AMAZON CON4 Sauna Stove Controller Instruction Manual

1. Okwu mmalite

This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.

2. Ozi nchekwa

ỊDỌ AKA NA NTỊ: Ọ bụ naanị onye ọrụ ọkụ eletrik ruru eru ka e kwesịrị ịrụnye nrụnye ọkụ eletrik dịka iwu niile nke mpaghara na mba si dị.

• Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
• Do not operate the controller with wet hands or in wet conditions.
• Gbaa mbọ hụ na njikọ niile echekwara na mkpuchi nke ọma.
• Keep the control panel and control box away from water and high humidity.
• This device is intended for controlling sauna stoves. Do not use it for other purposes.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• AMAZON CON4 Control Panel
• Control Box (Power Unit)
• Temperature Probe Cable

4. Nkọwapụta

5. Nwụnye na Ntọala

Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.

5.1 njirimara akụrụngwa

Familiarize yourself with the main components:

• Ogwe njikwa: The user interface for setting time and temperature.
• Igbe njikwa: The main power unit that connects to the sauna heater and power supply.
• Nyocha okpomọkụ: Measures the room temperature in the sauna.

5.2 Njikọ njikọ

The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.

1. Ịkwanye: Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
2. Ịnye ọkụ: Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
3. Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
4. Njikọ Ogwe njikwa: Connect the control panel to the control box using the provided cable.
5. Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.

CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.

6. Ntuziaka ọrụ

The CON4 control panel features an intuitive interface for managing your sauna experience.

6.1 Ogwe njikwa gafereview

Ogwe njikwa gụnyere:

• Ngosipụta Dijitalụ: Two displays show "Time Remaining" and "Room Temperature".
• Bọtịnụ:
  • Tọọ oge: Adjusts the sauna operating time.
  • Tọọ okpomọkụ: Adjusts the desired sauna room temperature.
  • Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
  • Mgbanwu/ Gbanyụọ: Controls the sauna room lighting.
  • Gbanyụọ/ Gbanyụọ: Powers the sauna heater on or off.
  • Àkụ elu/ala: Used to increase or decrease time and temperature settings.

6.2 Basic Arụmọrụ

1. Gbanyụọ/ Gbanyụọ: Pịa Gbanyụọ/ Gbanyụọ button to turn the sauna heater system on or off.
2. Oge nhazi:
   1. Pịa Tọọ Oge bọtịnụ.
   2. Jiri ihe Àkụ elu/ala to adjust the desired operating time.
   3. The display will show the remaining time during operation.
3. Ntọala okpomọkụ:
   1. Pịa Tọọ okpomọkụ bọtịnụ.
   2. Jiri ihe Àkụ elu/ala to adjust the desired room temperature.
   3. Ngosipụta ga-egosi okpomọkụ ụlọ dị ugbu a.
4. Controlling Light: Pịa Gbanyụọ/ Gbanyụọ button to toggle the sauna room light.
5. Nhọrọ ụdị: If your sauna heater supports multiple modes, press the Mode A/B bọtịnụ ka ịgbanwee n'etiti ha.

7. Nlekọta

Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.

• Nhicha: Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Nyocha: Periodically check all wiring connections for tightness and signs of wear or damage.
• gburugburu: Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.

WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.

8. Nchọpụta nsogbu

If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:

• Enweghị ike:
  • Check the main power supply to the control box.
  • Gbaa mbọ hụ na echekwabara njikọ eletrik niile.
  • Chọpụta na Gbanyụọ/ Gbanyụọ pịa bọtịnụ.
• Ọgụgụ Okpomọkụ Na-ezighi Ezi:
  • Ensure the temperature probe is correctly installed and connected to the control panel.
  • Check for any obstructions around the temperature probe that might affect its reading.
• Sauna Heater Not Heating:
  • Verify that the desired temperature is set higher than the current room temperature.
  • Check the operating time setting; ensure sufficient time is allocated.
  • Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).

Maka okwu na-adịgide adịgide, biko kpọtụrụ nkwado ndị ahịa.

9. Ndụmọdụ onye ọrụ

To enhance your sauna experience and ensure the longevity of your equipment:

• For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
• Always ensure proper ventilation in the sauna room.
• Regularly check the sauna stones and replace them if they are cracked or crumbling.

10. Akwụkwọ ikike na nkwado

10.1 Ozi akwụkwọ ikike

The AMAZON CON4 Sauna Stove Controller comes with the following warranty:

• Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
• Igwe kpo oku: Three (3) months or ninety (90) days warranty.

The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.

Akwụkwọ ikike ahụ anaghị ekpuchi mmebi sitere na:

• Incorrect use or operation.
• Negligence or accidental breakage.
• Improper power connection.
• Modification or repair by unauthorized personnel.

After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.

10.2 Nkwado ndị ahịa

For any questions, technical assistance, or warranty claims, please contact us:

• WhatsApp: +86 155766507
• Email: 1434250503@qq.com
• WeChat: 15576650740