1. Pendahuluan
Thank you for choosing the VEVOR 10-inch Benchtop Drill Press. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and retain it for future reference.
Figure 1: VEVOR 10-inch Benchtop Drill Press Overview
2. Petunjuk Keselamatan
Selalu utamakan keselamatan saat mengoperasikan perkakas listrik. Kegagalan mengikuti petunjuk ini dapat mengakibatkan cedera serius atau kerusakan properti.
- Baca Manualnya: Pahami semua prosedur pengoperasian dan peringatan keselamatan sebelum digunakan.
- Gunakan Alat Pelindung Diri (APD): Always wear safety glasses or a face shield. Hearing protection and dust masks are recommended.
- Benda Kerja yang Aman: Selalu clamp the workpiece firmly to the worktable to prevent movement during drilling. Never hold the workpiece by hand.
- Area Kerja Bersih: Jagalah area kerja tetap bersih, cukup terang, dan bebas dari kekacauan.
- Hindari Gangguan: Do not operate the drill press when tired, under the influence of drugs, alcohol, or medication.
- Proper Clothing: Do not wear loose clothing, gloves, neckties, or jewelry that can get caught in moving parts. Tie back long hair.
- Keamanan Listrik: Pastikan catu daya sesuai dengan kebutuhan alat. Jangan mengoperasikan alat dalam kondisi mati total.amp atau kondisi basah.
- Cabut Sebelum Penyesuaian: Always disconnect the power before changing accessories, making adjustments, or performing maintenance.
- Gunakan Kecepatan yang Benar: Pilih kecepatan pengeboran yang sesuai untuk material dan ukuran mata bor.
- Alat Pemeliharaan: Jaga agar alat tetap tajam dan bersih untuk kinerja yang lebih baik dan lebih aman.
3. Komponen Produk
Familiarize yourself with the main parts of your VEVOR Benchtop Drill Press.
Gambar 2: Komponen Utama Mesin Bor
- 5-Speed Adjustable Pulley System: Allows for variable speed settings.
- 6.2A Motor: Powerful induction motor for consistent performance.
- Secure & Waterproof Switch: Main power switch with safety features.
- 1/2 Inch Chuck: Holds various drill bit sizes securely.
- Φ1.89" Thickened Column: Provides stability and rigidity.
- Steel Plate Worktable & Base: Durable and stable platform for workpieces.
4. Pengaturan
Follow these steps to assemble your drill press.
- Membongkar: Keluarkan semua komponen dari kemasan dengan hati-hati. Periksa apakah semua bagian ada dan sesuaikan dengan daftar kemasan.
- Perakitan Alas dan Kolom: Attach the column to the base using the provided fasteners. Ensure it is securely tightened.
- Ketua Majelis: Mount the drill press head onto the top of the column. Secure it in place with the appropriate screws or clamps.
- Instalasi Meja Kerja: Slide the worktable assembly onto the column. Adjust its height and secure it using the locking handle.
- Menangani Instalasi: Attach the feed handles to the spindle quill.
- Pemasangan Chuck: Insert the chuck onto the spindle. Ensure it is seated firmly.
- Sambungan Daya: Sambungkan kabel daya ke stopkontak listrik yang sesuai.
For visual guidance on assembly, refer to the following video demonstrating a similar drill press setup process.
No specific assembly video for this model is available from the seller. Please refer to the written instructions and diagrams.
5. Petunjuk Pengoperasian
5.1 Daya Hidup/Mati
To turn on the drill press, press the green 'ON' button. To turn it off, press the red 'OFF' button. The switch is designed to be secure and waterproof.
5.2 Penyesuaian Kecepatan
The VEVOR drill press features a variable 5-speed control system, allowing speeds from 610 to 2800 RPM. To adjust the speed, open the top cover and reposition the drive belt on the pulleys according to the desired RPM. A diagram inside the cover typically indicates the belt configurations for different speeds.
Figure 3: Adjusting Belt for Speed Control
5.3 Penyesuaian Kedalaman
Set precise drilling depths using the adjustable depth stop. This feature ensures consistent hole depths, which is crucial for repetitive tasks. The spindle travel is 2 inches.
Figure 4: Setting the Adjustable Depth Stop
5.4 Penyesuaian Meja Kerja
The thick metal worktable can be adjusted in height and tilted up to 45 degrees left or right. Loosen the locking mechanism, adjust the table to the desired position, and then securely tighten the lock.
Figure 5: Adjusting and Tilting the Worktable
5.5 LED Lighting & X-Ray Positioning
An integrated LED work light illuminates your work area for clear visibility, even in low-light conditions. The X-ray positioning system assists in accurately locating drilling spots for precision work.
Figure 6: Using LED Light and X-Ray Positioning
5.6 Pengoperasian Chuck
The 1/2-inch chuck securely holds various drill bits. To insert or remove a drill bit, use the chuck key to loosen or tighten the jaws. Ensure the bit is centered and firmly secured before operation to prevent slippage and ensure precision.
Figure 7: Chuck and Drilling Diameter
6. Pemeliharaan
Perawatan rutin memastikan umur pakai dan kinerja optimal mesin bor Anda.
- Pembersihan: Keep the machine clean and free of dust and debris. Use a brush or vacuum to remove sawdust.
- Pelumasan: Periodically lubricate moving parts, such as the column and quill, with light machine oil.
- Inspeksi Sabuk: Check the drive belt for wear, cracks, or tension. Replace if necessary and ensure proper tension for optimal speed transfer.
- Perawatan Chuck: Keep the chuck jaws clean and free of rust. Apply a small amount of lubricant if they become stiff.
- Pemeriksaan Pengikat: Regularly inspect all nuts, bolts, and screws for tightness. Tighten any loose fasteners.
- Pemeriksaan Kabel Listrik: Check the power cord for any damage. Do not use the tool if the cord is frayed or damaged.
7. Penyelesaian masalah
Bagian ini membahas masalah umum yang mungkin Anda temui dengan mesin bor Anda.
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Motor tidak menyala | No power supply; Faulty switch; Overload protection tripped. | Check power connection; Inspect switch; Reset circuit breaker. |
| Getaran atau kebisingan yang berlebihan | Loose components; Worn belt; Unbalanced drill bit. | Tighten all fasteners; Check and replace belt; Ensure drill bit is properly installed and not bent. |
| Mata bor tidak memotong secara efisien. | Dull drill bit; Incorrect speed for material; Insufficient feed pressure. | Replace or sharpen drill bit; Adjust speed according to material; Apply steady, appropriate feed pressure. |
| Workpiece moves during drilling | Workpiece not securely clampdiedit oleh: | Selalu gunakan clamps or a drill press vise to secure the workpiece. |
Jika Anda mengalami masalah yang tidak tercantum di sini atau jika solusi yang diberikan tidak menyelesaikan masalah, silakan hubungi dukungan pelanggan VEVOR.
8. Spesifikasi
| Fitur | Spesifikasi |
|---|---|
| Merek | VEVOR |
| Nomor Model | DP2501A |
| Tenaga Motor | 6.2A Induction Motor (550 Watts) |
| Jil.tage | 220 Volt |
| Kecepatan yang Dapat Disesuaikan | 5 speeds (610/940/1500/2150/2800 RPM) |
| Diameter Pengeboran Maksimum | 1/2 inci (13 mm) |
| Perjalanan Spindle | 2 inci |
| Kemiringan meja kerja | 0-45° Left/Right |
| Fitur Khusus | LED Work Light, X-Ray Positioning, Variable Speed |
| Dimensi Produk | 49.53 x 24.89 x 73.91 cm (19.5 x 9.8 x 29.1 inci) |
| Berat Barang | 23 kg (50.7 pon) |
Gambar 8: Dimensi Produk dan Spesifikasi Utama
9. Garansi dan Dukungan
Untuk informasi garansi, dukungan teknis, atau pertanyaan layanan, silakan merujuk pada kartu garansi yang disertakan dengan produk Anda atau kunjungi situs web resmi VEVOR websitus. Simpan struk pembelian Anda sebagai bukti pembelian.
Dukungan Pelanggan: For assistance, please contact VEVOR customer service through their official channels. Details can typically be found on the product packaging or the VEVOR brand weblokasi.
