Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, maintenance, and rekeying of your Weiser Lock GDC9471 Elements Single Cylinder Deadbolt. This deadbolt is designed for security and convenience, featuring SmartKey technology for easy rekeying and enhanced resistance against picking and bumping.
Image: Weiser Lock GDC9471 Elements Single Cylinder Deadbolt, showing the exterior key cylinder and interior thumb turn components.
Njirimara ngwaahịa
- Single Cylinder Design: Key access from the exterior, thumb turn operation from the interior.
- Full 1-inch Throw: Provides enhanced security with a robust deadbolt extension.
- Nchekwa SmartKey: Features a Kwikset chassis with SmartKey cylinder technology, eliminating traditional pins and springs.
- Rekeying Capability: Allows for instant rekeying in three simple steps using the included learning tool.
- Nchekwa emelitere: Designed to be bump-resistant and highly pick-resistant.
- Adjustable Backset: Standard adjustable backset for versatile installation.
Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- Exterior Deadbolt Cylinder Assembly
- Interior Thumb Turn Assembly
- Deadbolt Latch Mechanism
- Efere efere
- Ịkwanye kposara
- Igodo ọkọlọtọ
- SmartKey Rekeying Learning Tool
Ihe nwụnye chọrọ
Hụ na ọnụ ụzọ gị ruru ihe ndị a maka nrụnye kwesịrị ekwesị:
- Ọkpụrụkpụ ọnụ ụzọ: Fits all standard doors 1-3/4 inches thick.
- Crossbore Hole: Requires a 2-1/8 inch diameter crossbore hole.
- Edge Bore: Requires a 1 inch diameter edge bore.
- Mbido: Compatible with 2-3/8 inch to 2-3/4 inch adjustable backsets.
For detailed installation steps, refer to the diagram included with your product packaging. Professional installation is recommended if you are unfamiliar with door hardware installation.
Ntuziaka ọrụ
Locking the Deadbolt:
- Site na Mputa: Insert the key into the exterior cylinder and turn it 90 degrees clockwise to extend the deadbolt into the strike plate. Remove the key.
- Site na ime obodo: Rotate the thumb turn on the interior assembly to extend the deadbolt into the strike plate.
Unlocking the Deadbolt:
- Site na Mputa: Insert the key into the exterior cylinder and turn it 90 degrees counter-clockwise to retract the deadbolt. Remove the key.
- Site na ime obodo: Rotate the thumb turn on the interior assembly to retract the deadbolt.
Ntuziaka mgbagharị SmartKey
The SmartKey feature allows you to rekey your deadbolt to a new key in three simple steps. This is useful for security updates or if you wish to use a single key for multiple SmartKey locks.
- Insert Current Key: Insert your currently working key fully into the cylinder and turn it 90 degrees clockwise to the horizontal position.
- Insert Learning Tool: While the current key is still turned 90 degrees, insert the SmartKey learning tool fully into the small hole on the face of the cylinder. Remove the learning tool.
- Insert New Key: Remove the current key. Insert your new key fully into the cylinder and turn it 180 degrees counter-clockwise back to the vertical position. Your lock is now rekeyed to the new key. Test the new key to ensure proper operation.
Ihe dị mkpa: Always test the new key with the door open first to avoid accidental lockout.
Nlekọta
Regular maintenance ensures the longevity and smooth operation of your deadbolt.
- Nhicha: Jiri nwayọ hichaa elu mpụta, damp ákwà. Zere ihe nhicha ma ọ bụ ihe mgbaze nke nwere ike imebi ihe ahụ.
- mmanu mmanu: If the deadbolt mechanism feels stiff, apply a small amount of graphite-based lubricant (not oil-based) into the keyway and the latch mechanism. Do not over-lubricate.
- Mkpọchi nke ịghasa: Periodically check and tighten all mounting screws to ensure the deadbolt remains securely fastened to the door. Do not overtighten.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igodo anaghị atụgharị ma ọ bụ sie ike. | Incorrect key, debris in keyway, or lack of lubrication. | Ensure you are using the correct key. Clean keyway with compressed air. Apply graphite lubricant. |
| Deadbolt anaghị agbatị ma ọ bụ laghachi azụ kpamkpam. | Misalignment with strike plate, loose screws, or obstruction. | Check strike plate alignment and adjust if necessary. Tighten mounting screws. Ensure no debris obstructs the bolt path. |
| Thumb turn is loose or not engaging. | Loose interior assembly screws. | Remove interior cover and tighten the screws that secure the thumb turn assembly. |
Nkọwapụta
| Ụdị | Weiser |
| Nọmba nlereanya | GDC9471 11P K3 SMT MS RL |
| Ụdị Silinder | Silinda otu |
| Ụzọ igodo | SmartKey |
| Nha azụ azụ | Adjustable 2-3/8" to 2-3/4" |
| Exterior Access | Igodo |
| Interior Action | Tụgharịa isi mkpịsị aka |
| Standard Door Thickness | 1-3/4" |
| Required Crossbore Hole | 2-1/8" diameter |
| Required Edge Bore | 1" dayameta |
| Ihe onwunwe | Ọla |
| Mechaa | Venetian Ọla |
| Ibu Ibu | 12 pound |
| UPC | 059184203271 |
Akwụkwọ ikike na nkwado
Specific warranty details are not provided in this document. For warranty information, technical support, or to purchase replacement parts, please contact Weiser customer service directly. You can typically find contact information on the manufacturer's websaịtị ma ọ bụ na nkwakọ ngwaahịa.
Onye nrụpụta: Weiser Lock