ArduCam B0176 5MP Igwefoto Module maka akwụkwọ ntuziaka Raspberry Pi

Igwefoto 5MP maka Raspberry Pi

Igwefoto 5MP maka Raspberry Pi

Igwe anya moto nwere ike ijikwa mmemme yana nlebara anya na-agbanwe agbanwe
SKU: B0176
Ntuziaka Manual

ọdịnaya zoo

8 Akwụkwọ / akụrụngwa

8.1 Ntụaka

9 Ozi ndị metụtara

Nkọwapụta

Ụdị	Arducam
Ihe Nnyocha igwefoto
Sensọ	OV5647
Mkpebi	5MP
Foto ka dị	2592×1944 Max
Vidiyo	1080P Max
Ọnụego Frame	30fps @ 1080P, 60fps@720P
oghere
Mmetụta IR	Integral IR filter, naanị ìhè a na-ahụ anya
Ụdị elekwasị anya	Nlekwasa moto
Ubi nke View	54°×44°(Horizontal × vetikal)
bọọdụ igwefoto
Nha bọọdụ	25 × 24mm
Njikọ	15pin MIPI CSI

Ndị otu Arducam

Arducam anọwo na-emepụta ma na-emepụta modul igwefoto maka Raspberry Pi kemgbe 2013. Na-enwere onwe gị ịkpọtụrụ anyị ma ọ bụrụ na ịchọrọ enyemaka anyị.
Email: nkwado@arducam.com
Websaịtị: www.arducam.com
Skype: Arcam
Akwụkwọ: arducam.com/docs/camera-for-raspberry-pi

Jikọọ igwefoto

Ịkwesịrị ijikọ modul igwefoto na ọdụ ụgbọ mmiri Raspberry Pi, wee bido Pi wee hụ na agbanyere ngwanrọ ahụ.

Chọta ọdụ ụgbọ mmiri igwefoto (n'etiti HDMI na ọdụ ụgbọ mmiri) ma jiri nwayọọ dọpụta ya na nsọtụ rọba.
Tinye rịbọn igwefoto, wee hụ na njikọ ọlaọcha na-eche ihu n'ọdụ ụgbọ mmiri HDMI. Ehulatala eriri flex ahụ, wee hụ na etinyere ya nke ọma.

Kwadaa njikọ rọba ala ka ị na-ejide eriri flex ruo mgbe njikọ ahụ laghachiri n'ọnọdụ.
Kwado igwefoto n'ụzọ ọ bụla n'okpuru:

a. Mepee ngwa raspi-config site na Terminal. Gbaa sudo raspi-config, họrọ Kwado igwefoto wee kụọ tinye, wee gaa mechaa, a ga-akpali gị ịmalitegharị.
b. Isi NchNhr > Mmasị > Nhazi Pi Raspberry > Interface > Na igwefoto họrọ Kwanyere > OK

Jiri igwefoto

Ntuziaka maka ikpokọta akpa igwefoto acrylic: https://www.arducam.com/docs/cameras-forraspberry-pi/camera-case/

Ederede Python maka njikwa nlebara anya (a kụzikwara ya na ngalaba “Software” nke ibe na-esote): https://github.com/ArduCAM/RaspberryPi/tree/master/Motorized_Focus_Camera

Ọbá akwụkwọ izugbe maka igwefoto raspberry pi:
Shell (ahịrị iwu Linux): https://www.raspberrypi.org/documentation/accessories/camera.html#raspicam-commands
Python: https://projects.raspberrypi.org/en/projects/getting-started-with-camera

Nchọpụta nsogbu

Ọ bụrụ na modul igwefoto anaghị arụ ọrụ nke ọma, biko nwaa ihe ndị a:

Gbaa apt-nweta mmelite na sudo apt-nweta nkwalite tupu ịmalite nchọpụta nsogbu.

Gbaa mbọ hụ na ị nwere ọkụ ọkụ zuru oke. Igwefoto modul a na-agbakwunye ike 200-250mA na Raspberry Pi gị. Ọ ga-akara gị mma iji ihe nkwụnye ego nwere nnukwu mmefu ego ike.
Gbaa vcgencmd get_camera wee lelee mmepụta. Ekwesịrị ịkwado mmepụta = 1 chọpụtara = 1. Ọ bụrụ nkwado=0, agbanyere igwefoto. Biko mee ka igwefoto gbanye ka e nyere gị ntụziaka na "Jikọọ
isiakwụkwọ ahụ. Ọ bụrụ na achọpụtara = 0, ejikọtaghị igwefoto nke ọma, wee lelee isi ihe ndị a, malitegharịa, ma malitegharịa iwu ahụ.

Ekwesịrị idobe eriri rịbọn ahụ nke ọma na njikọ ma chere ihu n'ụzọ ziri ezi. Ọ kwesịrị ịdị ogologo na njikọ ya.
Jide n'aka na njikọ modul sensọ nke na-ejikọta ihe mmetụta na osisi ahụ na-ejikọta ya nke ọma. Njikọ a nwere ike ibia ma ọ bụ hapụ ya na bọọdụ mgbe ị na-ebufe ma ọ bụ mgbe itinye igwefoto n'ime akpa. Jiri ntu mkpịsị aka gị tụgharịa elu wee jikọọ njikọ ahụ site na iji nwayọọ nwayọọ, ọ ga-eji ntakịrị ọpịpị mee ihe.
Malitegharịa ekwentị mgbe ọ bụla mgbe mgbalị ọ bụla imezi ya. Biko kpọtụrụ Arducam (email na "The Arducam Team" isi) ma ọ bụrụ na ịnwalela usoro ndị a dị n'elu ma enweghị ike ime ya ka ọ rụọ ọrụ.

Ngwa ngwa

Wụnye ọba akwụkwọ nchekwa Python Sudo apt-nweta wụnye python-opencv
Achọrọ ịmalitegharị mgbe ịmechara edemede a. git clone: https://github.com/ArduCAM/Raspberry Pi. Igwefoto lekwasịrị anya Raspberry Pi/Motorized nwere onyinye
Kwado I2C0: ọdụ ụgbọ mmiri chmod +x enable_i2c_vc.sh ./enable_i2c_vc.sh

Gbaa examples

cd RaspberryPi/Motorized_Focus_Camera/python sudo Python Motorized_Focus_Camera_Preview.py

Ntinye akwụkwọ ntuziaka na tupuview ọnọdụ. Jiri igodo elu na ala ahụigodo ka ịhụ usoro nlebara anya. sudo Python Autofocus.py
Akụrụngwa akpado anya ngwa ngwa sitere na OpenCV. A na-echekwa onyonyo na mpaghara file usoro mgbe ọ bụla na-aga nke ọma autofocus.

FAQ

Ajụjụ: Ị na-enye igwefoto 8MP V2 Auto Focus Camera?

A: Ee, anyị na-enye nchikota oghere-sensor IMX219 8MP dochie dobe na nkwado autofocus, mana ịchọrọ Raspberry Pi Camera Module V2 nke gị, ị ga-ewepụkwa nke mbụ.
modul sensọ.

Ajụjụ: Ị na-enye igwefoto Pi na njikwa elekwasị anya ọbụna karịa 8MP?

A: Ee, Arducam na-enye 13MP IMX135 na 16MP IMX298 MIPI modul igwefoto nwere oghere moto nwere mmemme iji na Raspberry Pi. Agbanyeghị, ndị ahụ bụ maka ndị ọrụ dị elu nwere ndabere mmepe. Ha adabaghị na ndị ọkwọ ụgbọ ala Raspberry Pi, iwu na ngwanrọ. Ịkwesịrị iji Arducam SDK na examples. Gaa na arducam.com ka ịmatakwu gbasara Arducam MIPI Camera Project.

Ajụjụ: Kedu ka m ga-esi nweta arụmọrụ obere ọkụ ka mma?
Igwefoto a nwere nzacha IR arụnyere na ọ naghị arụ ọrụ nke ọma na ọnọdụ ọkụ dị obere. Ọ bụrụ na ọrụ gị na-arụ ọrụ na obere ọkụ, biko dozie isi iyi ọkụ mpụga ma ọ bụ kpọtụrụ anyị maka ụdị NoIR.