SBOX-100-QM87i-QGW Maritime Embedded System
“
Product Information
Specifications
- Form Factor: SBC Form Factor
- System Cooling Method / System Fan:
Fanless - Chipset: QTS Gateway OS
- Memory Max: (Not provided in the text)
- Drive Bays: (Not provided in the text)
- I/O Interface: (Not provided in the text)
- Display: (Not provided in the text)
- Audio I/O Interface: (Not provided in the
text) - Serial Power: (Not provided in the text)
- Input Power Consumption: (Not provided in the
text) - Operating Temperature: (Not provided in the
text) - Safety & EMC: (Not provided in the
text) - Humidity: (Not provided in the text)
- Dimensions: 290 x 75 x 225 mm
- Weight: 4.08 kg / 6.03 kg
- Color: Black
- Expansion Slots: 2 x Full size
Product Usage Instructions
Installation
1. Place the fanless box PC on a stable surface.
2. Connect the necessary cables and peripherals to the I/O
interfaces.
3. Power on the system and follow the setup instructions for QTS
Gateway OS.
Maintenance
1. Regularly clean the exterior of the fanless box PC to prevent
dust buildup.
2. Ensure proper ventilation to prevent overheating.
3. Check for software updates for the QTS Gateway OS
periodically.
Troubleshooting
If you encounter any issues with the fanless box PC, refer to
the user manual for troubleshooting steps or contact customer
support for assistance.
FAQ
Q: What is the maximum memory supported by the system?
A: The maximum memory supported is not provided in the manual.
Please check with the manufacturer for specific details.
Q: How do I power on the system?
A: To power on the system, connect it to a power source and
press the power button located on the fanless box PC.
“`
Embedded System > QTS Gateway > Fanless Box PC with QTS Gateway OS
SBOX-100-QM87i-QGW
Maritime Embedded System
Features
» Fanless marine computer with 4th Generation Intel® CoreTM i5 dual-core processor » -15°C ~ +55°C wide temperature » Isolation protection 4 x RS-232/422/485 isolated serial ports Isolated 18 V~36 V DC input 2 x Isolated CAN-bus 2.0B » 2 x 2.5″” SSD bay with RAID 0/1 function » Supports IEI iRIS-2400 (IPMI 2.0 compliant)
Specifications
Form factor SBC Form Factor System Cooling method / System Fan Chipset Memory Max.
Drive Bays I/O Interface Display
Audio I/O Interface
Serial Power
Intel® mobile CoreTM i5-4400E (2.7 GHz, 37W)
Fanless Chipset: Intel® QM87 2 x 204-pin DDR3 SO-DIMM slot (system max. 16 GB) Pre-installed 4 GB DDR3 SO-DIMM 2 x 2.5″ SATA 6Gb/s SSD bay with RAID 0/1 function
1 x VGA 1 x DVI-D 1 x HDMITM 1 x Line-out, 1 x Line-in, 1 x Mic-in 1 x PS2 (KB/MS) 2 x USB3.0 2 x USB2.0 2 x RJ-45 with teaming support 1 x PCIe GbE by Intel® I217LM 1 x PCIe GbE by Intel® I210-AT (2 with 2 kV isolation) 1 x DB-9 (non-isolated) 4 x RS-232/422/485 (with 2.5 kV isolation) 2 x CAN-bus (with 2.5 kV isolation) 2 x Antenna SMA hole (reserved) 1 x DB-9 (non-isolated) 4 x RS-232/422/485 (with 2.5 kV isolation)
Input Power consumption
Environment Operating Temperature Safety & EMC
Humidity Dimensions Dimensions Weight Weight Color Color Expansion Slots Expansion Slots
Terminal block: Isolated 24V DC (18~31.2 V DC) 100 W (Intel® mobile CoreTM i5-4400E with 4 GB DDR3 memory)
-15°C ~ 55°C (5°F ~131°F) with air flow (SSD) EMC/CE/FCC/DNV, IEC 60945 4th, IACS-E10, IEC 61174 compliant IP rating: IP22 compliant rear cover 5% ~ 95%, non-condensing
290 x 75 x 225
4.08 kg / 6.03 kg
Black
2 x Full size
Ordering Information
SBOX-100-QM87i-QGW-R10
Fanless marine computer with Intel® Mobile CoreTM i5-4400E 2.7GHz Processor ,DDR3 8GB, iRIS-2400 supported, with QTS-Gateway, isolated 18~36V DC, RoHs
Packing List
1 x User manual 1 x Rubber pad & screw pack
1 x PS/2 cable
Powered by TCPDF (www.tcpdf.org)
Documents / Resources
 |
iEi SBOX-100-QM87i-QGW Maritime Embedded System [pdf] Instruction Manual SBOX-100-QM87i-QGW Maritime Embedded System, SBOX-100-QM87i-QGW, Maritime Embedded System, Embedded System, System |