UP Travel Bluetooth Transmitter and Receiver Hi-Fi DAC Audio
“
Specifications:
- Power Source: USB-C 5V/0.5A
- Audio Input: AUX Plug (3.5mm Male), USB-C
- Mic: Built-in microphone
- Battery: Rechargeable battery
- Codec Formats: SBC, AAC (RX only), aptX, aptX HD, aptX
Adaptive, aptX Low Latency (TX only), LDAC, LHDC/HWA (RX only) - Sample Rate: 44.1-48kHz, 88.2-96kHz
Product Usage Instructions:
1. Powering On and Pairing:
To power on the device, press the Power button. Use the AUX Plug
for Device Selector A & B. Pair your device by following the
Voice Prompt and Mode Switch for RX/TX.
2. Mode Selection:
Toggle between TX Mode and RX Mode using the Mode Switch. For
TX/RX Mode Selector, use the appropriate switch.
3. Codec Format Selection:
Choose the desired codec format by pressing the Codec Selector
button for cycling through options. Long press to select a specific
codec and sample rate.
4. Device Selector and Pairing:
Short press the Device Selector for A/B to cycle between
devices. Long press to initiate pairing with Bluetooth Available
Devices.
5. Charging the Battery:
Charge the battery using the USB-C 5V/0.5A Battery Charge Input.
Check the Battery Status LED for charging status.
FAQs:
Q: How do I connect via phone?
A: Turn on the device and select UP Travel. Use the Mode Switch
to swipe left or right to establish the connection.
Q: How can I access the mobile app?
A: Scan the provided QR code to access the setup video for the
mobile app.
“`
Quick Start Guide
1 Power
Power ON Light press: AUX 90° Heavy press: AUX 180°
AUX Plug (3.5mm Male) Device Selector (A & B)
Pairing `A’ Device LED Battery LED
USB -C Audio / Power Input
Power ON AUX Eject / Retract
Mode Switch (RX/TX)
Status LED Codec LED `B’ Device LED
Voice Prompt Codec Selector
USB-C 5V/0.5A Battery Charge Input 2 TX Mode
Mic
AUX Input
Battery Status LED
50% – 100% 21% – 49% 20% Charging Fully Charged
Output
Or USB -C Audio Input
3 RX Mode
5 TX/RX Mode Selector
AUX Output 4 `A’ / `B’ Device Selector / Pairing
Or USB -C Input Input
Short press: Cycle Selector
A + B
A
B
Long press: Pairing
Bluetooth Available Devices
UP Travel
Pair
Connect via phone: Turn on select UP Travel.
RX
TX
Mode Switch: Swipe left/right
6 Codec Format Selector and LED / Voice Prompt
Short press: Codec cycle
USB DAC 44.1-48kHz
88.2-96kHz
LED
RX & TX
SBC AAC (RX only) aptX aptX HD aptX Adaptive aptX Low Latency (TX only)
LDAC LHDC/HWA (RX only)
Long press: Codec and sample rate
mobile app
Scan QR code for Set-Up Video
Ver1.0
Documents / Resources
 |
ifi UP Travel Bluetooth Transmitter and Receiver Hi-Fi DAC Audio [pdf] User Guide UP Travel Bluetooth Transmitter and Receiver Hi-Fi DAC Audio, UP Travel, Bluetooth Transmitter and Receiver Hi-Fi DAC Audio, Receiver Hi-Fi DAC Audio, DAC Audio, Audio |