Amazon Basics Ni-MH AA/AAA Battery Charger with USB Output

Okwu mmalite

Daalụ maka ịzụrụasing the Amazon Basics Ni-MH AA/AAA Battery Charger with USB Output. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new charger. Please read this manual thoroughly before use and retain it for future reference.

Ozi nchekwa

• Use only with Ni-MH AA/AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, Ni-Cd, Li-ion) as this may cause explosion, rupture, or leakage, leading to personal injury or property damage.
• Do not charge 1 or 3 batteries. This charger is designed to charge batteries in pairs (2 or 4 batteries simultaneously).
• Ensure correct battery polarity (+/-) when inserting batteries. Insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
• Do not expose the charger to rain or moisture. Use indoors only.
• Emela ka chaja ahụ gbawaa, gbanwee, ma ọ bụ nwaa ịrụzi ya. Nye ndị ọrụ ruru eru ọrụ niile.
• Debe ebe ụmụaka na-apụghị iru.
• Kpupu chaja n'oku ọkụ mgbe anaghị eji ya ma ọ bụ tupu ihicha.
• Avoid charging batteries in extreme temperatures or direct sunlight.

Ngwaahịa gafereview

The Amazon Basics Ni-MH AA/AAA Battery Charger is designed for efficient and safe charging of your rechargeable batteries. It features multiple charging slots and a convenient USB output port.

Ngwa

• Battery Charging Slots (for AA/AAA Ni-MH batteries)
• USB Output Port (for charging USB-powered devices)
• Power Plug (EU standard)
• LED Indicators (for charging status)

Atụmatụ

• 4-hour Ni-MH battery charger with USB port.
• Charges 2 or 4 AA/AAA Ni-MH rechargeable batteries simultaneously.
• Reverse polarity and overcharge protection for safe charging.
• Built-in switching power technology for worldwide use (100-240V AC input).

Foto 1: N'ihu view of the Amazon Basics Ni-MH AA/AAA Battery Charger.

Ọgụgụ 2: Azụ view of the charger showing product label and EU plug.

Figure 3: Close-up of the USB output port located on the side of the charger.

Melite

1. Mepee chaja: Jiri nlezianya wepụ chaja na nkwakọ ngwaahịa ya.
2. Lelee maka mmebi: Check the charger for any visible damage. Do not use if damaged.
3. Kwadebe batrị: Ensure the Ni-MH AA/AAA batteries you intend to charge are clean and free from corrosion.

Ntuziaka ọrụ

Batrị Nchaji

1. Fanye batrị:
   • Insert 2 or 4 AA/AAA Ni-MH rechargeable batteries into the charging slots.
   • Ihe dị mkpa: When inserting batteries, always insert the negative (-) terminal first, then gently press down the positive (+) terminal to secure the battery and protect the contacts.
   • If charging only 2 batteries, place them side-by-side in two adjacent slots (e.g., the two leftmost slots or the two rightmost slots). The charger cannot charge 1 or 3 batteries.
2. Jikọọ na Ike: Plug the charger directly into a standard 100-240V AC wall outlet.
3. Nleba anya: The LED indicators will illuminate to show the charging status. Refer to the charger's specific LED behavior (e.g., red for charging, green for fully charged).
4. Wepu batrị: Once charging is complete (indicated by the LEDs), unplug the charger from the wall outlet and remove the batteries.

Figure 4: Charger with AA batteries correctly inserted for charging.

Figure 5: Charger with AAA batteries correctly inserted for charging.

Iji ọdụ ụgbọ mmiri USB

The charger features a USB output port that can be used to charge USB-powered devices (e.g., smartphones, tablets). This port provides 5.0V at 0.5A output.

1. Connect Charger to Power: Plug the battery charger into a standard 100-240V AC wall outlet.
2. Jikọọ Ngwaọrụ USB: Connect your USB-powered device to the USB output port on the charger using a compatible USB cable.
3. Ịchaji: Your device will begin charging. Note that charging batteries and using the USB output simultaneously might affect charging speeds.

Figure 6: Charger plugged into a wall outlet with a USB cable connected to the USB output port.

Nlekọta

• Nhicha: Unplug the charger before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Nchekwa: Debe chaja ahụ n'ebe dị jụụ ma kpọọ nkụ, ebe anwụ na-anaghị apụta kpọmkwem ma ọ bụ mmiri anaghị eru ya aka mgbe a naghị eji ya.
• Kọntaktị batrị: Periodically check the battery contacts in the charging slots for dust or debris and clean if necessary to ensure proper connection.

Nchọpụta nsogbu

Nkọwapụta

Figure 7: Dimensions of the Amazon Basics Battery Charger.

Akwụkwọ ikike na nkwado

For warranty information and customer support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Keep your purchase receipt for warranty claims.

Maka enyemaka ọzọ, gaa na: Ọrụ ndị ahịa Amazon