwọ agụnyere na ngwaahịa gị.
Nkwado ndị ahịa
For further assistance, technical support, or to purchase replacement parts and accessories, please contact BONECO customer service.
- Ngwa ntanetị: Visit the official BONECO websaịtị maka FAQ, ndebanye aha ngwaahịa, yana akwụkwọ nkwado ndị ọzọ.
- Akwụkwọ ntuziaka onye ọrụ (PDF): A comprehensive user manual in PDF format is available for download Ebe a.
