Ntuziaka Onye Ọrụ Elekere Mgbidi Pendulum nke AMS F5266/18 nke Oge A

Okwu mmalite

This manual provides detailed instructions for the setup, operation, and maintenance of your AMS F5266/18 Modern Radio Pendulum Wall Clock. Please read this guide thoroughly to ensure proper use and longevity of your clock.

Ngwaahịa gafereview

The AMS F5266/18 is a radio-controlled pendulum wall clock featuring a modern design with a beech wood back panel and a golden metallic face. Its radio function ensures accurate timekeeping by automatically synchronizing with a time signal.

Figure 1: AMS F5266/18 Modern Radio Pendulum Wall Clock. This image displays the clock's design, including its light beech wood back panel, golden metallic face with black Arabic numerals, and a matching golden pendulum.

Akụkụ ndị bụ isi:

Radio-controlled time synchronization for precision.
Elegant design with a veneered beech wood back panel.
Aluminum numeric ring and front tire.
Functional pendulum movement.
Manufactured in Germany, ensuring quality craftsmanship.

Ntuziaka nhazi

Iwepu: Carefully remove the clock from its packaging. Inspect for any damage.
Nwụnye batrị: Locate the battery compartment on the back of the clock. Insert one (1) AA battery, ensuring correct polarity (+/-).
Ntinye Pendulum: Gently attach the pendulum to its designated hook or slot, typically located below the clock mechanism. Ensure it hangs freely.
Ịkwanye: Choose a suitable wall location. The clock should be hung securely using appropriate wall anchors and screws (not included). Ensure the clock is level for optimal pendulum operation.
Initial Time Synchronization: After battery installation, the clock will automatically search for the radio time signal. This process may take several minutes. Place the clock near a window or in an area with good signal reception for faster synchronization. The hands will move to 12:00 and then adjust to the correct time once the signal is received.

Ntuziaka ọrụ

Your AMS F5266/18 clock is designed for automatic operation once set up correctly.

Ntọala oge akpaaka: The clock continuously monitors the radio time signal to maintain accurate time. It will automatically adjust for Daylight Saving Time (DST) changes.
Pendulum Movement: Once the clock is running, gently start the pendulum swinging. It will continue to swing as part of the clock's aesthetic and mechanical design.

Nlekọta

Ngbanwe batrị: Replace the AA battery annually or when the clock hands stop moving or the time becomes inaccurate. Use a fresh, high-quality alkaline battery.
Nhicha: Dust the clock regularly with a soft, dry cloth. For the metallic and wooden surfaces, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or solvents.
gburugburu: Keep the clock away from direct sunlight, extreme temperatures, and high humidity to prevent damage to the wood and internal components.

Nchọpụta nsogbu

Nsogbu	Ihe nwere ike ime	Ngwọta
Clock does not start or stops.	Batrị nwụrụ anwụ ma ọ bụ arụnyere na ezighi ezi.	Check battery polarity. Replace with a fresh AA battery.
Clock does not set correct time.	Poor radio signal reception.	Move the clock to a location with better signal reception, ideally near a window. Allow several minutes for synchronization.
Pendulum does not swing.	Pendulum not properly installed or obstructed.	Ensure the pendulum is correctly hooked and swings freely without touching the clock casing. Gently initiate the swing.
Clock makes a subtle ticking sound.	Normal mechanical operation.	This is a characteristic of the clock's movement and is not a defect.

Nkọwapụta

Ụdị: F5266/18
Akara: AMS
Akụkụ (W x H x D): 22 cm x 62 cm x 8 cm
Arọ: 1.2 kilogram
Ihe: Beech Wood (veneered back panel), Aluminum (numeric ring, front tire)
Isi mmalite ike: Batrị 1 x AA (anaghị etinye ya)
Ụdị ngosi: Analọg
Njirimara Pụrụ Iche: Oge ejikwa redio
Mmalite: Emere na Germany

Akwụkwọ ikike na nkwado

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. You may also visit the official AMS websaịtị maka enyemaka ọzọ.

	AMS 5898 / 5893 Radio-Controlled Clock User Manual Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
	AMS Wall Clock Operating Instructions Operating instructions for AMS wall clocks, covering battery installation, replacement, and general usage in multiple languages.
	Ntuziaka maka Ndabere AMS AS5600L Eval Kit Akwụkwọ ntuziaka a na-enye ozi zuru oke maka bọọdụ ihe nkwụnye AMS AS5600L-WL_EK_AB, gụnyere ihe dị na kit, nkọwa bọọdụ, ntuziaka itinye ya, nkọwa pinout, ọrụ ụdị I2C, atụmatụ ngwaike, nhazi PCB, na ozi ịtụ ihe.
	Ntuziaka Onye Ọrụ Ihe Mmetụta Ọnọdụ Rotary nke ams AS5048 14-bit This user manual provides detailed information on the ams AS5048, a 14-bit rotary position sensor with digital angle and PWM output. It covers the AS5048 adapter board, mounting, pinout, operation cases (SPI, Daisy Chain), firmware coding examples, and hardware schematics. Essential for engineers integrating this sensor into their systems.
	Ntuziaka Ngwa Nyocha nke AMS AS5048 Adapter Board This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
	AMS Clock Operating Instructions and Battery Replacement Guide Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.

AMS F5266/18