iDeal LED HCL001-3 Smart Fairy Lights
In order to ensure the safe and correct use of the product, please read this manual carefully before use, and properly save it for v1ew1ng.
Product parameters
|
IP Rating |
IP65 |
| Voltage and current | 5V2A |
| Power | 5W |
What is in the box?
| LED lights | 1 |
|
Remote control |
1 |
|
User manual |
1 |
Product Usage Instructions
How to connect to the APP?
- Search for iDeal LED in the App Store for iPhone and the Google Play for Android.
- Use a mobile browser to scan the QR code and enter the download page. Select the appropriate way to install.
- When the app is installed for the first time, the page will pop up the “Allow browser to install apps” option, please check “Allow”.
- Note: When you first enter APP, is the “iDealled” option allowed to get device location information? Will emerge. Please select Allow only when in use.
Language settings 
First of all, be sure to turn on bluetooth and GPS on your phone. Open the App and click the searched intelligent lamp string to enter the operation interface, click buttonThe
- connected intelligent lamp string will automatically connect next time. Click on the button and scroll to the right, indicating that the connection is successful.
- Change the corresponding number of lights in the settings according to the specifications of the purchased product
- to enter the DIY interface
- to enter the scene display interface
- to enter the collection display interface.
- To enter the loop playing interface.
- To enter the camera colour selection interface.
- To enter the interface of music rhythm and sound control.
- To enter the timing interface.
- To enter the setting interface.
- To control the on and off of the lamp string system.
Click on the button to link two sets of lights together (buy two sets and support up to four sets). Click on the button two sets of lamps can be connected in parallel (two sets must be purchased, and up to four sets are supported)
DIy
- Paint your favourite colour into the position of any lamp
- The brightness of the light can be adjusted arbitrarily
- The following figure shows the detailed operation panel
Scenes
- A variety of scenes can be chosen.
- You can add and delete colours according to your preferences. And you can adjust the direction of running, the brightness and speed.
- Collect
- The favourite list can only be used if it has been favourited in other interfaces. The list will show all the favourite modes.
- Cycle
- Click + to create cycle mode, select your favourite mode, and set cycle duration.on
- Click + to create cycle mode, select your favourite mode, and set cycle duration.on
- Camera
- E 1 Set the colour point to the desired colour, and the lamp will change to the selected color
- E2: Aim at the colour you want to take, and press the colour button to take the colour.
- E 1 Set the colour point to the desired colour, and the lamp will change to the selected color
Rhythm
- F: Music rhythm interface. The APP will read the local song of the phone, and the light will root when the music is p.layed Rhythm according to the melody of the song, you can also choose different patterns of rhythmTurnl: Tum on the microphone mode of the phone, the phonrecognisecognize the surrounding sound, and the light will follow the sound . The size of the volume for rhythm can be chosen from different rhythm modes.
- F2: Turn on the microphone mode, and the speaker module of the smart string recognises the sounds around it and beats them according to
- Note: The following dialogue box will appear when you use the APP for the first time. Please check “Allow” and continue the operation.
- Timer
- The timing function, you can set multiple switch lights at the same time.
- The timing function, you can set multiple switch lights at the same time.
- Settings
- Colour correction Can be used to calibrate the colour of the headlight bar.
- Number of lights: You can set the number of lights in each
- segment of the string. Device information: Displays the hardware and software information of the device
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if rx)t installed and used in the instructions, may cause harmful interference to radio cornmuniætions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be corrected by turning the equipment off and moving, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer and an experienced radio/TV technician for help
- Caution: My changes or modifications to this device are ot explicitly approved by the manufacturer and could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and verified with h minimum distance of 20 cm between the radiator and your body.
Notes
- Please take care of children aged 0-6 to prevent accidental ingestion.
- Do not put this product in water or use it near a fire source.
- If there is a knot during use, please do not pull it hard.
- Do not disassemble the product without authorisation.
- Frequent switching will affect the service life of the product. If you do not use this product for a long time, please cut off the power and keep it in a cool and dry place.
We will test each set of products before delivery, but it may be damaged during transportation. Please test after receiving the product. If you encounter any problems during use, please contact the seller in time. And we will find the most suitable solution.
Documents / Resources
 |
iDeal LED HCL001-3 Smart Fairy Lights [pdf] Instruction Manual HCL001-3, HCL001-3 Smart Fairy Lights, Smart Fairy Lights, Fairy Lights, Lights |