Ntuziaka Onye Ọrụ Teka DS 60.1/70/90 Cooker Hood

Okwu mmalite

Thank you for choosing a Teka cooker hood. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your DS 60.1/70/90 series cooker hood. Please read these instructions carefully before using the appliance and retain them for future reference.

Ntuziaka nchekwa

Iji hụ na ọrụ gị dị mma, gbasoo ihe ndị a dị mkpa mgbe niile:

• Ensure the electrical installation complies with local regulations.
• Ekwela ka ụmụaka rụọ ngwa ahụ.
• Regularly clean the metal grease filters to prevent fire hazards.
• Adịla flambé n'okpuru mkpuchi osi ite.
• Ensure adequate ventilation in the room when the hood is used simultaneously with gas or other fuel-burning appliances.
• Kwụpụ ngwa na ọkụ ọkụ tupu ihicha ma ọ bụ mmezi ọ bụla.

Ngwaahịa gafereview

The Teka DS 60.1/70/90 series cooker hood is a wall-mounted appliance designed for efficient extraction of cooking fumes. It features electronic controls, halogen lighting, and a robust stainless steel construction.

Foto nke 1: N'ihu view of the Teka DS 60.1/70/90 series cooker hood. This image displays the stainless steel finish, the control panel with buttons, the halogen lamps, and the metal grease filters visible on the underside.

Akụkụ ndị bụ isi:

• Electronic backlit controls
• Halogen lamps (2 x 20W)
• Three standard speeds plus an intensive speed setting
• Light indicator for selected speed
• Aspiration time programmer
• Metallic grease filters
• Easy-to-clean interior panel
• Double turbine shielded motor
• Can operate in ducted or recirculation mode

Nwụnye (Nhazi)

Installation should be performed by a qualified technician in accordance with all local and national regulations.

1. Ịkwanye: The hood is designed for wall mounting. Ensure the wall structure is strong enough to support the appliance's weight.
2. Ducting (Ducted Mode): Connect the hood's outlet to an external ducting system. Ensure the ducting is of appropriate diameter and material to maintain optimal airflow. Avoid sharp bends.
3. Recirculation (Recirculation Mode): If operating in recirculation mode, install the optional charcoal filters (SET 2/A 1/C 1/C, sold separately) and ensure the air outlet is directed back into the kitchen through the provided vents.
4. Njikọ eletrik: Connect the appliance to a suitable power supply. Verify the voltage na ugboro ugboro dakọtara na nkọwapụta na ọkwa ọkwa.
5. Ogologo kacha nta: Maintain the minimum safe distance between the cooking surface and the lower part of the hood as specified in local regulations and the installation template.

Ọrụ

The cooker hood is operated via electronic backlit controls located on the front panel.

• Gbanyụọ/ Gbanyụọ: Press the power button to turn the hood on or off.
• Nhọrọ ọsọ ọsọ: Use the speed buttons (1, 2, 3) to select the desired extraction level. An indicator light will show the currently selected speed.
• Ọsọ dị egwu: Press the intensive speed button for maximum extraction power. This mode typically operates for a set period (e.g., 5-10 minutes) before automatically reverting to the previous speed setting.
• Njikwa ọkụ: Press the light button to turn the halogen lamps ma ọ bụ gbanyụọ.
• Aspiration Time Programmer: This function allows you to set a specific duration for the hood to operate before automatically switching off. Refer to the detailed instructions in the full manual for programming steps.

For optimal performance, switch on the hood a few minutes before cooking and leave it running for approximately 10-15 minutes after cooking to clear residual fumes.

Nlekọta

Regular maintenance ensures the longevity and efficiency of your cooker hood.

Cleaning the Metal Grease Filters:

1. Ugboro: Clean the metal grease filters approximately every 2-4 weeks, depending on usage.
2. Mwepụ: Disconnect the power supply. Carefully unlatch and remove the metal filters from the hood.
3. Nhicha: Wash the filters by hand in hot soapy water or in a dishwasher (ensure they are placed to avoid damage). Do not use abrasive detergents.
4. Nwụnye: Ensure filters are completely dry before reinserting them into the hood.

Replacing Charcoal Filters (Recirculation Mode Only):

• Ugboro: Charcoal filters cannot be washed and must be replaced every 3-6 months, depending on usage.
• Usoro: Disconnect power. Remove the metal grease filters. Follow the specific instructions for your model to detach and replace the charcoal filters.

Na-ehicha Mpụga:

Wipe the stainless steel exterior with a soft cloth and a non-abrasive stainless steel cleaner. Avoid harsh chemicals or abrasive pads.

Replacing Halogen Lamps:

• Usoro: Disconnect power. Allow lamps to cool. Carefully remove the lamp cover (if applicable) and replace the faulty halogen lamp na nke ọhụrụ nke otu ụdị na wattage (20W).

Nchọpụta nsogbu

If the problem persists after attempting these solutions, please contact Teka customer support or a qualified service technician.

Nkọwapụta

Akwụkwọ ikike na nkwado

Teka products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Teka websaịtị.

For technical support, spare parts, or service requests, please contact your local Teka service center. You can find contact information on the Teka websaịtị ma ọ bụ n'ime akwụkwọ ngwaahịa gị.

Akụrụngwa dị n'ịntanetị: www.teka.com