S8 Pro Smartwatch

Watch 8

Getting Started

1. Initial Setup: Open the package and follow the steps to connect the strap to the smartwatch.

2. Power On: Wear the smartwatch and press and hold the button to turn it on.

3. Device Setup: Open the M2 Wear app on your phone to set up the device.

4. Charging: To charge, place the back of your watch on the wireless charger.

Buttons and Touch Controls

Knob Button:
- Short press on the dial page to enter the menu; short press to return to the dial.
- Double press on the menu page to switch menus.
- Rotate to zoom icons, turn pages, etc.
- Short press on other pages to return to the dial page.
Switch Button: Long press to switch on/off.
Swipe Up: Shortcut button.
Swipe Right: Move in effect.
Down: Shortcut button.

Connecting the Watch

Download M2 Wear App: Install the M2 Wear app on your mobile phone by searching for it in the app store or scanning the provided QR code.

Connection Methods:

Scan Code Connection: After the watch is turned on, navigate to the dial page and swipe right to access the split-screen function. Click the "scan code connection" shortcut button. The connection QR code will appear, which you can scan using the M2 Wear app.
Manual Connection: Ensure Bluetooth is enabled on your mobile phone. Open the M2 Wear app and search for the device to connect manually.

Connect Call Bluetooth: Initially, Bluetooth for calls and music is off. Slide up to open the shortcut menu and enable the call Bluetooth switch. On your phone's Bluetooth settings, find the corresponding Bluetooth name and connect. This enables call and music functions.

Watch Operating Instructions

Split Screen Function: Swipe right across the screen to access; swipe left to go back.
Dial Page: Rotate the encoder to navigate pages up and down, and tap the screen to select a dial. The system has 10 preset dial pages, with the last one being "custom," which can be changed via the app's dial market.
Menu Page: Press the side key on the dial page to enter the menu. Double press the side key to switch menus, and press the side key to return to the main dial page.
Function Page: Tap application icons on the menu page to enter functions. Swipe right to go back, and press the side key to return to the main dial page.

NFC Function Requirement

Connect your mobile phone with NFC to the watch and scan the card bag in the app. The watch supports non-encrypted Mifare cards with a frequency of 13.56 MHz (default key) and other UID cards that do not support CPU cards. For security reasons, cards with key functions, door cards with stored value consumption, and bus consumption functions cannot be simulated. Even if simulation is successful, these cards will not have BanBus or other functions.
Open the NFC card package in the app and follow the prompts to add an NFC card package.
The watch supports entry card recording through community management offices or proper management offices.
For door locks, enter the access control administrator mode. The entry administrator can then paste the watch directly for entry.

Function Introduction

Phone: Add mobile phone contacts to the address book. Make calls when the phone is connected. View call records.
Motion Recording: Records daily exercise data including calories, activity time, steps, and distance.
Alipay: Bind Alipay to the watch for offline payments via a two-dimensional code.
Heart Rate: Wear the watch on the wrist bone above the arm for accurate real-time heart rate measurement. Normal heart rate is 60-90 beats/min. Records the last 7 measurements, highest, and lowest values.
Blood Pressure: Wear the watch above the hand mouth of the blood wrist bone. Measures and records blood pressure, typically around 7 times in the morning.
Blood Oxygen: Wear the watch above the hip of the wrist bone. Measures blood oxygen levels, recording the last 7 measurements and the highest and lowest values.
Can Switch Time: Adjust the time in the settings.
Short Video Remote Control: Download and use the short video remote control feature via the app.

Additional Features

Sleep: Monitors sleep quality every night.
Outdoor Sports: Tracks walking, running, cycling, mountain climbing, and indoor running. Records steps, calories, and heart rate, allowing for sports goal setting.
Breathing Training: Promotes relaxation and stress relief. Offers three frequency choices (slow, normal, slightly fast) with a duration of 1-5 minutes.
Music Control: Control music playback via the app.
Stopwatch: Supports stopwatch timing.
Mett: Converts daily exercise into Mett value, providing a visual representation of weekly exercise effort.
Temperature: Monitors body temperature using scientific health algorithms.
Set Up: Includes options for clock, profile, display, password lock, voice, sidebar, and factory reset.
Timer: Watch seconds change timer.
Weather: Synchronizes weather information via the app.

Bluetooth Data Transmission

When connected to a mobile phone via Bluetooth, the watch synchronizes data such as weather, notifications, and sports health data. Data synchronization stops when Bluetooth is disconnected or turned off.

Recharge

Place the back of the watch on the wireless charger to begin charging. Charging instructions will be displayed on the watch screen.

Note:

Do not charge in humid environments with water.
Ensure the watch back and wireless charger surface are clean and in complete contact.
Clean the watch back and charger surface with a flannel cloth for optimal charging.
This product does not include a power adapter. Use a computer USB port or a 5V--1A power adapter. Purchase adapters from reputable sources to avoid issues.

Precautions

Measurement results are for reference only and not for medical diagnosis. Follow doctor's instructions and do not self-diagnose.
The waterproof grade is IP67. It is not suitable for deep diving or prolonged water immersion. It is also not resistant to hot water, as water vapor can affect the device.
The company reserves the right to modify manual contents without notice. Minor variations may occur due to software updates.