Mitel M695 Key Expansion Module User Manual

1. Okwu mmalite

The Mitel M695 Key Expansion Module is designed to extend the functionality of compatible Mitel IP phones. It provides additional programmable buttons and a color LCD display, enhancing call handling capabilities for users with high call volumes or those requiring quick access to various features.

This module is compatible with Mitel 6920, 6930, and 6940 IP phones.

Figure 1: Mitel M695 Key Expansion Module

Foto a na-egosi ihu view of the Mitel M695 Key Expansion Module, highlighting its programmable buttons and color display.

2. Ntọala na nwụnye

Follow these steps to properly install your Mitel M695 Key Expansion Module:

1. Unpack the Module: Carefully remove the M695 module from its packaging. Ensure all components are present.
2. Locate the Expansion Port: Identify the side expansion port on your compatible Mitel 6920, 6930, or 6940 IP phone. This port is typically located on the side of the phone.
3. Jikọọ modulu ahụ: Align the connector on the M695 module with the expansion port on the IP phone. Gently push the module into place until it is securely connected. Do not force the connection.
4. Secure the Module (if applicable): Some models may include a small screw or clip to further secure the expansion module to the phone. Refer to your IP phone's manual for specific securing instructions.
5. Power On/Restart Phone: If the phone was off, power it on. If it was already on, restart the phone to allow it to detect the newly connected expansion module.

The IP phone should automatically detect the M695 module upon restart. The module's display should illuminate, indicating a successful connection.

3. Operating the M695 Module

The Mitel M695 module provides 28 programmable buttons and a color LCD display to enhance your phone's functionality.

3.1 bọtịnụ mmemme

The 28 programmable buttons can be configured for various functions, including:

• Directory Numbers: Monitor the status of other extensions.
• Ọkpọ oku Ọsọ: Quickly dial frequently used numbers.
• Igodo njirimara: Access specific phone features (e.g., Call Forward, Do Not Disturb, Conference).

Bọtịnụ mmemme: The programming of these buttons is typically managed through your IP phone's user interface or by your system administrator. Consult your IP phone's user guide or your IT department for detailed instructions on how to assign functions to the programmable keys.

Ngosipụta LCD agba 3.2

The color LCD display on the M695 module provides visual feedback for the programmable buttons. It typically shows:

• Akara bọtịnụ: Text descriptions for each programmed key.
• Ndị Na-egosi Ọnọdụ: Visual cues (e.g., color changes, icons) to indicate line status, call presence, or feature activation.

The display automatically updates based on the programmed functions and real-time call activity.

4. Nlekọta

Proper care ensures the longevity and optimal performance of your Mitel M695 Key Expansion Module.

• Nhicha: Use a soft, dry, lint-free cloth to clean the exterior surfaces and display. For stubborn marks, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish and display.
• Ọnọdụ gburugburu: Keep the module in a dry environment, away from direct sunlight, excessive heat, and moisture. Ensure proper ventilation around the device.
• Ijikwa: Avoid dropping the module or subjecting it to strong impacts. Do not attempt to disassemble the unit, as this will void the warranty and may cause damage.

5. Nchọpụta nsogbu

If you encounter issues with your Mitel M695 Key Expansion Module, try the following troubleshooting steps:

• Module Not Detected:
  • Ensure the module is securely connected to the IP phone's expansion port.
  • Restart the IP phone.
  • Verify that your IP phone model is compatible with the M695 module.
• Ngosipụta anaghị arụ ọrụ:
  • Check the connection as described above.
  • Ensure the IP phone is powered on and functioning correctly.
  • If the issue persists, contact your system administrator or Mitel support.
• Bọtịnụ anaghị anabata:
  • Confirm that the buttons have been properly programmed by your system administrator.
  • Restart the IP phone.
  • Clean the button area with a dry cloth to ensure no debris is interfering.

For persistent issues or advanced troubleshooting, please contact your IT support or Mitel customer service.

6. Nkọwapụta

7. Akwụkwọ ikike na nkwado

For information regarding the product warranty, please refer to the documentation provided with your original Mitel IP phone or visit the official Mitel websaịtị. Usoro na ọnọdụ akwụkwọ ikike nwere ike ịdị iche site na mpaghara na ụbọchị ịzụrụ.

For technical support, assistance with programming, or service inquiries, please contact your authorized Mitel reseller or your organization's IT support department. You may also find support resources on the official Mitel support portal.