Master MH-135T-KFA Kerosene Forced Air Heater User Manual

Okwu mmalite

Daalụ maka ịzụrụasing the Master MH-135T-KFA Kerosene Forced Air Heater. This manual provides important information for the safe operation, maintenance, and troubleshooting of your heater. Please read this manual thoroughly before operating the unit and keep it for future reference.

Figure 1: Master MH-135T-KFA Kerosene Forced Air Heater. This image shows the complete heater unit, featuring its yellow cylindrical body, black fuel tank base, and sturdy black handles and wheels for portability. The front of the heater emits a warm glow, indicating its heating function.

Ozi nchekwa dị mkpa

Na-agbaso usoro nchekwa nchekwa mgbe niile mgbe ị na-eji ngwa eletriki iji belata ihe egwu nke ọkụ, ujo eletrik na mmerụ ahụ mmadụ.

• Gụọ ntuziaka niile before using this heater.
• Gbaa mbọ hụ na ikuku ikuku dị mma iji gbochie nsị carbon monoxide.
• Do not use this heater in residential living areas. It is designed for industrial and outdoor use.
• Debe ihe ndị nwere ike ire ọkụ ma ọ dịkarịa ala ụkwụ asatọ (mita 2.4) site n'ihu ihe na-ekpo ọkụ na ụkwụ atọ (mita 0.9) site n'akụkụ na elu.
• Use only kerosene, JP8, Jet A fuel, 1 and 2 fuel oil, or 1 and 2 diesel as fuel. Do not use gasoline or other volatile fuels.
• Always unplug the heater when not in use or before servicing.
• Do not operate the heater if it has been dropped or damaged in any manner.
• This heater is equipped with an automatic safety shut-off system. Do not bypass or modify this feature.

Ngwaahịa gafereview

The Master MH-135T-KFA is a portable kerosene forced air heater designed for heating large spaces such as garages, workshops, construction sites, warehouses, and aircraft hangers. It features a robust design with integrated wheels and handles for easy transport.

Akụkụ ndị bụ isi:

• Mpụta BTU: 135,000 BTU
• Mpaghara kpo oku: Ruo 3375 square ụkwụ
• Ụdị mmanụ ụgbọala: Multi-fuel (Kerosene, JP8, Jet A fuel, 1 & 2 fuel oil, 1 & 2 diesel)
• Ike tank mmanụ: 10 galọn
• Oge ọrụ: Approximately 10 hours on a full tank
• Thermostat: Built-in for temperature control
• Nchekwa: Automatic safety shut-off system
• Enwere ike ibugharị: Integrated wheel and handle kits with heavy-duty pneumatic tires
• Nchọpụta nchọpụta: Digital temperature readout and LED diagnostics

Ọgụgụ 2: nso nso view of the heater's control panel and fuel tank. This image highlights the control knob, digital display, and various warning labels on the black fuel tank, indicating the heater's operational interface and safety information.

Ntọala na Mgbakọ

The Master MH-135T-KFA heater requires some assembly before first use. Follow these steps carefully:

1. Iwepu: Jiri nlezianya wepụ ihe niile dị na ngwugwu ahụ. Lelee ma ọ bụrụ na e nwere mmebi ọ bụla na mbupu.
2. Wheel and Handle Installation: Attach the heavy-duty pneumatic wheels and handles to the heater frame using the provided hardware. Ensure all bolts are securely tightened.
3. Nkwanye: Position the heater on a level, non-combustible surface. Ensure adequate clearance from walls, ceilings, and combustible materials as specified in the safety section.
4. Ịgba mmanụ: Fill the 10-gallon fuel tank with clean kerosene, JP8, Jet A fuel, 1 and 2 fuel oil, or 1 and 2 diesel. Do not overfill. Always refuel outdoors and away from ignition sources.
5. Njikọ ike: Connect the heater to a grounded electrical outlet using the integrated extension cord wrap. Ensure the power supply matches the heater's requirements.

Foto 3: Akụkụ view of the heater showing the robust handles and pneumatic wheels. This image emphasizes the heater's design for easy transport, highlighting the durable wheels and the handle extending from the main body.

Ntuziaka ọrụ

Ịmalite Igwe ọkụ:

1. Ensure the heater is properly fueled and connected to a power source.
2. Turn the Power On/Off switch to the "ON" position.
3. Set the thermostat to the desired temperature. The heater will automatically ignite and begin heating.
4. Monitor the digital temperature readout and LED diagnostics for operational status.

Na-emechi Igwe ọkụ:

1. Turn the Power On/Off switch to the "OFF" position.
2. Hapụ ihe na-ekpo ọkụ ka ọ jụọ oyi kpamkpam tupu ịkwaga ma ọ bụ chekwaa ya.
3. Unplug the heater from the power outlet.

Nleba mmanụ ụgbọala:

The built-in fuel gauge provides an indication of the remaining fuel level in the tank. Refuel when the gauge indicates low fuel to ensure continuous operation.

Nlekọta

Regular maintenance ensures the longevity and safe operation of your Master MH-135T-KFA heater. Always unplug the heater before performing any maintenance.

• Nhicha: Keep the heater clean and free from dust and debris. Use a soft, dry cloth for exterior cleaning.
• Ihe nzacha mmanụ ụgbọala: Periodically inspect and clean or replace the fuel filter to ensure proper fuel flow.
• Nozulu: Check the burner nozzle for clogs or damage. Clean or replace as necessary.
• Air Pressure Gauge: Ensure the built-in calibrated air pressure gauge is functioning correctly.
• Nchekwa: When storing the heater for extended periods, drain the fuel tank and store in a dry, safe location.

Nchọpụta nsogbu

Ọ bụrụ na nsogbu ahụ anọgide mgbe ị nwalechara ngwọta ndị a, kpọtụrụ ndị ọrụ ruru eru.

Nkọwapụta

Ozi akwụkwọ ikike

The Master MH-135T-KFA Kerosene Forced Air Heater comes with a Akwụkwọ ikike nke afọ 1 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repairs, or lack of proper maintenance.

For warranty claims or service, please contact Master customer support with your proof of purchase.