1. Ngwaahịa gafereview
The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.
Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.
Akụkụ ndị bụ isi:
- Ọrụ dị mfe: Engage and release the door holder with a foot.
- Ihe owuwu na-adịgide adịgide: Made from cast aluminum for longevity.
- Njide echekwara Features a rubber bottom to prevent slipping.
- Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
- Mechaa: Bright Brass.
2. Ihe ngwugwu
Nyochaa na akụrụngwa niile dị tupu ịmalite nrụnye.
- Schlage SP455A3 Kick Down Door Holder (1 unit)
- Ngwa mgbakwunye (skru)
3. Ntuziaka nwụnye
This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.
Ngwa achọrọ:
- Pensụl
- Ihe teepu
- Drill with appropriate drill bit (for pilot holes)
- Skrewdriver (a na-atụ aro isi Phillips)
Nzọụkwụ nwụnye:
- Kpebie ebe mgbago: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
- Lelee mkpochapụ: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
- Mark Screw Holes: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
- Oghere pilot: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
- Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
- Ọrụ nnwale: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.
4. Ntuziaka ọrụ
The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.
- Iji tinye aka: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
- Ka ha wepụta: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.
5. Nlekọta
Regular maintenance ensures optimal performance and extends the life of your door holder.
- Nhicha: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
- Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
- Mechie skru: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.
6. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Door holder does not hold the door securely. |
|
|
| Door holder feels loose on the door. | Ihe nkedo skru adịghị atọ ụtọ. | Tighten mounting screws with a screwdriver. |
7. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ụdị | CHLỌ |
| Nọmba nlereanya | 455A3 |
| Ụdị nkwụnye | Ugwu ụzọ |
| Ihe onwunwe | Aluminum, Brass, Rubber |
| Agba/Mechaa | Brass na-egbuke egbuke |
| Arm Length / Size | 4 inches (4 in H) |
| Door-to-Floor Clearance | 2 sentimita asatọ ma ọ bụ obere |
| Ibu Ibu | 2.4 ounces |
| Akụkụ ngwaahịa | 9.43 x 4.26 x 5.95 sentimita asatọ |
| Ngwa gụnyere | Door holder, Mounting Hardware |
| Batrị achọrọ | Mba |
8. Akwụkwọ ikike na nkwado
For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.
If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's webngwugwu saịtị ma ọ bụ ngwaahịa.
