AMS F5962

Ntuziaka Onye Ọrụ Elekere Mgbidi AMS F5962 nke Redio Na-achịkwa

Ụdị: F5962

1. Okwu mmalite

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Ngwaahịa gafereview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Foto 1: N'ihu view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Ihe ngwugwu

Please check the package contents upon unpacking. Ensure all items are present and undamaged.

4. Nhazi

4.1 Ntinye batrị

  1. Chọta ebe batrị dị n'azụ elekere.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Mechie mkpuchi nke batrị batrị nke ọma.

Ihe dị mkpa: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Initial Time Synchronization

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Mara: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Ịwụnye Elekere ahụ

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Ntuziaka ọrụ

Once set up, the AMS F5962 operates automatically.

6. Nlekọta

6.1 Nhicha

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

6.2 nnọchi batrị

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery.

  1. Wepu batrị ochie na ngalaba.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Ederede gburugburu: Please dispose of used batteries responsibly according to local regulations.

7. Nchọpụta nsogbu

NsogbuIhe nwere ike imeNgwọta
Clock hands do not move or stop.Batrị agwụla.Dochie batrị ahụ na nke ọhụrụ.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Ntinye aka sitere na igwe eletrọnịkị ndị ọzọ.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Ensure the battery is fresh.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Nkọwapụta

ỤdịAMS
Nọmba nlereanyaF5962
Ụdị ngosiAnalọg
Njirimara Pụrụ IcheRadio-Controlled Time Synchronization
Ihe onwunweIgwe a na-ese
AgbaBeige (dial), Brown (housing)
ỤdịOchie
Akụkụ ngwaahịa35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Ibu Ibu1.22 n'arọ
Isi Iyi IkeAkwanyere batrị
Ojiji ime ime/n'èzíIme ụlọ

9. Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS websaịtị maka enyemaka ọzọ.

Akwụkwọ ndị emetụtara - F5962

Tupuview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Tupuview AMS Wall Clock Operating Instructions
Operating instructions for AMS wall clocks, covering battery installation, replacement, and general usage in multiple languages.
Tupuview Ntuziaka maka Ndabere AMS AS5600L Eval Kit
Akwụkwọ ntuziaka a na-enye ozi zuru oke maka bọọdụ ihe nkwụnye AMS AS5600L-WL_EK_AB, gụnyere ihe dị na kit, nkọwa bọọdụ, ntuziaka itinye ya, nkọwa pinout, ọrụ ụdị I2C, atụmatụ ngwaike, nhazi PCB, na ozi ịtụ ihe.
Tupuview Ntuziaka Onye Ọrụ Ihe Mmetụta Ọnọdụ Rotary nke ams AS5048 14-bit
This user manual provides detailed information on the ams AS5048, a 14-bit rotary position sensor with digital angle and PWM output. It covers the AS5048 adapter board, mounting, pinout, operation cases (SPI, Daisy Chain), firmware coding examples, and hardware schematics. Essential for engineers integrating this sensor into their systems.
Tupuview Ntuziaka Ngwa Nyocha nke AMS AS5048 Adapter Board
This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
Tupuview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.