Okwu mmalite
Daalụ maka ịzụrụasing the SENTRY HPXBT150 Bluetooth Flat Cord Earbuds. This manual provides detailed instructions on how to set up, operate, and maintain your new wireless earbuds. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Ihe ngwugwu
- SENTRY HPXBT150 Bluetooth Flat Cord Earbuds
- Okwu nchekwa
- USB Charging Cable (Micro-USB)
- Removable Ear Hooks
- Akwụkwọ ntuziaka onye ọrụ
Ngwaahịa gafereview
The SENTRY HPXBT150 earbuds feature Bluetooth wireless technology, allowing for a cord-free listening experience. They include an in-line microphone for hands-free calls and media control buttons for easy operation. Removable ear hooks provide a secure fit, especially during physical activity.
Image: SENTRY HPXBT150 Bluetooth Earbuds showing the in-line control panel and ear hooks. The control panel features volume up/next track, power/multifunction, and volume down/previous track buttons.
Melite
1. Ịchaji ekwe ntị
- Locate the Micro-USB charging port on the in-line control unit.
- Connect the provided USB charging cable to the earbuds' charging port.
- Tinye eriri USB n'akụkụ nke ọzọ n'ime isi iyi ike USB dakọtara (dịka, ọdụ ụgbọ USB kọmputa, nkwụnye mgbidi USB).
- The LED indicator light will illuminate during charging. It will change color or turn off once charging is complete. A full charge typically takes approximately 1-2 hours.
2. Njikọ Bluetooth
- Hụ na ekweisi ndị ahụ chajịchara nke ọma tupu ha ejikọta ha na mbụ.
- Press and hold the multi-function button (usually the center button on the in-line control) for approximately 5-7 seconds until the LED indicator light flashes red and blue alternately. This indicates the earbuds are in pairing mode.
- On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings menu.
- Kwado Bluetooth wee chọọ ngwaọrụ dị.
- Select "HPXBT150" or a similar name from the list of found devices.
- Once successfully paired, the LED indicator on the earbuds will typically flash blue slowly or turn off, and you will hear an audible confirmation.
- Ọ bụrụ na a kpaliri maka paswọọdụ, tinye "0000".
Ntuziaka ọrụ
Gbanyụọ/ Gbanyụọ
- Ike Na: Press and hold the multi-function button for approximately 3 seconds until the LED indicator flashes blue and you hear a power-on tone.
- Gbanyụọ: Press and hold the multi-function button for approximately 3-5 seconds until the LED indicator flashes red and you hear a power-off tone.
Egwu Egwu
- Gwuo/kwụsịtụ: Pịa bọtịnụ ọtụtụ ọrụ otu ugboro.
- Olu elu: Pịa bọtịnụ '+'.
- Olu ala: Pịa bọtịnụ '-'.
- Track na-esote: Pịa ma jide bọtịnụ '+'.
- Gara aga Track: Pịa ma jide bọtịnụ '-'.
Njikwa Oku
- Azịza/Kwụsị Oku: Pịa bọtịnụ ọtụtụ ọrụ otu ugboro.
- Jụ oku: Pịa ma jide bọtịnụ ọtụtụ ọrụ maka ihe dị ka sekọnd abụọ.
- Nọmba Ikpeazụ emegharịgharịrị: Pịa bọtịnụ ọtụtụ ọrụ ugboro abụọ.
Nlekọta
- Nhicha: Use a soft, dry cloth to clean the earbuds. Do not use harsh chemicals or abrasive materials.
- Nchekwa: When not in use, store the earbuds in the provided protective case to prevent damage.
- Nlekọta batrị: To preserve battery life, avoid fully discharging the earbuds frequently. Charge them regularly, even if not used for extended periods.
- Zere mmiri mmiri: Keep the earbuds away from water and excessive moisture.
Nchọpụta nsogbu
| Nsogbu | Ngwọta enwere ike |
|---|---|
| Eti ntị anaghị agba ọkụ. | Ensure the earbuds are fully charged. Connect to a power source and allow time to charge. |
| Enweghị ike ijikọ na ngwaọrụ. | Ensure earbuds are in pairing mode (flashing red/blue). Turn off and on Bluetooth on your device. Move earbuds closer to your device. Forget previous pairings on your device and try again. |
| Enweghị ụda ma ọ bụ obere olu. | Check volume levels on both the earbuds and your connected device. Ensure earbuds are properly paired. Try re-pairing the earbuds. |
| Njikọ na-adịte aka. | Ensure there are no obstructions between the earbuds and your device. Move closer to your device. Avoid environments with strong Wi-Fi or other wireless interference. |
Nkọwapụta
- Ụdị: HPXBT150
- Teknụzụ Njikọta: Ikuku (Bluetooth)
- Ngalaba ọkwọ ụgbọ ala: 10mm
- Mgbochi: 32+/-3 Ohms
- Mmetụta: 103dB+/-3dB
- Nzaghachi ugboro ugboro: 20Hz - 20kHz
- Ngwa dakọtara: Phones, Tablets, MP3 Players, Computers, Gaming Consoles
- Ụdị njikwa: Njikwa Mgbasa ozi
- Atụmatụ pụrụ iche: Microphone Included, USB Connectivity, Removable Ear Hooks
- Ibu ihe: 2.08 ounces
Ozi nchekwa
- Do not expose the earbuds to extreme temperatures, direct sunlight, or fire.
- Do not disassemble or modify the earbuds. This may void the warranty and cause damage.
- Zere ige ntị n'ogo dị elu ruo ogologo oge iji gbochie mmebi ntị.
- Debe ebe ụmụaka na anụ ụlọ na-apụghị iru.
- Tụfuo ngwaahịa ahụ nke ọma dịka iwu mpaghara siri dị.
Akwụkwọ ikike na nkwado
For warranty information and technical support, please refer to the documentation included with your purchase or contact SENTRY customer service directly. Keep your proof of purchase for warranty claims.
